Intel 8080#INTERP

Microprocessor customers were reluctant to adopt the 8008 because of limitations such as the single addressing mode, low clock speed, low pin count, and small on-chip stack, which restricted the scale and complexity of software. There were several proposed designs for the 8080, ranging from simply adding stack instructions to the 8008 to a complete departure from all previous Intel architectures.{{cite web |last1=Miller |first1=Michael |title=Creating the 8080: The Processor That Started the PC Revolution |url=https://www.pcmag.com/news/creating-the-8080-the-processor-that-started-the-pc-revolution |website=PCMag |publisher=Zaff Davis |access-date=14 November 2021 |archive-date=November 14, 2021 |archive-url=https://web.archive.org/web/20211114174610/https://www.pcmag.com/news/creating-the-8080-the-processor-that-started-the-pc-revolution |url-status=live }} The final design was a compromise between the proposals.

The conception of the 8080 began in the summer of 1971, when Intel wrapped up development of the 4004 and were still working on the 8008. After rumors about the "CPU on a chip" came out, Intel started to see interest in the microprocessor from all sorts of customers. At the same time, Federico Faggin – who led the design of the 4004 and became the primary architect of the 8080 – was giving some technical seminars on both of the aforementioned microprocessors and visiting customers. He found that they were complaining about the architecture and performance of said microprocessors, especially the 8008 – as its speed at 0.5 MHz was "not adequate."

Faggin later proposed the chip to Intel's management and pushed for its implementation in the spring of 1972, as development of the 8008 was wrapping up. However, much to his surprise and frustration, Intel didn't approve the project. Faggin says that Intel wanted to see how the market would react to the 4004 and 8008 first, while others noted the problems Intel was having getting its latest generation of memory chips out the door and wanted to focus on that. As a result, Intel didn't approve of the project until fall of that year. Faggin hired Masatoshi Shima, who helped design the logic of the 4004 with him, from Japan in November 1972. Shima did the detailed design under Faggin's direction,{{cite web |last1=Faggin |first1=Federico |title=8008 and 8080 Q&A |url=https://sites.google.com/site/microprocessorintel4004/8008-8080-q-a |website=Microprocessor Intel 4004 |access-date=15 November 2021 |archive-date=November 15, 2021 |archive-url=https://web.archive.org/web/20211115233233/https://sites.google.com/site/microprocessorintel4004/8008-8080-q-a |url-status=live }} using the design methodology for random logic with silicon gate that Faggin had created for the 4000 family and the 8008.

The 8080 was explicitly designed to be a general-purpose microprocessor for a larger number of customers. Much of the development effort was spent trying to integrate the functionalities of the 8008's supplemental chips into one package. It was decided early in development that the 8080 was not to be binary-compatible with the 8008, instead opting for source compatibility once run through a transpiler, to allow new software to not be subject to the same restrictions as the 8008. For the same reason, as well as to expand the capabilities of stack-based routines and interrupts, the stack was moved to external memory.

Noting the specialized use of general-purpose registers by programmers in mainframe systems, Faggin with Shima and Stanley Mazor decided the 8080's registers would be specialized, with register pairs having a different set of uses.{{cite journal |last1=Mazor |first1=Stanley |title=Intel 8080 CPU Chip Development |journal=IEEE Annals of the History of Computing |date=April–June 2007 |volume=29 |issue=2 |pages=70–73 |doi=10.1109/MAHC.2007.25|s2cid=14755544 }} This also allowed the engineers to more effectively use transistors for other purposes.

