Dim spot

{{Short description|Downward spike in a seismic attribute, often indicative of hydrocarbons}}

File:Seismic dim spot.png

In reflection seismology, a dim spot is a local low-amplitude seismic attribute anomaly that can indicate the presence of hydrocarbons[https://glossary.slb.com/en/terms/d/dim_spot dim spot], Energy Glossary and is therefore known as a direct hydrocarbon indicator. It primarily results from the decrease in acoustic impedance contrast when a hydrocarbon (with a low acoustic impedance) replaces the brine-saturated zone (with a high acoustic impedance) that underlies a shale (with the lowest acoustic impedance of the three), decreasing the reflection coefficient.

Occurrence

For a dim spot to occur, the shale has to have a lower acoustic impedance than both the water sand and the oil/gas sand, which is the opposite situation required for a bright spot to occur. This is possible because compaction causes the acoustic impedances of sands and shales to increase with age and depth but it does not happen uniformly – younger shales have a higher acoustic impedance than younger sands, but this reverses at depth, with older shales having a lower acoustic impedance than older sands.Brown, Alistar. R., (2010), [https://www.searchanddiscovery.com/documents/2010/40514brown/ "Dim Spots in Seismic Images as Hydrocarbon Indicators", AAPG Search and Discovery Article #40514.]

Similarly to bright spots, not all dim spots are caused by the presence of hydrocarbons and therefore they should not be treated as conclusive evidence hydrocarbon accumulations.

See also

References

{{Reflist}}

  • Hilterman, Fred J., (2001), "Seismic Amplitude Interpretation", SEG.

Category:Seismology

{{Seismology-stub}}