EL84
{{Short description|Power pentode vacuum tube}}
{{Refimprove|date=June 2014}}
{{Infobox vacuum tube
|image = El84.JPG
|image_size = 350px
|caption = Common variants of the EL84, manufactured in Russia, Slovakia, and China
|classification = Thermionic Pentode
|service = Audio
|height_in =
|diameter_in =
|weight_lbs =
|cathode_type =
|heater_voltage =
|heater_current =
|filament_voltage =
|filament_current =
|max_dissipation =
|max_current =
|max_voltage =
|pinout = B9A (Noval)
|class_a_amplification_factor =
|class_a_anode_voltage =
|class_a_anode_current =
|lass_a_screen_voltage =
|class_a_bias_voltage =
|class_a_anode_resistance =
|class_c_power_output =
|class_c_anode_voltage =
|class_c_anode_current =
|class_c_screen_voltage =
|class_c_bias_voltage =
|class_ab_power_output =
|class_ab_anode_resistance =
|class_ab_anode_voltage =
|class_ab_anode_current =
|class_ab_screen_voltage =
|class_ab_bias_voltage =
|reference =
}}
The EL84 is a vacuum tube of the power pentode type. It is used in the power-output stages of audio amplifiers, most commonly now in guitar amplifiers, but originally in radios. The EL84 is smaller and more sensitive than the octal 6V6 that was widely used around the world until the 1960s. An interchangeable North American type is the 6BQ5 (the RETMA tube designation name for the EL84).
The EL84 was developed to eliminate the need for a driver tube in radios, so it has rather more gain than is usual in a power pentode. Eliminating a preamplifier triode in radios made them cheaper. Manufacturers were quick to adopt it in general use, and they are found in many old European tube-radios and other audio equipment. A single EL84 was used in low-cost equipment, and a push–pull pair for lower distortion and higher power.
In common with all 'E' prefix tubes, using the Mullard–Philips tube designation, it has a heater voltage of 6.3V. It can produce 17W output in Class AB1 in push–pull configuration. Many guitar-amplifiers routinely run EL84 tubes in excess of 400VDC, with the Traynor Guitarmate reportedly putting out 25W RMS with 2 EL84s in a push–pull configuration and a B+ between 400 and 420 VDC.
Developed by Philips in 1953, and used in the British Mullard 5-10 amplifier circuit, the EL84 came to prominence when used in Watkins (and later the Vox) amplifiers preferred by many British Invasion bands of the 1960s.{{Citation needed|date=March 2012}}
N709, 6BQ5/EL84/6P15, and other exact equivalents
The 1959 Miniwatt Technical Data book from Philips lists the 6BQ5 as the R.E.T.M.A. (American) name for the EL84 in its "Type Number Cross Reference",{{cite book|title="Miniwatt" Technical Data|date=1958|publisher=The "Miniwatt" Electronics Division of Philips Electrical Industries Pty. Limited|location=20 Herbert Street, Artarmon, N.S.W., Australia|page=158|edition=6th}} and hence an exact substitute. American and Japanese manufacturers might label their versions of the EL84 as EL84/6BQ5 or 6BQ5/EL84{{cite book|title=Sylvania Receiving Tubes Technical Manual|publisher=reprinted by Audio Amateur Press|page=124|edition=14th}} or simply "6BQ5". Other manufacturers followed with their versions, such as the N709 from General Electric Co. Ltd. of England and the 6P15 from UK brand Mazda, that were designed to be drop-in substitutes. CV2975 is the military designation (Common Tube) for EL84.{{cite web|title=A simple CV Register cross reference|url=http://www.nzvrs.pl.net/aaa/cv_register.htm|access-date=23 May 2014}}
Other equivalent tubes are the 7189 and 7189A,{{cite web|title=7189A|url=http://www.radiomuseum.org/tubes/tube_7189a.html|access-date=25 May 2014}}{{cite web|title=7189 & 7189A Datasheets from Sylvania|url=http://frank.pocnet.net/sheets/106/7/7189.pdf|access-date=25 May 2014}} an extended-ratings version of the tube for industrial applications, the E84L (7320), a long-life, professional version with more than 10000 hours expected lifetime, and the directly equivalent 6P14P (Cyrillic: 6П14П) produced in the USSR by the Reflektor plant. {{As of|2012}} a slightly modified version of the 6P14P was manufactured in Russia for Sovtek. An extended-ratings version of the 6P14P is also available, the 6P14P-EV (Cyrillic: 6П14П-ЕВ), and it is known among US guitar players as EL84M or the Russian military EL84. While not necessarily a true military version of the tube (in fact it is more comparable to the 7189), 6P14P-EVs are known for their low noise and durability. Large new-old-stock supplies of the tube are available.