Shima finished the layout in August 1973. Production of the chip later began in December of that year. After the development of NMOS logic fabrication, a prototype of the 8080 was completed in January 1974. It had a flaw, in that driving with standard TTL devices increased the ground voltage because high current flowed into the narrow line. Intel had already produced 40,000 units of the 8080 at the direction of the sales section before Shima characterized the prototype. After working out some typical last-minute issues, Intel introduced the product in March 1974. It was released a month later as requiring Low-power Schottky TTL (LS TTL) devices. The 8080A fixed this flaw.{{Cite journal|last1=Shima|first1=Masatoshi|author-link=Masatoshi Shima|last2=Nishimura|first2=Hirohiko|last3=Ishida|first3=Haruhisa|year=1979|title=座談会 マイクロコンピュータの誕生 開発者 嶋 正利氏に聞く|journal=Bit|language=ja|publisher=共立出版|volume=11|issue=11|pages=4–12|issn=0385-6984}}

{{anchor|INTERP}}Intel offered an instruction set simulator for the 8080 named INTERP/80 to run compiled PL/M programs. It was written in FORTRAN IV by Gary Kildall while he worked as a consultant for Intel.{{cite magazine |title=High-level language simplifies microcomputer programming |author-last=Kildall |author-first=Gary Arlen |author-link=Gary Arlen Kildall |website=Electronics |publisher=McGraw-Hill Education |date=1974-06-27 |pages=103–109 [108] |url=https://www.retrotechnology.com/dri/kildall_highlevel_1974.pdf |access-date=2021-11-14 |url-status=live |archive-url=https://web.archive.org/web/20211114174610/https://www.retrotechnology.com/dri/kildall_highlevel_1974.pdf |archive-date=2021-11-14}}{{cite web |title=8080 Simulator INTERP/80 |series=Microcomputer Software |publisher=Intel Corporation |date=March 1975 |id=Product Code 98-119A. MCS-516-0375/27.5K |url=https://mark-ogden.uk/files/intel/publications/98-119A%208080%20Simulator%20Interp_80-Mar75.pdf |access-date=2023-11-25 |url-status=live |archive-url=https://web.archive.org/web/20231125172836/https://mark-ogden.uk/files/intel/publications/98-119A%208080%20Simulator%20Interp_80-Mar75.pdf |archive-date=2023-11-25}} (2 pages)

There is only one patent on the 8080 with the following names: Federico Faggin, Masatoshi Shima, Stanley Mazor.

File:Intel 8080 arch.svg

The Intel 8080 is the successor to the 8008. It uses the same basic instruction set and register model as the 8008, although it is neither source code compatible nor binary code compatible with its predecessor. Every instruction in the 8008 has an equivalent instruction in the 8080. The 8080 also adds 16-bit operations in its instruction set. Whereas the 8008 required the use of the HL register pair to indirectly access its 14-bit memory space, the 8080 added addressing modes to allow direct access to its full 16-bit memory space. The internal 7-level push-down call stack of the 8008 was replaced by a dedicated 16-bit stack-pointer (SP) register. The 8080's 40-pin DIP packaging permits it to provide a 16-bit address bus and an 8-bit data bus, enabling access to 64 KiB (2¹⁶ bytes) of memory.

The processor has seven 8-bit registers (A, B, C, D, E, H, and L), where A is the primary 8-bit accumulator. The other six registers can be used as either individual 8-bit registers or in three 16-bit register pairs (BC, DE, and HL, referred to as B, D and H in Intel documents) depending on the particular instruction. Some instructions also enable the HL register pair to be used as a (limited) 16-bit accumulator. A pseudo-register M, which refers to the dereferenced memory location pointed to by HL, can be used almost anywhere other registers can be used. The 8080 has a 16-bit stack pointer to memory, replacing the 8008's internal stack, and a 16-bit program counter.

The processor maintains internal flag bits (a status register), which indicate the results of arithmetic and logical instructions. Only certain instructions affect the flags. The flags are:

• Sign (S), set if the result is negative.
• Zero (Z), set if the result is zero.
• Parity (P), set if the number of 1 bits in the result is even.
• Carry (C), set if the last addition operation resulted in a carry or if the last subtraction operation required a borrow.
• Auxiliary carry (AC or H), used for binary-coded decimal arithmetic (BCD).

The carry bit can be set or complemented by specific instructions. Conditional-branch instructions test the various flag status bits. The accumulator and the flags together are called the PSW, or program status word. PSW can be pushed to or popped from the stack.

