3DBenchy

The unique geometric features of the 3DBenchy have allowed it to become the most comprehensive calibration print that is readily available to the public. These geometric features provide users with visual benchmarks to assess a large variety of 3D printing capabilities. Visual assessments of a 3DBenchy can be made using the geometric characteristics below.{{cite web |last1=CreativeTools |title=#3DBenchy - the Tool to Calibrate and Test Your 3D Printer |url=https://www.instructables.com/3DBenchy-The-tool-to-calibrate-and-test-your-3D-pr/ |website=Instructables |publisher=AUTODESK |access-date=22 February 2024}}

• Hull (Surface Deviations): The 3DBenchy has a sizeable hull for its objectively small volume (15.55 cm³). The hull of the 3DBenchy is a smooth, round, and overhanging surface that blatantly reveals any surface deviation issues.
• Bilateral Symmetry (Skewness and Warping): The 3DBenchy is bilaterally symmetric. Printer skewness and warping are uncovered by variations in the symmetry of the 3DBenchy.
• Chimney Top, Main Deck, and Rear Box (Parallelism): The bottom surface of the 3DBenchy is perfectly horizontal and planar. If printed correctly, the top of the chimney, main deck, and rear box behind the cabin of the 3DBenchy are parallel to the bottom surface.
• Nameplate (Resolution): The 3DBenchy features a small nameplate located in the center of the stern. The name “#3DBenchy” is engraved into the nameplate. This nameplate prints seamlessly if the resolution settings are configured correctly.
• Cabin Roof Bridge (Overhang): Overhang issues are often the pinnacle of a 3D printer’s weakness. The bridged roof and arched side doors of the 3DBenchy’s cabin include complex and secluded geometry that distinctly reveal overhang issues.
• Acute Angled Surfaces (Layer Shifting): The bridged roof of the cabin and gunwale of the 3DBenchy were designed to incorporate acute angles. These acute angles portray a 3D printer’s layer-stepping capability. Layer-shifting issues are present if the layer-stepping on the 3DBenchy does not print correctly.
• Shallow Bottom Characters (First Layer Issues): The characters “CT3D.xyz” are embedded in the bottom surface of the 3DBenchy. These characters are shallow and expose first-layer issues and squashing when present.

The nominal dimensions of the 3DBenchy provide a measurable baseline to accurately assess variation. The dimensions of the 3DBenchy can easily be measured with a caliper. The nominal dimensions of a 3DBenchy, using a 1:1 scale, are listed below.{{cite web |last1=Pollen AM |title=Torture Test Analysis |url=https://www.pollen.am/torture_test_analysis/ |website=Pollen AM Tortue Test - Analysis |publisher=Pollen AM |access-date=22 February 2024}}

• Cabin Roof Bridge: The diagonal length of the cabin roof bridge is 23.00 mm.
• Chimney: The chimney, located on top of the cabin roof, has an outer diameter of 7.00 mm. It features a hole that is 3.00 mm in diameter and 11.00 mm deep.
• Overall Length: From bow to stern, the 3DBenchy measures 60.00 mm in length.
• Overall Width: From port to starboard, the 3DBenchy measures 31.00 mm in width.
• Overall Heights: The height of the 3DBenchy is commonly measured from the top of the chimney and the top of the box behind the cabin to the bottom surface. From the top of the chimney, the 3DBenchy measures 48.00 mm in height, and from the box, 15.50 mm.
• Rear Box: The rear box, located behind the cabin, has an exterior width of 12.00 mm and an exterior length of 10.81 mm. The interior of the box measures 8.00 mm in width, 7.00 mm in length, and 9.00 mm in depth.
• Hawsepipe:- The hawsepipe of the 3DBenchy, located near the front of the hull, features an inner diameter of 4.00 mm and a minuscule flange thickness of 0.30 mm.
• Front Cabin Window: The rectangular front cabin window of the 3DBenchy features an interior width of 10.50 mm and an interior height of 9.50 mm.
• Rear Cabin Window: The circular rear cabin window features an inner diameter of 9.00 mm and utilizes a minute flange that is 0.30 mm thick with an outer diameter of 12.00 mm.
• Bow Angle: The 3DBenchy employs a high-cain spoon bow design with an overhang angle that measures 40° from the bottom surface.
• Cabin Roof Angle: The top surface of the cabin roof is designed at an acute angle of 5.5° from the horizontal plane.
• Nameplate Thickness: The nameplate, located in the center of the stern, utilizes a minuscule thickness of 0.10 mm.

3D-printed 3DBenchy by Creative Tools.jpg|A 3DBenchy printed on a fused filament fabrication (FFF) 3D printer

3DP Biggest Large Benchy.jpg|A 10x size (60 cm x 31 cm x 48 cm) 3DBenchy printed in PLA, made on a large-format FFF printer.

3DBenchy printed on a resin printer.jpg|A 3DBenchy printed on a stereolithography (SLA) 3D printer with support material still attached

3DBenchy created using color mixing on an FDM printer.jpg|A multi-material 3DBenchy created on a Prusa i3 using a color-mixing hot end; each part of the boat has been created in a different colour.

3DBenchy measured with tiny caliper.jpg|3DBenchy being measured with a caliper-like keyring

3 3D printed 3DBenchy models with different faults.jpg|3DBenchys printed on a FFF 3D printer showing different faults caused by miscalibration

Printing Benchys with Hangprinter v4.webm|Two 3DBenchys being printed on a Hangprinter

• Standard test image
• Stanford bunny
• Utah teapot
• Suzanne (3D model)

{{Reflist}}

• {{official website}}
• [http://www.3dbenchy.com/download/ Download 3DBenchy]
• [https://www.thingiverse.com/thing:763622 3DBenchy Thingiverse Page]

{{Standard test item}}

Category:DIY culture

Category:Computer output devices

Category:Engineering projects

Category:3D graphics models

Category:Test items

Category:Fused filament fabrication

Category:3D printing

Category:Boats