Arthur Kill Bridge

Although a temporary pontoon bridge to Elizabeth, New Jersey was built by the British during the Revolution, Staten Island was usually accessible only by ferry to New Jersey or by private boat. It was not until 1810 that regular ferry service was established to Manhattan.

As early as 1850, campaigns for a bridge to Bayonne, New Jersey were begun by some summer residents of the island, although opposed by many permanent residents. In 1870 the New York State Legislature passed a bill authorizing a swing-span bridge from New Brighton, Staten Island to Ellis Island via Robbins Reef. A charter was granted to the Staten Island Bridge Company, but the project was eventually abandoned due to fiscal constraints.Sharon Reier. The Bridges of New York, Dover Publications, Inc., pp. 109-110. {{ISBN|0-486-41230-X}}

The proposal to build a railroad bridge over the Arthur Kill existed from at least 1886, when Erastus Wiman, a developer who was founder and president of the Staten Island Railway, persuaded the Baltimore and Ohio Railroad to finance a bridge over the Arthur Kill in exchange for use of Wiman's railroad facilities on the island.

In the summer of 1886 the Board of Army Engineers for Fortifications held a hearing at the Army Building in Manhattan to determine the preferred location for the interstate bridge that had recently been authorized by Congress. Speaking in favor of the bridge were representatives of the Baltimore and Ohio Railroad and Erastus Wiman. Opposed to the proposed location were Senator Chase, representing the Pennsylvania Railroad, and I. L. Fisher of the Bee Towing Company. The opponents preferred building a {{convert|70|ft|m|2|adj=mid|high}} bridge near Buckwheat Island, about {{convert|1|mi|spell=in}} south of the proposed location. The Board reported to the Secretary of War."The Arthur Kill Bridge", The New York Times, August 28, 1886 (Note: The article refers to "Senator Chase", possibly intending Jonathan Chace of Rhode Island.)

File:Baltimore & Ohio Viaduct Under Construction Over the Arthur Kill Connecting Staten Island and New Jersey.png

The approved bridge was designed by Charles Ackenheit (or AckenheilThe surname is spelled Ackenheil in the 1886 New York Times article.), the chief engineer for the Baltimore and Ohio Railroad. The cost was approximately $500,000. Construction occurred from 1887 to 1889 and the bridge opened with ceremony on January 1, 1890. It was also called the "Achter Kill Bridge" after the alternate spelling and pronunciation of Arthur Kill. At the time of its completion, it was the longest of its type in the world.{{cite book |last=Pitanza |first=Mark |title=Staten Island Rapid Transit |year=2015 |location=Charleston, South Carolina |publisher=Arcadia Publishing |page=8 |isbn=978-1467123389}}

It was a swing-span railroad bridge with a center pier, connecting the Howland Hook area of Staten Island to Elizabeth, New Jersey, where tracks could connect with a Baltimore and Ohio branch line. The center span was {{convert|500|ft|m|0}} long, with two fixed {{convert|150|ft|m|1}} side spans, for a total length of {{convert|800|ft|m|0}}. Compared to the {{convert|70|ft|m|2|high|adj=mid}} bridge proposed by the Pennsylvania Railroad, the bridge was built only {{convert|32|ft|m|2}} above Arthur Kill at low water. This would necessitate frequent openings, especially in later years after the kill was dredged and numerous ocean-going ships needed to pass through the strait. In 1952, for example, the bridge was required to be open to allow 13,346 ships to pass. The span was moved by two steam-powered engines. In foggy weather a steam whistle would sound twice to indicate the bridge was closed, or four times so boats would know it was open.

The bridge was used for freight trains. There was never any regular passenger service over the bridge, although during both World War I and World War II, numerous troop trains would deliver soldiers bound for Europe to ships waiting at the Staten Island port of embarkation piers. Also, in October 1957, a train carrying Queen Elizabeth II and Prince Philip from Washington to the Staten Island Ferry during a state visit crossed the bridge.[http://forgotten-ny.com/2007/01/stations-of-the-staten-island-railway-pt-1-and-the-neighborhoods-they-inhabit Forgotten New York: Staten Island Railway]

In late 1952, the swing span was turned by heavy winds and could not be closed for some time. At other times at least one ship crashed into the bridge, and there was at least one case where boats collided while navigating under the bridge. By the 1950s the bridge was considered outdated and a hazard to navigation. A replacement bridge, the Arthur Kill Vertical Lift Bridge, was built {{convert|150|ft|m|1}} away from the Arthur Kill Bridge. The new bridge, financed primarily by the federal government, had a center span {{convert|58|ft|m|1}} longer than the old bridge, with no center pier, and its clearance was more than {{convert|100|ft|m|1}} higher than the old span. The new bridge was inaugurated in August 1959, and the Arthur Kill Bridge was then removed; its granite piers had to be blasted away.

{{reflist}}

• {{Cite news|url=https://www.nytimes.com/1888/03/22/archives/the-arthur-kill-bridge-arguments-for-and-against-the-proposed-plans.html|title=The Arthur Kill Bridge.; Arguments For and Against the Proposed Plans.|date=March 22, 1888|newspaper=The New York Times|issn=0362-4331}}

Category:Railroad bridges in New York City

Category:Railroad bridges in New Jersey

Category:History of Staten Island

Category:Buildings and structures in Elizabeth, New Jersey

Category:Bridges in Staten Island

Category:Bridges in Union County, New Jersey

Category:Swing bridges in the United States

Category:Baltimore and Ohio Railroad bridges

Category:Staten Island Railway