As with many other 8-bit processors, all instructions are encoded in one byte (including register numbers, but excluding immediate data), for simplicity. Some can be followed by one or two bytes of data, which can be an immediate operand, a memory address, or a port number. Like more advanced processors, it has automatic CALL and RET instructions for multi-level procedure calls and returns (which can even be conditionally executed, like jumps) and instructions to save and restore any 16-bit register pair on the machine stack. Eight one-byte call instructions ({{code|RST}}) for subroutines exist at the fixed addresses 00h, 08h, 10h, ..., 38h. These are intended to be supplied by external hardware in order to invoke a corresponding interrupt service routine, but are also often employed as fast system calls. The instruction that executes slowest is {{code|XTHL}}, which is used for exchanging the register pair HL with the value stored at the address indicated by the stack pointer.

All 8-bit operations with two operands can only be performed on the 8-bit accumulator (the A register). The other operand can be either an immediate value, another 8-bit register, or a memory byte addressed by the 16-bit register pair HL. Increments and decrements can be performed on any 8 bit register or an HL-addressed memory byte. Direct copying is supported between any two 8-bit registers and between any 8-bit register and an HL-addressed memory byte. Due to the regular encoding of the {{code|MOV}} instruction (using a quarter of available opcode space), there are redundant codes to copy a register into itself ({{code|MOV B,B}}, for instance), which are of little use, except for delays. However, the systematic opcode for {{code|MOV M,M}} is instead used to encode the halt (HLT (x86 instruction)) instruction, halting execution until an external reset or interrupt occurs.

Although the 8080 is generally an 8-bit processor, it has limited abilities to perform 16-bit operations. Any of the three 16-bit register pairs (BC, DE, or HL, referred to as B, D, H in Intel documents) or SP can be loaded with an immediate 16-bit value (using {{code|LXI}}), incremented or decremented (using {{code|INX}} and {{code|DCX}}), or added to HL (using {{code|DAD}}). By adding HL to itself, it is possible to achieve the same result as a 16-bit arithmetical left shift with one instruction. The only 16-bit instructions that affect any flag is {{code|DAD}}, which sets the CY (carry) flag in order to allow for programmed 24-bit or 32-bit arithmetic (or larger), needed to implement floating-point arithmetic. BC, DE, HL, or PSW can be copied to and from the stack using {{code|PUSH}} and {{code|POP}}. A stack frame can be allocated using {{code|DAD SP}} and {{code|SPHL}}. A branch to a computed pointer can be executed with {{code|PCHL}}. {{code|LHLD}} loads HL from directly addressed memory and {{code|SHLD}} stores HL likewise. The {{code|XCHG}}[http://www.classiccmp.org/dunfield/r/8080.txt 8080 instruction encoding] {{Webarchive|url=https://web.archive.org/web/20180305170555/http://www.classiccmp.org/dunfield/r/8080.txt |date=March 5, 2018 }}. ClassicCMP.org. Retrieved on October 23, 2011. instruction exchanges the values of the HL and DE register pairs. {{code|XTHL}}exchanges last item pushed on stack with HL. None of these 16-bit operations were supported on the earlier Intel 8008.

The 8080 supports 256 input/output (I/O) ports,Note: Some Intel datasheets from the 1970s advertise 512 I/O ports, because they count input and output ports separately. accessed via dedicated I/O instructions taking port addresses as operands.{{cite book |title=Computer Architecture and Organization |last1=HAYES

|first1=JOHN P. |isbn=0-07-027363-4 |year=1978 |publisher= McGraw-Hill|pages=420–423 }} This I/O mapping scheme is regarded as an advantage, as it frees up the processor's limited address space. Many CPU architectures instead use so-called memory-mapped I/O (MMIO), in which a common address space is used for both RAM and peripheral chips. This removes the need for dedicated I/O instructions, although a drawback in such designs may be that special hardware must be used to insert wait states, as peripherals are often slower than memory. However, in some simple 8080 computers, I/O is indeed addressed as if they were memory cells, "memory-mapped", leaving the I/O commands unused. I/O addressing can also sometimes employ the fact that the processor outputs the same 8-bit port address to both the lower and the higher address byte (i.e., {{code|IN 05h}} would put the address 0505h on the 16-bit address bus). Similar I/O-port schemes are used in the backward-compatible Zilog Z80 and Intel 8085, and the closely related x86 microprocessor families.

