Hemipolyhedron#Duals of the hemipolyhedra

{{Short description|Uniform star polyhedron whose faces intersect its center}}

{{More citations needed|date=May 2021}}

In geometry, a hemipolyhedron is a uniform star polyhedron some of whose faces pass through its center. These "hemi" faces lie parallel to the faces of some other symmetrical polyhedron, and their count is half the number of faces of that other polyhedron – hence the "hemi" prefix.

The prefix "hemi" is also used to refer to certain projective polyhedra, such as the hemi-cube, which are the image of a 2 to 1 map of a spherical polyhedron with central symmetry.

Wythoff symbol and vertex figure

Their Wythoff symbols are of the form p/(p − q) p/q | r; their vertex figures are crossed quadrilaterals. They are thus related to the cantellated polyhedra, which have similar Wythoff symbols. The vertex configuration is p/q.2r.p/(p − q).2r. The 2r-gon faces pass through the center of the model: if represented as faces of spherical polyhedra, they cover an entire hemisphere and their edges and vertices lie along a great circle. The p/(p − q) notation implies a {p/q} face turning backwards around the vertex figure.

The nine forms, listed with their Wythoff symbols and vertex configurations are:

class=wikitable width=500

|100px
Tetrahemihexahedron
3/2 3 {{pipe}} 2
(3.4.3/2.4)
(p/q = 3, r = 2)

|100px
Octahemioctahedron
3/2 3 {{pipe}} 3
(3.6.3/2.6)
(p/q = 3, r = 3)

|100px
Small icosihemidodecahedron
3/2 3 {{pipe}} 5
(3.10.3/2.10)
(p/q = 3, r = 5)

|100px
Great icosihemidodecahedron
3/2 3 {{pipe}} 5/3
(3.10/3.3/2.10/3)
(p/q = 3, r = 5/3)

|100px
Small dodecahemicosahedron
5/3 5/2 {{pipe}} 3
(5/2.6.5/3.6)
(p/q = 5/2, r = 3)

 

|100px
Cubohemioctahedron
4/3 4 {{pipe}} 3
(4.6.4/3.6)
(p/q = 4, r = 3)

|100px
Small dodecahemidodecahedron
5/4 5 {{pipe}} 5
(5.10.5/4.10)
(p/q = 5, r = 5)

|100px
Great dodecahemidodecahedron
5/3 5/2 {{pipe}} 5/3
(5/2.10/3.5/3.10/3)
(p/q = 5/2, r = 5/3)

|100px
Great dodecahemicosahedron
5/4 5 {{pipe}} 3
(5.6.5/4.6)
(p/q = 5, r = 3)

Note that Wythoff's kaleidoscopic construction generates the nonorientable hemipolyhedra (all except the octahemioctahedron) as double covers (two coincident hemipolyhedra).

In the Euclidean plane, the sequence of hemipolyhedra continues with the following four star tilings, where apeirogons appear as the aforementioned equatorial polygons:{{cn|date=

October 2019|reason=claims are not obvious}}

class="wikitable sortable"
Original
rectified
tiling
Edge
diagram
SolidVertex
Config
WythoffSymmetry
align=center

|100px
Square
tiling

100px150px4.∞.4/3.∞
4.∞.-4.∞
4/3 4 {{pipe}} ∞p4m
align=center

|100px
Triangular
tiling

100px150px(3.∞.3.∞.3.∞)/23/2 {{pipe}} 3 ∞rowspan=3|p6m
align=center

|rowspan=2|100px
Trihexagonal
tiling

|rowspan=2|100px

150px6.∞.6/5.∞
6.∞.-6.∞
6/5 6 {{pipe}} ∞
align=center

|150px

∞.3.∞.3/2
∞.3.∞.-3
3/2 3 {{pipe}} ∞

Of these four tilings, only 6/5 6 {{pipe}} ∞ is generated as a double cover by Wythoff's construction.

Orientability

Only the octahemioctahedron represents an orientable surface; the remaining hemipolyhedra have non-orientable or single-sided surfaces. This is because proceeding around an equatorial 2r-gon, the p/q-gonal faces alternately point "up" and "down", so any two consecutive ones have opposite senses. This is equivalent to demanding that the p/q-gons in the corresponding quasiregular polyhedra below can be alternatively given positive and negative orientations. But that is only possible for the triangles of the cuboctahedron (corresponding to the triangles of the octahedron, the only regular polyhedron with an even number of faces meeting at a vertex), which are precisely the non-hemi faces of the octahemioctahedron.Coxeter et al., p. 417

Duals of the hemipolyhedra

Since the hemipolyhedra have faces passing through the center, the dual figures have corresponding vertices at infinity; properly, on the real projective plane at infinity.{{Harv|Wenninger|1983|loc = [https://books.google.com/books?id=mfmzUjhs-_8C&pg=PA101 p. 101]}} In Magnus Wenninger's Dual Models, they are represented with intersecting prisms, each extending in both directions to the same vertex at infinity, in order to maintain symmetry. In practice the model prisms are cut off at a certain point that is convenient for the maker. Wenninger suggested these figures are members of a new class of stellation figures, called stellation to infinity. However, he also suggested that strictly speaking they are not polyhedra because their construction does not conform to the usual definitions.

