Mountnessing Windmill
{{Short description|Windmill in Essex, England}}
{{Use dmy dates|date=April 2022}}
{{Use British English|date=February 2023}}
{{Infobox Windmill
|name = Mountnessing Mill
|image = Mountnessing windmill.jpg
|image_size = 250px
|caption = The restored mill, April 2007
|name_of_mill =Mountnessing Mill
|location_of_mill = {{oscoor|TQ631979|TQ 631 979}}
|coordinates = {{Coord|51.656|0.358|type:landmark_region:GB|display=inline,title|format=dms}}
|operator =Essex County Council
|built =1807
|purpose =Corn mill
|type =Post mill
|storeys =
|roundhouse_storeys =Single storey roundhouse
|sail_number =Four sails
|sail_type =Spring sails
|windshaft =Cast iron
|winding =Tailpole
|auxpower =Portable steam engine
|pairs_of_millstones=Two pairs
|stone_size =
|other =
}}
Mountnessing Windmill is a grade II* listed{{NHLE| num= 1293205| desc = MOUNTNESSING WINDMILL, ROMAN ROAD (north off), MOUNTNESSING, BRENTWOOD, ESSEX| access-date= 2008-05-31}} post mill at Mountnessing, Essex, England. Built in 1807, it was most recently restored to working order in 1983.
History
Mountnessing Windmill was built in 1807, replacing an earlier mill. There are records of a windmill here since 1477. The mill was working until 1924, and it worked again in 1932–33.{{cite book | first = Kenneth| last = Farries| year = 1985| title = Essex Windmills, Millers and Millwrights - Volume Four- A Review by Parishes, F-R| pages= 80–83| publisher = Charles Skilton| location = Edinburgh| isbn = 0-284-98642-9}}
In 1937, ownership of the mill passed from the Blencowe Estates to Mountnessing Parish Council. It was repaired as a memorial to King George VI, whose coronation was in that year.
Restoration
The mill was restored to working order between 1979 and 1983. A complete new roof was fitted, and the tail of the mill rebuilt. New sails were fitted, and the mill officially opened by Hervey BenhamAuthor of a book on Essex watermills on 13 November 1983. The internal machinery has been rebuilt by Peter Stenning and Richard Seago, and the mill is in full working order.
Description
{{for|an explanation of the various pieces of machinery|Mill machinery}}
Mountnessing Windmill is a post mill with a single-storey sixteen-sided roundhouse. The mill is winded by a tailpole. It has four spring sails. There are two pairs of millstones in the breast.
=Trestle and roundhouse=
The trestle is of oak, with the main post of elm. The crosstrees are {{convert|22|ft|m|2}} long, {{convert|13|in|mm|0}} by {{convert|10|in|mm|0}} in section. The underside of the lower crosstree is {{convert|5|ft|6|in|m|2}} above ground level. The main post is nearly {{convert|19|ft|m|2}} in length, {{convert|29|in|mm|0}} square at its base. The quarterbars are {{convert|13|in|mm|0}} by {{convert|10|in|mm|0}} in section. The mill was originally built as an open trestle mill, with a roundhouse added at a later date. Three of the crosstree/quarterbar joints have been strengthened with bolted splints. The sixteen-sided roundhouse is of brick, with a boarded roof covered in tarred felt. It had a thatched roof until 1909, when it was replaced as it was infested with rats.
=Body=
The body of the mill measures just under {{convert|18|ft|m|2}} by {{convert|11|ft|m|2}} in plan. The crowntree is {{convert|22|in|mm|0}} square in section. It receives a {{convert|10|in|mm|0}} diameter pintle projecting from the top of the main post. The side girts are {{convert|9|in|mm|0}} by {{convert|20|in|mm|0}} in section at the ends, thickening to {{convert|22|in|mm}} at the crosstree.
=Sails and windshaft=
As originally built, the mill would have had a wooden windshaft and four common sails. The sails are spring sails. The windshaft is of cast iron, replacing the former wooden one. It was probably second-hand when fitted to the mill. It has a mounting for a tail wheel, which would have been forward-facingi.e. with the cogs facing the front of the mill when fitted; this and other evidence shows that the mill was originally built with a head and tail layout.
=Machinery=
The wooden brake wheel is of clasp arm construction. It has 77 cogs of {{convert|4|in|mm|0}} pitch, driving a wooden wallower with 21 cogs. The cast-iron spur wheel is {{convert|3|ft|6|in|m|2}} diameter with 66 cogs. It drives the two pairs of millstones underdrift via two {{convert|22|in|mm|0}} diameter stone nuts with 32 cogs each. The mill was assisted in its later years by a portable steam engine, which had been built by Wedlake & Dendy Ltd., Engineers of Hornchurch and carried their works number 74.
Millers
Public access
The mill is open to the public on the third Sunday of each month between May and October.{{cite web| url= http://www.brentwood-council.gov.uk/textonly/index.php?id=29&lid=366&l2id=401&cid=388| publisher =Brentwood Borough Council| title = Mountnessing Windmill| access-date= 2008-05-31}} {{Dead link|date=October 2010|bot=H3llBot}}
References
{{reflist}}
External links
- [http://www.visitparks.co.uk/places/mountnessing-post-mill/ Essex Country Parks] webpage on Mountnessing Post Mill
- [http://www.windmillworld.com/millid/2677.htm Windmill World] webpage on Mountnessing Windmill
{{EssexWindmills}}
Category:Post mills in the United Kingdom
Category:Grinding mills in the United Kingdom
Category:Windmills completed in 1807
Category:Grade II* listed buildings in Essex
Category:Mill museums in England