One of the bits in the processor state word (see below) indicates that the processor is accessing data from the stack. Using this signal, it is possible to implement a separate stack memory space. This feature is seldom used.

For more advanced systems, during the beginning of each machine cycle, the processor places an eight bit status word on the data bus. This byte contains flags that determine whether the memory or I/O port is accessed and whether it is necessary to handle an interrupt.

The interrupt system state (enabled or disabled) is also output on a separate pin. For simple systems, where the interrupts are not used, it is possible to find cases where this pin is used as an additional single-bit output port (the popular Radio-86RK computer made in the Soviet Union, for instance).

The following 8080/8085 assembler source code is for a subroutine named {{code|memcpy}} that copies a block of data bytes of a given size from one location to another. The data block is copied one byte at a time, and the data movement and looping logic utilizes 16-bit operations.

1000
1000
1000  78
1001  B1
1002  C8
1003  1A
1004  77
1005  13
1006  23
1007  0B
1008  78
1009  B1
100A  C2 03 10
100D  C9

File:Intel 8080 Microprocessor.png]]

The address bus has its own 16 pins, and the data bus has 8 pins that are usable without any multiplexing. Using the two additional pins (read and write signals), it is possible to assemble simple microprocessor devices very easily. Only the separate IO space, interrupts, and DMA need added chips to decode the processor pin signals. However, the pin load capacity is limited; even simple computers often require bus amplifiers.

The processor needs three power sources (−5, +5, and +12 V) and two non-overlapping high-amplitude synchronizing signals. However, at least the late Soviet version КР580ВМ80А was able to work with a single +5 V power source, the +12 V pin being connected to +5 V and the −5 V pin to ground.

The pin-out table, from the chip's accompanying documentation, describes the pins as follows:

A key factor in the success of the 8080 was the broad range of support chips available, providing serial communications, counter/timing, input/output, direct memory access, and programmable interrupt control amongst other functions:

• 8214 - Priority Interrupt Control Unit[http://www.bitsavers.org/components/intel/MCS80/98-153B_Intel_8080_Microcomputer_Systems_Users_Manual_197509.pdf Intel Corporation, "8214 Priorty Interrupt Control Unit", Intel 8080 Microcomputer Systems User's Manual, September 1975, page 5-153] {{Webarchive|url=https://web.archive.org/web/20240528085204/http://bitsavers.org/components/intel/MCS80/98-153B_Intel_8080_Microcomputer_Systems_Users_Manual_197509.pdf |date=May 28, 2024 }} from bitsaver.org in PDF
• 8224 – Clock generator
• 8228/8238 – System controller and bus driver
• 8251 – Communication controller
• 8253 – Programmable interval timer
• 8255 – Programmable peripheral interface
• 8257 – DMA controller
• 8259 – Programmable interrupt controller

The 8080 integrated circuit has an NMOS design, which employed non‑saturated enhancement mode transistors as loads,similar to pull-up resistors{{cite book |last=Tohya |first=Hirokazu |url=https://books.google.com/books?id=ILceDgAAQBAJ&q=8080+non-saturated+enhancement&pg=PA4 |title=Switching Mode Circuit Analysis and Design: Innovative Methodology by Novel Solitary Electromagnetic Wave Theory |date=2013 |publisher=Bentham Science Publishers |isbn=9781608054497 |page=4 |language=en |access-date=November 28, 2020 |archive-url=https://web.archive.org/web/20211115163542/https://books.google.com/books?id=ILceDgAAQBAJ&q=8080+non-saturated+enhancement&pg=PA4 |archive-date=November 15, 2021 |url-status=live}} which demanded supplementary voltage levels (+12 V and −5 V) alongside the standard TTL compatible +5 V.

