Lamco Eurocub
{{Short description|Hungarian ultralight aircraft}}
{{Use dmy dates|date=March 2021}}
{{Use British English|date=December 2022}}
| {{Infobox Aircraft Begin
|name=Lamco Eurocub |image= Eurocub.jpg |caption= }}{{Infobox Aircraft Type |type=Fixed wing ultralight aircraft |manufacturer=Danex Engineering Kft |status=Out of production }} |
The Lamco Eurocub is a Hungarian ultralight aircraft with fixed conventional landing gear, manufactured by Danex Engineering Kft. It is used primarily for flight training, touring and personal flying.
The aircraft is currently not in production and a purchaser for the design, jigs and rights is being sought.
Design and development
The Lamco Eurocub is a single-engined, high-wing monoplane with two seats in side-by-side configuration. The Eurocub is manufactured with either an 80 hp (60 kW) Rotax 912 UL engine or a 100 hp (75 kW) Rotax 912 ULS engine. The engine drives the propeller, which has ground-adjustable pitch, through a gearbox with a 2.43:1 reduction ratio.
The aircraft's fuselage, stabilizers, rudders and landing gear are constructed of welded steel tubes. The wing spars are made of extruded Dural 6061-T6 aluminium. The aircraft is covered in Ceconite aircraft fabric covering. The firewall is made of stainless steel.
Specifications (Eurocub Mk IV)
{{Aircraft specs
|ref=Pilot's operating handbook[http://www.barkarbyflygklubb.se/Flyghandbok%20Eurocub%202002-01-09.pdf Pilot's operating handbook] (Swedish)
|prime units?=met
|genhide=
|crew=one
|capacity=one passenger
|length m=5.70
|length ft=
|length in=
|length note=
|span m=9.55
|span ft=
|span in=
|span note=
|height m=
|height ft=
|height in=
|height note=
|wing area sqm=14.00
|wing area sqft=
|wing area note=
|aspect ratio=
|airfoil=
|empty weight kg=
|empty weight lb=
|empty weight note=
|gross weight kg=450
|gross weight lb=
|gross weight note=
|fuel capacity={{convert|82|L}}
|more general=
|eng1 number=1
|eng1 name=Rotax 912UL
|eng1 type=four cylinder, liquid and air-cooled, four stroke aircraft engine
|eng1 kw=60
|eng1 hp=
|prop blade number=3
|prop name=Warp Drive Inc or Ivoprop carbon fiber laminate with on-the-ground-adjustable pitch.
|prop dia m=
|prop dia ft=5
|prop dia in=8
|prop note=
|perfhide=
|max speed kmh=
|max speed mph=
|max speed kts=
|max speed note=
|cruise speed kmh=
|cruise speed mph=
|cruise speed kts=
|cruise speed note=
|stall speed kmh=
|stall speed mph=
|stall speed kts=33
|stall speed note=
|never exceed speed kmh=
|never exceed speed mph=
|never exceed speed kts=110
|never exceed speed note=
|range km=
|range miles=
|range nmi=
|range note=
|endurance=
|ceiling m=
|ceiling ft=
|ceiling note=
|g limits=
|roll rate=
|glide ratio=
|climb rate ms=
|climb rate ftmin=
|climb rate note=
|time to altitude=
|sink rate ms=
|sink rate ftmin=
|sink rate note=
|lift to drag=
|wing loading kg/m2=
|wing loading lb/sqft=
|wing loading note=
|power/mass=
|thrust/weight=
|more performance=
|avionics=
}}