Meter Point Administration Number#Line Loss Factor Class (LLFC)

An MPAN is commonly separated into two sections: the core and the top line data. The core is the final 13 digits and is the unique identifier. The top line data gives information about the characteristics of the supply and is the responsibility of the supplier.

The full MPAN is required to be depicted on electricity bills (the boxes on the top and bottom line are generally unaligned).{{cite web | url=http://energylinx.co.uk/mpan.htm | title=MPAN (Meter Point Administration Number) | author=Energy Linx | year=2007 | accessdate=2007-02-22}}

centre

The core data is on the second line, the supplementary data on the first. Only the last digit on the bottom row is the check digit.

The first two digits of a full MPAN reflect its profile class.{{cite web|url=http://www.elexon.co.uk/ELEXON%20Documents/bscp516_v7.0.pdf |author=Elexon |title=BSCP516 – Balancing and Settlement Code |accessdate=2011-07-25 |url-status=dead |archiveurl=https://web.archive.org/web/20120319031827/http://www.elexon.co.uk/ELEXON%20Documents/bscp516_v7.0.pdf |archivedate=2012-03-19 }}

Profile class 00 supplies are half-hourly (HH) metered, i.e. they record electricity consumption for every half hour of every day, and supplies of the other profile classes are non-half-hourly (NHH) metered. A NHH supply must be upgraded to HH where:{{cite web |last=Elexon |title=Change of Measurement Class and Change of Profile Class |date=2015-06-25 |url=https://www.elexon.co.uk/wp-content/uploads/2015/06/change_of_measurement_profile_class_v11.0.pdf |accessdate=2016-07-05 |url-status=dead |archiveurl=https://web.archive.org/web/20160817055349/https://www.elexon.co.uk/wp-content/uploads/2015/06/change_of_measurement_profile_class_v11.0.pdf |archivedate=2016-08-17 }}

{{cquote|Any Metering System where the average of the maximum monthly electrical demands in the three months of highest demand, either in:

:a. the previous twelve months; or

:b. the period since the most recent Significant Change of Demand (whichever is the shorter)

exceeds 100kW.}}

HH data is recorded by the meter and collected by an onsite download, or by remote communication methods such as GSM, SMS, GPRS or telephone line.

Domestic NHH import MPANs always have a profile class of 01 or 02. Domestic NHH export MPANs are allocated a profile class of 08.

The MTC is a 3 digit code that reflects the various registers a meter may have, such as a single rate, day/night split, or a seasonal time of day.{{cite web | url=http://mrasco.com/admin/documents/The_Rough_Guide_To_MTCs.pdf | author=MRASCo | title=The Rough Guide To MTCs | accessdate=2011-02-05 | archive-url=https://web.archive.org/web/20160113042907/http://mrasco.com/admin/documents/The_Rough_Guide_To_MTCs.pdf | archive-date=2016-01-13 | url-status=dead }}{{cite web|url=http://mddonline.elexon.co.uk/mddtable.aspx?tbl=Meter+Timeswitch+Class |author=Elexon |title=Meter Timeswitch Class table |accessdate=2011-08-23 |url-status=dead |archiveurl=https://web.archive.org/web/20110426000854/http://mddonline.elexon.co.uk/mddtable.aspx?tbl=Meter%2BTimeswitch%2BClass |archivedate=April 26, 2011 }}

The Line Loss Factor Class or LLFC{{cite web | url=http://www.elexon.co.uk/glossary/line-loss-factor-classes/ | title=Line Loss Factor Class(es) | authorlink=Elexon | work=Elexon Glossary | accessdate=2013-01-27 }} is an alphanumeric code used to identify the related Distribution Use of System (DUoS) charges for the MPAN. The figure reflects both the amount of distribution infrastructure used to supply the exit point and the amount of energy lost through heating of cables, transformers, etc.

The MPAN core is the final 13 digits of the MPAN, and uniquely identifies an exit point. It consists of a two-digit Distributor ID, followed by an eight-digit unique identifier, then by two digits and a single check digit.

Image:Distribution Network Operators.PNG

Great Britain is divided into fourteen distribution areas. For each area a single company, the distribution network operator, has a licence to distribute electricity.{{cite web |author= |year= |title=MPAN (Meter Point Administration Number) |url=https://www.energylinx.co.uk/mpan.htm |accessdate=23 October 2023 |website=Energylinx}} They effectively carry electricity from the National Grid to the exit points (each having a unique MPAN and a possibility of several meters) where the customers are. The owner of the distribution network charges electricity suppliers for carrying the electricity in their network. Their DNO licensed regions are the same geographic areas as the former nationalised electricity boards.

In addition to the distribution network operators noted above who are licensed for a specific geographic area, there are also independent distribution network operators (IDNOs). These own and operate electricity distribution networks which are mostly network extensions connected to the existing distribution network, e.g. to serve new housing developments.