It was manufactured in a silicon gate process using a minimal feature size of 6 μm. A single layer of metal is used to interconnect the approximately 4,500 transistors{{cite web |title=Intel Chips timeline |url=https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/history-intel-chips-timeline-poster.pdf |website=Intel |publisher=Intel Corporation |access-date=14 November 2021 |archive-date=November 14, 2021 |archive-url=https://web.archive.org/web/20211114170816/https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/history-intel-chips-timeline-poster.pdf |url-status=live }} in the design, but the higher resistance polysilicon layer, which required higher voltage for some interconnects, is implemented with transistor gates. The die size is approximately 20 mm².

{{anchor|8080 CPU family}}

The 8080 was used in many early microcomputers, such as the MITS Altair 8800 Computer, Processor Technology SOL-20 Terminal Computer and IMSAI 8080 Microcomputer, forming the basis for machines running the CP/M operating system (the later, almost fully compatible and more able, Zilog Z80 processor would capitalize on this, with Z80 and CP/M becoming the dominant CPU and OS combination of the period {{circa|1976}} to 1983 much as did the x86 and DOS for the PC a decade later).

In 1979, even after the introduction of the Z80 and 8085 processors, five manufacturers of the 8080 were selling an estimated 500,000 units per month at a price around $3 to $4 each.{{cite news |last=Libes |first=Sol |title=Byte News |periodical=Byte |issn=0360-5280 |volume=4 |series=11 |date=November 1979 |page=82}}

The first single-board microcomputers, such as MYCRO-1 and the dyna-micro / MMD-1 (see: Single-board computer) were based on the Intel 8080. One of the early uses of the 8080 was made in the late 1970s by Cubic-Western Data of San Diego, California, in its Automated Fare Collection Systems custom designed for mass transit systems around the world. An early industrial use of the 8080 is as the "brain" of the DatagraphiX Auto-COM (Computer Output Microfiche) line of products which takes large amounts of user data from reel-to-reel tape and images it onto microfiche. The Auto-COM instruments also include an entire automated film cutting, processing, washing, and drying sub-system.

Several early video arcade games were built around the 8080 microprocessor. The first commercially-available arcade video game to incorporate a microprocessor was Gun Fight, Midway Games' 8080-based reimplementation of Taito's discrete-logic Western Gun, which was released in November 1975.{{cite web|title=What was the first arcade game to use a microprocessor instead of discrete logic?|url=https://retrocomputing.stackexchange.com/questions/613/what-was-the-first-arcade-game-to-use-a-microprocessor-instead-of-discrete-logic|access-date=2023-04-11|archive-date=April 11, 2023|archive-url=https://web.archive.org/web/20230411143158/https://retrocomputing.stackexchange.com/questions/613/what-was-the-first-arcade-game-to-use-a-microprocessor-instead-of-discrete-logic|url-status=live}}Steve L. Kent (2001), The ultimate history of video games: from Pong to Pokémon and beyond : the story behind the craze that touched our lives and changed the world, p. 64, Prima, {{ISBN|0-7615-3643-4}}{{cite book |last1=Akagi |first1=Masumi |title=アーケードTVゲームリスト国内•海外編(1971–2005) |trans-title=Arcade TV Game List: Domestic • Overseas Edition (1971–2005) |date=13 October 2006 |publisher=Amusement News Agency |lang=ja |location=Japan |isbn=978-4990251215 |page=124 |url=https://archive.org/details/ArcadeGameList1971-2005/page/n125}}{{cite web|title=Dave Needle and Jerry Lawson - Two Early Independent Video Game Designers|date=July 29, 2013 |url=http://allincolorforaquarter.blogspot.com/2013/07/dave-needle-and-jerry-lawon-two-early.html|access-date=2023-04-11|archive-date=April 11, 2023|archive-url=https://web.archive.org/web/20230411143158/http://allincolorforaquarter.blogspot.com/2013/07/dave-needle-and-jerry-lawon-two-early.html|url-status=live}} (A pinball machine which incorporated a Motorola 6800 processor, The Spirit of '76, had already been released the previous month.{{cite web|url=http://www.ipdb.org/machine.cgi?id=2294|title=Internet Pinball Machine Database: Mirco Games, Inc. 'Spirit of 76'|website=www.ipdb.org|access-date=2023-04-11|archive-date=April 16, 2023|archive-url=https://web.archive.org/web/20230416224750/https://www.ipdb.org/machine.cgi?id=2294|url-status=live}}{{cite web|last1=wayout440|url=https://pinside.com/pinball/forum/topic/mirco-spirit-of-76-for-sale-the-first-solid-state-pin|title=Mirco Spirit of 76 for sale – THE first solid state pin?|website=Pinside.com|access-date=2023-04-11|archive-date=April 11, 2023|archive-url=https://web.archive.org/web/20230411143207/https://pinside.com/pinball/forum/topic/mirco-spirit-of-76-for-sale-the-first-solid-state-pin|url-status=live}}) The 8080 was then used in later Midway arcade video games{{cite web|title=Midway 8080 System Boards|url=https://arcarc.xmission.com/Web%20Archives/Users.Erols.Com-mowerman%20(Aug-24-2003)/midway.htm|access-date=2023-04-11|archive-date=April 11, 2023|archive-url=https://web.archive.org/web/20230411145527/https://arcarc.xmission.com/Web%20Archives/Users.Erols.Com-mowerman%20(Aug-24-2003)/midway.htm|url-status=live}} and in Taito's 1978 Space Invaders, one of the most successful and well-known of all arcade video games.{{cite web |url=http://www.klov.com/game_detail.php?game_id=9662 |title=Space Invaders Videogame by Bally Midway (1978) |publisher=Killer List of Videogames |access-date=April 11, 2023 |archive-date=November 25, 2010 |archive-url=https://web.archive.org/web/20101125042142/http://www.arcade-museum.com/game_detail.php?game_id=9662 |url-status=live }}{{cite web |url=http://www.1up.com/do/feature?cId=3168373 |archive-url=https://web.archive.org/web/20090226064943/http://www.1up.com/do/feature?cId=3168373 |url-status=dead |archive-date=February 26, 2009 |title=Ten Things Everyone Should Know About Space Invaders |website=1UP.com |author=Edwards, Benj|access-date=2023-04-11}}