There are 9 such duals, sharing only 5 distinct outward forms, four of them existing in outwardly identical pairs. The members of a given visually identical pair differ in their arrangements of true and false vertices (a false vertex is where two edges cross each other but do not join). The outward forms are:

class=wikitable width=600

|120px

|120px

|120px

|120px

|120px

Tetrahemihexacron

|Octahemioctacron
and hexahemioctacron

|Small icosihemidodecacron
and small dodecahemidodecacron

|Great dodecahemidodecacron
and great icosihemidodecacron

|Great dodecahemicosacron
and small dodecahemicosacron

3 intersecting infinite square prisms

|4 intersecting infinite hexagonal prisms

|6 intersecting infinite decagonal prisms

|6 intersecting infinite decagrammic prisms

|10 intersecting infinite hexagonal prisms

Relationship with the quasiregular polyhedra

The hemipolyhedra occur in pairs as facetings of the quasiregular polyhedra with four faces at a vertex. These quasiregular polyhedra have vertex configuration m.n.m.n and their edges, in addition to forming the m- and n-gonal faces, also form hemi-faces of the hemipolyhedra. Thus, the hemipolyhedra can be derived from the quasiregular polyhedra by discarding either the m-gons or n-gons (to maintain two faces at an edge) and then inserting the hemi faces. Since either m-gons or n-gons may be discarded, either of two hemipolyhedra may be derived from each quasiregular polyhedron, except for the octahedron as a tetratetrahedron, where m = n = 3 and the two facetings are congruent. (This construction does not work for the quasiregular polyhedra with six faces at a vertex, also known as the ditrigonal polyhedra, as their edges do not form any regular hemi-faces.)

Since the hemipolyhedra, like the quasiregular polyhedra, also have two types of faces alternating around each vertex, they are sometimes also considered to be quasiregular.{{cite encyclopedia |url=http://georgehart.com/virtual-polyhedra/quasi-regular-info.html |title=Quasiregular Polyhedra |author=Hart, George |date=1996 |encyclopedia=Virtual Polyhedra: The Encyclopedia of Polyhedra |access-date=6 May 2012}}

class="wikitable"
Quasiregular polyhedron
m.n.m.n
Hemi-faces (h-gons)Hemipolyhedron with m-gons discarded
n.h.n/n - 1.h
Hemipolyhedron with n-gons discarded
m.h.m/m - 1.h
100px
Tetratetrahedron
3.3.3.3
m = 3, n = 3
100px
squares
{4}
 
100px
Tetrahemihexahedron
3.4.3/2.4
 
100px
Tetrahemihexahedron
3.4.3/2.4
 
100px
Cuboctahedron
3.4.3.4
m = 3, n = 4
100px
hexagons
{6}
 
100px
Cubohemioctahedron
4.6.4/3.6
 
100px
Octahemioctahedron
3.6.3/2.6
 
100px
Icosidodecahedron
3.5.3.5
m = 3, n = 5
100px
decagons
{10}
 
100px
Small dodecahemidodecahedron
5.10.5/4.10
 
100px
Small icosihemidodecahedron
3.10.3/2.10
 
100px
Dodecadodecahedron
5.5/2.5.5/2
m = 5, n = 5/2
100px
hexagons
{6}
 
100px
Small dodecahemicosahedron
5/2.6.5/3.6
 
100px
Great dodecahemicosahedron
5.6.5/4.6
 
100px
Great icosidodecahedron
3.5/2.3.5/2
m = 3, n = 5/2
100px
decagrams
{10/3}
 
100px
Great dodecahemidodecahedron
5/2.10/3.5/3.10/3
 
100px
Great icosihemidodecahedron
3.10/3.3/2.10/3
 

Here m and n correspond to p/q above, and h corresponds to 2r above.

References

{{Reflist}}

  • {{Citation | doi=10.1098/rsta.1954.0003 | last1=Coxeter | first1=Harold Scott MacDonald | author1-link=Harold Scott MacDonald Coxeter | last2=Longuet-Higgins | first2=M. S. | last3=Miller | first3=J. C. P. | title=Uniform polyhedra | jstor=91532 | mr=0062446 | year=1954 | journal=Philosophical Transactions of the Royal Society of London. Series A. Mathematical and Physical Sciences | issn=0080-4614 | volume=246 | pages=401–450 | issue=916 | publisher=The Royal Society| bibcode=1954RSPTA.246..401C }}
  • {{Citation | last1=Wenninger | first1=Magnus | author1-link=Magnus Wenninger | title=Polyhedron Models | publisher=Cambridge University Press | isbn=978-0-521-09859-5 | mr=0467493 | year=1974}} (Wenninger models: 67, 68, 78, 89, 91, 100, 102, 106, 107)
  • {{Citation | last1=Wenninger | first1=Magnus | author1-link=Magnus Wenninger | title=Dual Models | publisher=Cambridge University Press | isbn=978-0-521-54325-5 | mr=730208 | year=1983}}
  • Har'El, Z. [https://www.math.technion.ac.il/~rl/docs/uniform.pdf Uniform Solution for Uniform Polyhedra.], Geometriae Dedicata 47, 57-110, 1993. [https://www.math.technion.ac.il/~rl Zvi Har’El] (Page 10, 5.2. Hemi polyhedra p p'|r.)