Heliodisplay

The Heliodisplay is an air-based display which uses primarily water condensed from air that is already present in the operating environment. The system, developed by IO2 Technology in 2001, uses a projection unit focused onto multiple layers of air and micron-sized atomized particles in mid-air, resulting in a two-dimensional display with no visible projection surface. This is similar in principle to the cinematic technique of rear projection. As dark areas of the image may appear invisible, the image may be more realistic than on a projection screen, although it is not volumetric. The system may be viewed from both front and back when combined with two light sources, but an oblique viewing angle of ±30 degrees may be required for various configurations due to the rear-projection requirement.

The Heliodisplay can operate as a free-space touchscreen, with the "i" models containing an embedded processor to detect touches without the IR laser grid previous models required. Beginning with the original 2001 prototype, the Heliodisplay could be used as a pointing device if the supplied software was installed. Smaller{{which|date=May 2025}} Heliodisplay models weigh {{convert|4|kg}} and are about the size of a lunchbox (30 × 30 × 12 cm) similar to the 2002 version. Larger systems capable of image diagonals up to {{convert|2.3|m|in}} also have the same footprint.{{Cite web |url=http://www.io2technology.com/images/heliodisplay-brochure.pdf |title=Archived copy |access-date=2014-03-12 |archive-url=https://web.archive.org/web/20150130202421/http://www.io2technology.com/images/heliodisplay-brochure.pdf |archive-date=2015-01-30 |url-status=dead }}

The air-based system is formed by a series of metal plates, and the original Heliodisplay could run for several hours, although newer models can operate continuously.David Bernstein. [https://query.nytimes.com/gst/fullpage.html?res=9D00E1DC163FF93BA25751C1A9659C8B63 Making Something Out of Nothing.] December 18, 2003. The 2008 models of Heliodisplays use 80 ml to 120 ml of water per hour (most used for cooling), depending on screen size and user settings, although the medium is primarily air. The Heliodisplay works predominantly by drawing in the surrounding air (such as in museum environments) where there is negligible affect to the surrounding space.

The Heliodisplay was invented by Chad Dyner, who built it as a five-inch interactive prototype in 2000–2001 before patenting the free-space display technology. The original system used a CMOS camera and IR laser to track the position of a finger in mid-air and update the projected image to enabling the first co-located display with mid-air control interface. IO2 Technology commercialized the original versions and made improvements over the years in developing the product line. The Heliodisplay is sold directly worldwide by IO2 Technology, which has offices in the Bay Area of Northern California.

Models

=M1=

The original M1 units produced by IO2 were advanced prototypes and proof-of-concept. These are the first Heliodisplay developed by the IO2 Technology. They have all the above said properties. But they have less fidelity than the future systems although adopted various ion-discharge plates {{Cite web |url=http://www.io2technology.com/images/Heliodisplay-15helio |title=IO2 Technology / Holographic Systems and Solutions |access-date=2014-03-12 |archive-url=https://web.archive.org/web/20160808162058/http://www.io2technology.com/images/Heliodisplay-15helio |archive-date=2016-08-08 |url-status=dead }} and showcased in 2003.{{Cite web |url=http://www.io2technology.com/images/Helio-2003-demo |title=IO2 Technology / Holographic Systems and Solutions |access-date=2014-03-12 |archive-url=https://web.archive.org/web/20160808161925/http://www.io2technology.com/images/Helio-2003-demo |archive-date=2016-08-08 |url-status=dead }} This first generation Heliodisplay supported only a 22” image and utilized an IR light source and an IR camera to track the position of a finger for cursor controlling the images.

=M2=

The second-generation M2 Heliodisplay supports a 30" image with 16.7 million colours and a 2000:1 contrast ratio. The interactive M2i version includes virtual touchscreen capability.

=M3 and M30=

The new third-generation M3 version launched on February 28, 2007 [https://www.engadget.com/2007/02/28/io2-technology-intros-floating-m3-heliodisplay-screen/ IO2 Technology intros floating M3 Heliodisplay screen] has the same basic specifications as the M2 but is said to be much quieter, with improved brightness and clarity and more stable operation with an improved tri-flow system.

