Open Graphics Project

{{Use dmy dates|date=August 2017}}

{{Update|date=February 2011}}

{{Infobox project

| name = Open Graphics Project

| logo =

| website = {{URL|http://web.archive.org/web/20100609075313/http://wiki.opengraphics.org/tiki-index.php|wiki.opengraphics.org}} at the Wayback Machine (archived June 9, 2010)

| commercial = Yes

| type = Open hardware

| location =

| owner =

| founder =

| established =

| funding =

}}

Image:Ogd1 layers2.png

The Open Graphics Project (OGP) was founded with the goal to design an open-source hardware / open architecture and standard for graphics cards, primarily targeting free software / open-source operating systems. The project created a reprogrammable development and prototyping board and had aimed to eventually produce a full-featured and competitive end-user graphics card.

OGD1

Image:Ogd1 showcase preview.jpg

The project's first product was a PCI graphics card dubbed OGD1, which used a field-programmable gate array (FPGA) chip. Although the card did not have the same level of performance or functionality as graphics cards on the market at the time, it was intended to be useful as a tool for prototyping the project's first application-specific integrated circuit (ASIC) board, as well as for other professionals needing programmable graphics cards or FPGA-based prototyping boards. It was also hoped that this prototype would attract enough interest to gain some profit and attract investors for the next card, since it was expected to cost around US$2,000,000 to start the production of a specialized ASIC design. PCI Express and/or Mini-PCI variations were planned to follow. The OGD1 began shipping in September 2010,{{Cite web | url = http://lists.duskglow.com/open-graphics/2010-September/012160.html | title = OGD1's Now Available! | access-date = 12 January 2017 | archive-url = https://web.archive.org/web/20170615123107/http://lists.duskglow.com/open-graphics/2010-September/012160.html | archive-date = 15 June 2017 | url-status = dead }} some six years after the project began and 3 years after the appearance of the first prototypes.{{Cite web| url = http://www.theinquirer.net/default.aspx?article=36761 | archive-url = https://web.archive.org/web/20070115142617/http://www.theinquirer.net/default.aspx?article=36761 | url-status = dead | archive-date = 15 January 2007 | title = First Open Graphics board appears | publisher = The Inquirer }}

Full specifications will be published and open-source device drivers will be released. All RTL will be released. Source code to the device drivers and BIOS will be released under the MIT and BSD licenses. The RTL (in Verilog) used for the FPGA and the RTL used for the ASIC are planned to be released under the GNU General Public License (GPL).

It has 256 MiB of DDR RAM, is passively cooled, and follows the DDC, EDID, DPMS and VBE VESA standards. TV-out is also planned.

= Versioning schema =

Versioning schema for OGD1 will go like this:

{Root Number} – {Video Memory}{Video Output Interfaces}{Special Options e.g.: A1 OGA firmware installed}

class="wikitable"

!Field

!Example Value

!Example Description

Root number

|OGD1P-

|OGD1 board with PCI Bus

Video memory

|256

|256 MiB

colspan=3 |Video outputs, in order, skip any not installed
First interface

|D

|Dual-link DVI

Second interface

|D

|Dual-link DVI

Third interface

|A

|Analog video, 75 ohm, VGA compatible

Fourth interface

|V

|TV video

colspan=3 |Special options, in alphanumeric order, each preceded by a dash
Factory firmware-RTL

|A1

|OGA1 Firmware

= OGD1 components =

Image:Ogd1illus-vector.svg

Main components of OGD1 graphics card (shown on the picture)

{{cite web

|title = OGD1 map guide

|publisher = Open Graphics wiki

|url = http://wiki.duskglow.com/tiki-page.php?pageName=OGD1_Map_Guide

|accessdate = 2006-09-04

|url-status = dead

|archiveurl = https://web.archive.org/web/20070927065410/http://wiki.duskglow.com/tiki-page.php?pageName=OGD1_Map_Guide

|archivedate = 27 September 2007

|df = dmy-all

}}

:A) DVI transmitter pair A

:B) DVI transmitter pair B

:C) 330MHz triple 10-bit DAC (behind)

:D) TV chip

:E) 2x4 256 megabit DDR SDRAM (front, behind)

:F) Xilinx 3S4000 FPGA (main chip)

:G) Lattice XP10 FPGA (host interface)

:H) SPI PROM 1 Mibit

:J) SPI PROM 16 Mibit

:K) 3x 500 MHz DACs (optional)

:L) 64-bit PCI-X edge connector

:M) DVI-I connector A and connector B

:N) S-Video connector

:O) 100-pin expansion bus connector

Current status

The OGP project failed to gain the necessary funding to produce an ASIC version of its card. The project appears to have been discontinued in 2011.

See also

{{Portal|Electronics|Free and open-source software}}

References

{{Reflist}}