Zilog introduced the Z80, which has a compatible machine language instruction set and initially used the same assembly language as the 8080, but for legal reasons, Zilog developed a syntactically-different (but code compatible) alternative assembly language for the Z80. At Intel, the 8080 was followed by the compatible and electrically more elegant 8085.

Later, Intel issued the assembly-language compatible (but not binary-compatible) 16-bit 8086 and then the 8/16-bit 8088, which was selected by IBM for its new PC to be launched in 1981. Later NEC made the NEC V20 (an 8088 clone with Intel 80186 instruction set compatibility) which also supports an 8080 emulation mode. This is also supported by NEC's V30 (a similarly enhanced 8086 clone). Thus, the 8080, via its instruction set architecture (ISA), made a lasting impact on computer history.

A number of processors compatible with the Intel 8080A were manufactured in the Eastern Bloc: the KR580VM80A (initially marked as КР580ИК80) in the Soviet Union, the MCY7880[http://www.cpu-world.com/CPUs/8080/Poland-MCY7880.html MCY7880—a Polish-made clone of 8080] {{Webarchive|url=https://web.archive.org/web/20160817083511/http://www.cpu-world.com/CPUs/8080/Poland-MCY7880.html |date=August 17, 2016 }}. CPU World. Retrieved on October 23, 2011. made by Unitra CEMI in Poland, the MHB8080A[http://www.cpu-world.com/info/exUSSR-chips.html Soviet chips and their western analogs] {{Webarchive|url=https://web.archive.org/web/20170209223725/http://www.cpu-world.com/info/exUSSR-chips.html |date=February 9, 2017 }}. CPU-world. Retrieved on October 23, 2011. made by TESLA in Czechoslovakia, the 8080APC made by Tungsram / MEV in Hungary, and the MMN8080 made by Microelectronica Bucharest in Romania.