Scottish Hydro Electric Power Distribution also provide distribution services in South Scotland as an IDNO and Southern Electric Power Distribution provide IDNO services in all other England and Wales areas. Other IDNOs have no "base" area.{{cite web | url=http://www.ofgem.gov.uk/temp/ofgem/cache/cmsattach/12925_24605.pdf | author=Ofgem | title=Notice under section 11 of the Electricity Act 1989 | accessdate=2007-02-22 | archiveurl=https://web.archive.org/web/20051230010301/http://www.ofgem.gov.uk/temp/ofgem/cache/cmsattach/12925_24605.pdf | archivedate=December 30, 2005}}

The supply identified by the MPAN can be in one of four states: disconnected, de-energised, live, and new.

• Disconnected: The service cable has been removed and the MPAN will not be reused.
• De-energised: The service cable is in place, but the fuse has been removed. The meter remains connected to the distribution network, but no electricity can be used.
• Live: Both the service cable and the fuse are in place. The supply is fully operational.
• New: A new MPAN has been generated, however, the top line (supplementary data consisting of the Profile Class and Meter Time-Switch Code) is not yet complete. The service cable may or may not be installed.

These terms are by no means standardised. For example, a disconnected supply might be referred to as a 'dead' supply.

The vast majority of MPANs are import MPANs, where energy is being consumed. However, if a supply exports to the distribution network, then an export MPAN is issued. If a supply both imports and exports, then both an import MPAN and export MPAN are issued.

Formerly, export MPANs required a half-hourly compliant meter to be installed. Since 2003, it has been possible for microgeneration projects, with a capacity of 30 kW or below, to have a non-half-hourly meter to measure export back into the distribution network. Uptake was slow, with the first microgeneration export MPAN being issued in June 2005. Some suppliers may not bother to register the export MPAN in MPAS as the revenue is so small.{{Citation needed|date=March 2022}}

Following the closure of the feed-in tariffs, in January 2020 Ofgem introduced the Smart Export Guarantee (SEG) arrangements, where an export MPAN is allocated to allow a supplier to pay a customer for export of low-carbon energy.{{Cite web |title=Smart Export Guarantee (SEG) |url=https://www.ofgem.gov.uk/environmental-and-social-schemes/smart-export-guarantee-seg |access-date=2022-03-04 |website=Ofgem |language=en}}{{Cite web |date=23 December 2019 |title=Smart Export Guarantee (SEG) Terms and Conditions |url=https://www.ovoenergy.com/pdf/smart-export-guarantee-ts-cs.pdf |access-date=4 March 2022 |website=OVO Energy}}

Export capacity over 30 kW is required to be half-hourly metered. As part of the Marketwide Half Hourly Arrangements (MHHS), all export consumption will be required to be registered and settled on a half-hourly basis.{{Citation needed|date=March 2022}}

The Metered Supply Point (MSP) is the point at which the meter measuring a customer's consumption is located. It is thus also the point at which either the distribution network operator's supply, or the building network operator's lateral cable, terminates and the customer's equipment begins. In order to firmly establish a supply's MSP, the MPAN needs to be associated with a meter serial number.

Although it is common for an MPAN to be associated with one meter serial number, in some cases there is a many-to-many relationship. For example, one meter could be associated with both an import and an export MPAN, or one MPAN could be measured by three separate meters.

It is possible for small predictable supplies to be unmetered.{{Cite web|url=https://www.elexon.co.uk/operations-settlement/unmetered-supplies/|title=Unmetered Supplies|website=ELEXON|access-date=3 January 2019}} Examples are street lights, traffic signals, signs, bollards, telephone kiosks, CCTV and advertising displays.

For an item of equipment to be connected to the distribution network via an unmetered connection, its consumption should typically not exceed 500 watts and it should operate in a predictable manner, with no provision for it to be manually turned on/off at the end user's request. Generally the equipment would either be in operation and taking a supply of electricity 24 hours a day, or be controlled by a photocell, as is often the case for street lights.

It is the customer's responsibility to maintain an accurate and up-to-date inventory of unmetered supplies, and to inform the UMSO (UnMetered Supplies Operator) of all changes to the connected equipment within one month of the change.

Larger local authorities generally have unmetered supplies with a demand over 100kW and are required to trade their unmetered energy on a half-hourly basis. To do so, they employ a meter administrator{{cite web | title=Meter Administrator | author=Power Data Associates Ltd | url=http://www.powerdataassociates.com/unmetered}}{{cite web | title=Meter Administrator | author=ICTIS (UK) Ltd | url=http://www.ictis.net/meter-administrator.htm}} who will use daily data from a photo-electric control unit (PECU) array which is then used to calculate the energy consumption. A PECU array is a device that holds a representative number of the photocells that authority uses on their street lights or traffic signals.{{Cite web|url=https://www.powerdataassociates.com/photo-electric-control-unit-arrays|title=Photo Electric Control Unit Arrays|website=Power Data Associates|access-date=4 March 2022}} By trading energy as unmetered half-hourly the authority will accurately pay for the energy consumed by their declared unmetered equipment, and because the data is downloaded daily the authority will see their energy invoices change throughout the year to represent the changes in the seasonal daily lighting levels.