The 6GK6 has nearly equivalent operating characteristics with a different pinout.
{{As of|2022}} the tube was manufactured in Russia (Sovtek, Electro-Harmonix, Tung-Sol, Mullard and Genalex Gold Lion brands), Slovakia- Čadca (JJ Electronic) and China (Psvane brandClassic Series EL84,{{cite web |url=http://www.psvane.com/hifixl/691.html |title = Changsha Hengyang Electronics Co., Ltd.}} made by Hengyang ElectronicsAbout us, {{cite web |url=http://www.psvane.com/en/aboutus.html |title = Changsha Hengyang Electronics Co., Ltd.}}). The Sovtek EL84 is often sold under their own brand name by other well-known electric guitar and guitar amplifier manufacturers{{dash}}such as Fender or Mesa Boogie.
Also see 6P1P.
Characteristics
Specifications given for the EL84, PL84, and UL84 are from Philips; RCA and Sylvania list slightly higher voltage ratings for Va and Vkf and lower for Vg2 for the xCW5 series{{dash}}the 6CW5/EL86, 8CW5/XL86, 10CW5/LL86, 15CW5/PL84, and 30CW5/HL84.{{cite book|title=Philips Data Handbook{{dash}}Electron Tubes Part 4|date=1967|publisher=Philips}}{{cite web|title=EL86 @ The National Valve Museum|url=http://www.r-type.org/exhib/aad0122.htm|access-date=22 May 2014}}
| class="wikitable" | |||||||
| Characteristic | EL84/6BQ5, N709 | 8BQ5/XL84 | 10BQ5/LL84 | EL86/6CW5 | 10CW5/LL86 | PL84/15CW5 | UL84/45B5 |
|---|---|---|---|---|---|---|---|
| Basing Diagram
|colspan="7"| 9CV (pin 1: ic; pin 2: g1; pin 3: k+g3; pin 4: h; pin 5: h; pin 6: ic; pin 7: anode; pin 8: ic; pin 9: g2) where ic = internal connection | |||||||
| Heater | 6.3 V, 760 mA | 8.0 V, 600 mA or 8.5 V, 600 mA{{cite web|title=XL84|url=http://www.radiomuseum.org/tubes/tube_xl84.html|access-date=23 May 2014}} | 10.6 V, 450 mA (Sylvania) 10.5 V, 450 mA (RCA) | 6.3 V, 760 mA | 10.6 V, 450 mA | 15 V, 300 mA | 45 V, 100 mA |
| Maximum Voltage Ratings
|colspan="3"| {{nowrap|300 Va}} {{nowrap|300 Vg2}} |colspan="3"| {{nowrap|250 Va}} (Philips) or {{nowrap|275 Va}} (RCA, Sylvania) | {{nowrap|250 Va}} {{nowrap|200 Vg2}} {{nowrap|200 Vkf}} | ||||||
| Maximum Power Ratings
|colspan="3"| {{nowrap|12 Wa}} |colspan="4"| {{nowrap|12 Wa}} (Philips) or {{nowrap|14 Wa}} (RCA) | |||||||
| Maximum Cathode Current, Ik
|colspan="3"| {{nowrap|65 mA}} |colspan="4"| {{nowrap|100 mA}} | |||||||
| Transconductance
|colspan="3"| {{nowrap|11.3 mA/V}} |colspan="4"| {{nowrap|11.0 mA/V}} | |||||||
| Internal (plate) resistance, Ri
|colspan="3"| {{nowrap|38 kΩ}} |colspan="4"| {{nowrap|26 kΩ}} | |||||||
| Test Conditions
|colspan="3"| {{nowrap|250 Va}} |colspan="4"| {{nowrap|170 Va}} | |||||||
| 12.5 Vg1}} | |||||||
| Maximum Output Power (single-ended Class A) |colspan="3"| 5.7 W |colspan="4"| 5.3 W | |||||||
| Maximum Output Power (2 tubes, push-pull Class AB) |colspan="3"| 17 W |colspan="3"| 17.5 W | 14.3 W @3.8% THD into {{nowrap|1.5 +}} {{nowrap|1.5 kΩ}}, 200 V supply, 14.3 VRMS input |
References
{{reflist}}
External links
- [http://tdsl.duncanamps.com/show.php?des=EL84 EL84 data at TDSL]
- [http://tubedata.milbert.com/sheetsE3.html Vacuum tube datasheet archive]
- [https://tubemaze.info/tag/6bq5-el84/ Reviews of EL84/6bq5 tubes]