{{asof|2017}}, the 8080 is still in production at Lansdale Semiconductors.{{cite web |title=Intel – Microprocessor 8080A Family & 828X Series |url=http://lansdale.com/parts_reference.php?manufacturer=Intel&series=Microprocessor+8080A+Family+%26+828X+Series |author= |publisher=Lansdale Semiconductor Inc. |access-date=20 June 2017 |archive-date=October 14, 2015 |archive-url=https://web.archive.org/web/20151014132249/http://www.lansdale.com/parts_reference.php?manufacturer=Intel&series=Microprocessor+8080A+Family+%26+828X+Series |url-status=live }}

File:AMD C8080A.jpg|AMD Am9080

File:Poland MCY7880 1.jpg|CEMI MCY7880 (Poland)

File:580IK80.jpg|Kvazar Kyiv K580IK80 (Ukrainian SSR)

File:Mitsubishi M5L8080AP 1.jpg|Mitsubishi Electric M5L8080

File:NatSem INS8080AJ 1.jpg|National Semiconductor INS8080

File:NEC 8080AF 1.jpg|NEC μPD8080AF

File:OKI MSM8080A 1.jpg|OKI MSM8080

File:Siemens SAB8080A 1.jpg|Siemens SAB8080

File:Signetics MP8080AI 1.jpg|Signetics MP8080

File:KL Tesla MHB8080.jpg|Tesla MHB8080

File:TI TMS8080JL 1.jpg|Texas Instruments TMS8080

File:5G8080.jpg|5G8080 (PR China)

{{OR section|date=August 2017}}

The 8080 also changed how computers were created. When the 8080 was introduced, computer systems were usually created by computer manufacturers such as Digital Equipment Corporation, Hewlett-Packard, or IBM. A manufacturer would produce the whole computer, including processor, terminals, and system software such as compilers and operating system. The 8080 was designed for almost any application except a complete computer system. Hewlett-Packard developed the HP 2640 series of smart terminals around the 8080. The HP 2647 is a terminal which runs the programming language BASIC on the 8080. Microsoft's founding product, Microsoft BASIC, was originally programmed for the 8080.

The 8080 and 8085 gave rise to the 8086, which was designed as a source code compatible, albeit not binary compatible, extension of the 8080.{{cite journal |last1=Morse |first1=Stephen |last2=Ravenel |first2=Bruce |last3=Mazor |first3=Stanley |last4=Pohlman |first4=William |title=Intel Microprocessors: 8008 to 8086 |journal=IEEE Computer |date=October 1980 |volume=13 |issue=10 |pages=42–60 |doi=10.1109/MC.1980.1653375 |s2cid=206445851 |url=https://stevemorse.org/8086history/8086history.pdf |access-date=November 5, 2021 |archive-date=September 14, 2021 |archive-url=https://web.archive.org/web/20210914205011/https://stevemorse.org/8086history/8086history.pdf |url-status=live }} This design, in turn, later spawned the x86 family of chips, which continue to be Intel's primary line of processors. Many of the 8080's core machine instructions and concepts survive in the widespread x86 platform. Examples include the registers named A, B, C, and D and many of the flags used to control conditional jumps. 8080 assembly code can still be directly translated into x86 instructions,{{vague|date=November 2021|reason=Does this mean 8080 instructions can be translated into IA-32 and AMD64-specific instructions?}} since all of its core elements are still present.

• Asteroid 8080 Intel is named as a pun in recognition of the role that Intel and its 8080 played in the PC revolution, which had a significant impact on the field of astronomy.{{cite web |title=(8080) Intel = 1958 QC = 1987 WU2 = 1989 AS5 |url=https://minorplanetcenter.net/db_search/show_object?object_id=8080 |website=Minor Planet Center |publisher=International Astronomical Union |access-date=14 November 2021 |archive-date=September 25, 2019 |archive-url=https://web.archive.org/web/20190925141642/https://minorplanetcenter.net/db_search/show_object?object_id=8080 |url-status=live }}
• Microsoft's published phone number, 425-882-8080, was chosen because much early work was on this chip.
• Many of Intel's main phone numbers also take a similar form: xxx-xxx-8080