Apart from displaying at a standard ratio of 4:3 it also displays 16:9 widescreen ratio. There is also an interactive version called the M3i.{{Cite web |url=http://www.io2technology.com/salesinquiry |title=IO2Technology M3 |access-date=2007-03-25 |archive-url=https://web.archive.org/web/20070324053557/http://www.io2technology.com/salesinquiry |archive-date=2007-03-24 |url-status=dead }}

The M30 is the updated version of the M3, which fits into the current model numbering system, 30 designating the diagonal screen size.

=M50 and M100=

In late 2007, IO2 Technology introduced two larger Heliodisplays, the M50 and M100. The M50 has a 50" diagonal image, equivalent to displaying a life-size head-and-shoulders person. The M100 has a 100" diagonal image, equivalent to displaying a large full-body person (about 2 meters tall).

File:Heliodisplay Piezo.jpg used to vaporize water for a Heliodisplay.]]

=S and L and XL=

In 2011 IO2 reintroduced the smaller format Heliodisplays along with the standard L(large) models that project approximately 2 meter tall image (for lifesize person projections). The L models can be placed on the floor as a standing tower and take up slightly more area that a sheet of paper (14 inches in diameter) and weigh in around 70 lbs (35 kg) allowing it to be moved around by one person. Power consumption for the base tower 2 meter version is as energy efficient as the legacy models and consumes around 300 watts. The system is based on improvements to the M100, and similarly, the s (small) models over the legacy versions of the m30 both in image and user interface. The XL model is a separate system that supports larger format images beyond the 2 meter range. All units from 2009 have a simple interface with a single on/off button and power cord.

=i versions=

IO2 incorporated various advances to the existing platforms and most equipment weight was reduced by close to 50%. Current 2.3 meter systems now weigh closer to 38 lb (17.2 kg), along with a 20% reduction in form factor and footprint. Equipment efficiency was improved to over 90%, while still maintaining its relatively quiet operation of around 39 dB (as compared to other fan based technologies). Image recovery time is under 1.0 seconds in some models, along with wireless communication to limit the cables to only the power cord. Overall image fidelity and stability was further improved.

References

External links

[https://web.archive.org/web/20061110180913/http://www.io2technology.com/ The IO2 website]
[http://www.ohgizmo.com/2005/08/17/interactive-3d-display-its-here "Interactive 3D Display: It's here!"] article from OhGizmo.com
[http://www.cbc.ca/news/background/tech/sci-fi-projections.html Sci-fi projections] Article from CBC, March 22, 2007
{{cite magazine |url = https://www.wired.com/science/discoveries/multimedia/2003/09/60410 |title = Wired Report: Look Ma, No Projection Screen |magazine = Wired |language = |accessdate = 2007-03-25 |year = 2007 }}

= Media =

== Early footage (~2002) ==

[http://www.idemployee.id.tue.nl/g.w.m.rauterberg/Movies/helio-1.avi Display of a wristwatch] {{Webarchive|url=https://web.archive.org/web/20110724171321/http://www.idemployee.id.tue.nl/g.w.m.rauterberg/Movies/helio-1.avi |date=2011-07-24 }}
[http://www.idemployee.id.tue.nl/g.w.m.rauterberg/Movies/helio-2.avi A famous clip showing the Heliodisplay's interactive navigation using a map display] {{Webarchive|url=https://web.archive.org/web/20060420072724/http://www.idemployee.id.tue.nl/g.w.m.rauterberg/Movies/helio-2.avi |date=2006-04-20 }}
[http://www.idemployee.id.tue.nl/g.w.m.rauterberg/Movies/helio-3.avi Display of a car's exterior] {{Webarchive|url=https://web.archive.org/web/20060420072750/http://www.idemployee.id.tue.nl/g.w.m.rauterberg/Movies/helio-3.avi |date=2006-04-20 }}

== More recent footage ==

[https://web.archive.org/web/20070928141039/http://www.io2technology.com/video IO2 Technology video page]
[https://www.youtube.com/devicefan IO2 Technology's YouTube page]

Category:Multimodal interaction

Category:Display technology companies

Category:Computer peripherals