Cutaway (guitar)
{{Short description|Indentation on the guitar body}}
A cutaway on the guitar construction is an indentation in the upper bout of the guitar body adjacent to the guitar neck, designed to allow easier access to the upper frets.
Overview
Cutaway bodies are mainly of interest when discussing acoustic guitars and semi-acoustic guitars; virtually all solid body guitars either have at least one cutaway, or have a body shape (such as the flying V guitar) which does not intrude into the upper neck area.
Some manufacturers denote instrument models with cutaway using the suffix C, such as the Gibson L5C or the Maton CW80C.
{{anchor|Venetian|Florentine|Squared-off}}
Types
{{multiple image
| align = right
| direction = horizontal
| image1 = Gibson Super 400 CES.jpg
| width1 = 100
| caption1 = Venetian {{smaller|cutaway (rounded bout) on Gibson Super 400 CES}}|
| image3 = Gibson CF-100E signed by Bob Dylan, HRC Niagara Falls.jpg
| width3 = 106
| caption3 = Florentine {{smaller|cutaway
(sharp bout, or pointed cutaway)
on Gibson CF-100E}}|
| image5 = Selmer-maccaferri-django-reinhardt-jazz-guitar.jpg
| width5 = 120
| caption5 = Squared-off {{smaller|cutaway on Selmer-Maccaferri guitar by Hanno Kiel}}|
| header = Single cutaway types
}}
There are two main types of cutaways: Venetian and Florentine.{{cite journal
| last = Mottola | first = R.M.
| title = Parametric Models of Guitar Cutaways
| journal = American Lutherie
| issue = 99 | pages = 60
| date = Fall 2009
}} A Venetian cutaway has a rounded bout. A Florentine cutaway has a sharp bout. The terms probably originate with the Gibson Guitar Corporation and probably do not reflect historic
instrument-making practices of Florence and Venice.
{{cite journal
| title = Cutaway Terms
| url = http://www.acousticguitar.com/issues/ag118/QandA118.html
| archive-url= https://web.archive.org/web/20120913142709/http://www.acousticguitar.com/issues/ag118/QandA118.html
| archive-date=2012-09-13
| department= Q & A
| journal = Acoustic Guitar Magazine
| issue = 118
| publication-date = October 2002
}}
A less common third type is the squared-off cutaway, used on the Selmer-Maccaferri guitar and some nylon-string guitars.
{{anchor|Single cutaway}}
Number
Instruments with only a lower cutaway are known as "single cutaway" instruments, and guitars with both are called "double cutaway". These terms are sometimes shortened to "single cut" (such as in the model name for a solid-body electric guitar called the "PRS Singlecut", produced by the Paul Reed Smith company) or "double cut".
=Double cutaway=
{{multiple image
| align = right
| direction = horizontal
| header = Double cutaway guitars
| image1 = 399px-Miss Daisy Light small 2.jpg
| width1 = 95
| caption1 = Fender Stratocaster
| image2 = Gibson '59 Les Paul Junior DC TV Yellow.jpg
| width2 = 72
| caption2 =
||||| image5 = Carlos Santana's guitars - Yamaha SG2000 Devadip (1976), PRS Custom (1988) - MIM PHX.jpg
| width5 = 168
| caption5 =
}}
{{multiple image |align=right |direction=horizontal
| header = Single cutaway guitars
| image1 = Fender Broadcaster (1950), Museum of Making Music.jpg |width1=74
| caption1 = Fender Telecaster
| image2 = Les Paul Traditional.jpg |width2=80
| caption2 = Gibson Les Paul
| image3 = Daniel Catullos office by D Ramey Logan.jpg |width3=181
| caption3 = left: Epiphone Les Paul,
right: PRS Mark Tremonti sig.
}}
As well as the more common lower cutaway, many instruments have an upper cutaway, sometimes smaller than the lower one, or sometimes about the same size. This is mainly seen on electric guitars, as the reduction in body size resulting from a double cutaway would be detrimental to the sound quality of an acoustic guitar. Double cutaways allow the thumb as well as the fingers to move past the neck-body join. In addition, the strap button on double cutaway guitars is typically positioned on the end of the upper horn, further up the neck than on guitars without a cutaway. This improves the instrument's balance when played with a strap. A double cutaway also facilitates left-handed use of right-handed instruments.
In some Gibson guitars, models with two cutaways are abbreviated with a "DC" after the name, such as in the Les Paul Studio DC, the Les Paul Standard DC, the Les Paul Special DC, and the Les Paul Junior DC. Since more single cut versions of these guitars are produced than the doublecut versions, if the model name of these guitars is not followed by "DC", "double cut", or "double cutaway", the assumed reference is to the single cutaway models.