• CP/M – operating system
• S-100 bus
• MPT8080
• Intellec 8 Mod 80
• MDS 800

{{reflist}}

• {{cite book|title=8080A/8085 Assembly Language Programming |edition=1st |first1=Lance |last1=Leventhal |publisher= Adam Osborne & Associates |year=1978 |url=https://archive.org/details/8080a8085AssemblyLanguageProgramming/ }}{{dead link|date=November 2021}}; 495 pages
• {{cite book|title=8080/Z80 Assembly Language – Techniques for Improved Programming |edition=1st |first=Alan |last=Miller |publisher=John Wiley & Sons |year=1981 |isbn=978-0471081241 |url=https://archive.org/details/8080_and_Z-80_Assembly_Language_Techniques_1981_John_Wiley_and_Sons/ }}; 332 pages
• {{cite book|title=Microprocessor Interfacing Techniques |edition=3rd |first1=Rodnay |last1=Zaks |first2=Austin |last2=Lesea |publisher=Sybex |year=1979 |isbn=978-0-89588-029-1|url=https://archive.org/details/MicroprocessorInterfacingTechniques_3rd_ed/ }}; 466 pages
• {{cite book| title=Z80 and 8080 Assembly Language Programming |edition=1st |first1=Kathe |last1=Spracklen|publisher=Hayden |year=1979 |isbn=978-0810451674 |url=https://archive.org/details/z808080assemblyl00kath/ }}; 180 pages

• [http://www.cpu-collection.de/?tn=0&l0=cl&l1=8080 Intel and other manufacturers' 8080 CPU images and descriptions at cpu-collection.de] {{Webarchive|url=https://web.archive.org/web/20061011123653/http://www.cpu-collection.de/?tn=0&l0=cl&l1=8080 |date=October 11, 2006 }}
• [https://web.archive.org/web/20070928060215/http://www.datasheetarchive.com/search.php?q=8080 Scan of the Intel 8080 data book at DataSheetArchive.com]
• [http://donbot.com/MicrocomputerDesign/SE/M001.html Microcomputer Design, Second Edition, 1976] {{Webarchive|url=https://web.archive.org/web/20120311032333/http://donbot.com/MicrocomputerDesign/SE/M001.html |date=March 11, 2012 }}
• [http://www.bluishcoder.co.nz/js8080/ 8080 Emulator written in JavaScript] {{Webarchive|url=https://web.archive.org/web/20100317080605/http://www.bluishcoder.co.nz/js8080/ |date=March 17, 2010 }}
• [https://github.com/begoon/i8080-js/ Intel 8080/KR580VM80A emulator in JavaScript] {{Webarchive|url=https://web.archive.org/web/20180611025338/https://github.com/begoon/i8080-js |date=June 11, 2018 }}
• [http://www.nj7p.info/Manuals/PDFs/Intel/9800153B.pdf Intel 8080 Microcomputer Systems User's Manual (September 1975, 262 pages)] {{Webarchive|url=https://web.archive.org/web/20180310201916/http://www.nj7p.info/Manuals/PDFs/Intel/9800153B.pdf |date=March 10, 2018 }}
• [http://www.elenota.pl/datasheet-pdf/133557/Intel/8080 Intel 8080 Microcomputer Systems User's Manual (September 1975, 234 pages)] {{Webarchive|url=https://web.archive.org/web/20130226005332/http://www.elenota.pl/datasheet-pdf/133557/Intel/8080 |date=February 26, 2013 }}
• [https://sbc-85.com/download/8085-reference-card-hex/ Intel 8080/8085 Instruction Reference Card] {{Webarchive|url=https://web.archive.org/web/20210810014546/https://sbc-85.com/download/8085-reference-card-hex/ |date=August 10, 2021 }}

• {{US patent reference|number=4010449|issue-date=March 1, 1977|inventor=Federico Faggin, Masatoshi Shima, Stanley Mazor|title=MOS computer employing a plurality of separate chips}} This patent contains three claims. The first two relate to the status word multiplexed onto the data bus. The third claim is for the {{code|RST 7}} instruction which can be invoked by pulling the data bus high. The prior art 8008 {{code|RST 7}} required more complicated instruction jamming circuitry.

{{Intel processors|discontinued}}

{{Authority control}}

8080

Category:8-bit microprocessors

Category:Computer-related introductions in 1974