If, however, the unmetered supplies are being traded as non half-hourly the UMSO undertakes the responsibility to calculate an EAC (Estimated Annual Consumption). This is done using a simple formula which takes into account the circuit watts of the equipment and the annual hours of operation. For example, a piece of equipment that is in use 24 hours per day will have annual hours of 8766. For, say, a CCTV camera rated at 24 circuit watts the EAC would be 210.384kWh, calculated as circuit watts × annual hours divided by 1000. As a result of Ofgem's decision to progress with Marketwide Half Hourly Settlement (MHHS) all new unmetered supplies from April 2024 will be half hourly and existing non half-hourly unmetered supplies will move to half hourly trading during 2024.

If the equipment is street lighting the same process is used for non half-hourly; however, the annual hours will change as each photocell is assigned a set number of annual hours which indicate how and when the lights turn on and off. These annual hours have been set by Elexon and are not locally agreed with the UMSO by the customer.

Once an EAC calculation has taken place, an EAC Certificate is provided to the customer's appointed electricity supplier for billing, with an electronic copy of the EAC being sent to the appointed data collector. The DNO make a Distribution Use of System charge on the electricity supplier for the delivery of the electricity to the customer's unmetered equipment.

Each non-half-hourly supply has a four digit code called the Standard Settlement Configuration (SSC), which specifies the number of registers a meter has, and the times that each register is recording electricity usage. The times that a register is recording is specified with a five digit code Time Pattern Regime (TPR). So for example a supply with SSC 0943 has two registers with TPRs 00404 and 00405. The 00404 TPR register records from 01:00 to 02:30 and 08:00 to 23:30, and the 00405 register records for the rest of the time.{{cite web|last=Elexon |authorlink= |title=What are Standard Settlement Configurations? |date=2011-12-12 |url=https://www.elexonportal.co.uk/faq/view/429 |accessdate=2016-07-05 }}

Each DNO operates a Meter Point Administration System (MPAS) which holds the following information for each MPAN:

• Supplier
• Data Collector (DC)
• Data Aggregator (DA)
• Meter Operator (MOP) or Meter Administrator for HH unmetered
• Customer
• Address of the exit point
• Associated MPANs
• MPAN state
• Profile Class (PC)
• Line Loss Factor Class (LLFC)
• Meter Time Switch Class (MTC)
• GSP Group

MPRS is the name of the software package that implements the MPAS system for all DNOs.{{cite web | title=Metering Point Registration System | author=St. Clements Services Ltd | url=http://www.st-clements.co.uk/MPRS.html| accessdate=2008-05-29}} Since MPRS is used by most DNOs it is often used interchangeably with the term MPAS.

ECOES (formally the Electricity Central Online Enquiry Service) is now the Electricity Enquiry Service (EES) is a website that allows users and authorised industry parties to search for supply details (past and present) using such things as the 13-digit MPAN bottom line number, the meter serial number or the postcode. The user can determine a wide range of data relating to the supply including the full address, meter details, the current energisation status and also the appointed parties (i.e. the supplier, distributor, MOP, DC and DA). The site is populated from information sent from the supplier regarding the metering system.{{cite web | title=Access to ECOES Data | author=MRASCO | url=http://www.mrasco.com/index.php?option=com_content&view=article&id=29&Itemid=29 | accessdate=2009-07-11}}

Only non-domestic users (with two valid MPANs that are not Profile Class 1 or 2) can register to access this service.{{cite web|title=Briefing_Note_on_Customer_Access_NDC_2|url=https://www.ecoes.co.uk/documents/user_guides/Briefing_Note_on_Customer_Access_NDC_2.pdf|website=ECOES|publisher=MRASCO|accessdate=25 June 2015}}

The final digit in the MPAN is the check digit, and validates the previous 12 (the core) using a modulus 11 test. The check digit is calculated thus:

1. Multiply the first digit by 3
2. Multiply the second digit by the next prime number (5)
3. Repeat this for each digit (missing 11 out on the list of prime numbers for the purposes of this algorithm)
4. Add up all these products
5. The check digit is the sum modulo 11 modulo 10.{{cite web |url=http://www.energy-retail.org.uk/pdfs/Data%20Item%20Definition%20v1%20final.pdf |title=Data Item Definition v1 final |author=Energy Retail Association |page=23 |url-status=dead |archiveurl=https://web.archive.org/web/20070925074454/http://www.energy-retail.org.uk/pdfs/Data%20Item%20Definition%20v1%20final.pdf |archivedate=2007-09-25 |accessdate=2014-02-25}}

• Energy accounting software
• Meter operator
• Mains electricity
• Distribution network operator
• Electrical power industry
• Electricity billing in the UK

• Specific definitions of meter timeswitch codes can be found on the MRASCo [https://web.archive.org/web/20120303233318/http://www.mrasco.com/useful-documentation/meter-timeswitch-codes documentation page].
• [https://www.ecoes2.co.uk/ ECOES (Electricity Central Online Enquiry Service)]
• [https://bitbucket.org/tlocke/mpan Implementations of the MPAN check digit algorithm]

{{Reflist|2}}

{{Energy in the United Kingdom|sources}}

Category:Electric power in the United Kingdom

Category:Electricity meters