Photometry (astronomy)#Calibrations

File:Eta Carinae lightcurve at multiple wavelengths (1987 - 2014).png light curve in several different passbands]]

Astronomy was among the earliest applications of photometry. Modern photometers use specialised standard passband filters across the ultraviolet, visible, and infrared wavelengths of the electromagnetic spectrum. Any adopted set of filters with known light transmission properties is called a photometric system, and allows the establishment of particular properties about stars and other types of astronomical objects.{{cite journal

|last1=Bessell |first1=M.S.

|title=Standard Photometric Systems

|journal=Annual Review of Astronomy and Astrophysics

|volume=43

|issue=1

|date=September 2005

|pages=293–336

|bibcode=2005ARA&A..43..293B

|issn=0066-4146

|doi=10.1146/annurev.astro.41.082801.100251

|url=http://www.mso.anu.edu.au/~bessell/araapaper.pdf}} Several important systems are regularly used, such as the UBV system{{cite journal

|last1=Johnson |first1=H. L.

|last2=Morgan |first2=W. W.

|date=1953

|title=Fundamental stellar photometry for standards of spectral type on the revised system of the Yerkes spectral atlas

|journal=The Astrophysical Journal |volume=117

|number=3

|pages=313–352

|bibcode = 1953ApJ...117..313J

|doi = 10.1086/145697}} (or the extended UBVRI system{{cite journal

|last1=Landolt |first1=A.U.

|title=UBVRI photometric standard stars in the magnitude range 11.5-16.0 around the celestial equator

|journal=The Astronomical Journal

|volume=104

|pages=340–371

|date=1 July 1992

|bibcode = 1992AJ....104..340L

|doi=10.1086/116242|doi-access=free

}}), near infrared JHK{{cite journal

|last1=Hewett|first1=P.C.

|last2=Warren|first2=S.J.

|last3=Leggett|first3=S.K.

|last4=Hodgkin|first4=S.T.

|title=The UKIRT Infrared Deep Sky Survey ZY JHK photometric system: passbands and synthetic colours

|year=2006

|journal=Monthly Notices of the Royal Astronomical Society

|volume=367

|issue=2

|pages=454–468

|doi=10.1111/j.1365-2966.2005.09969.x

|arxiv=astro-ph/0601592

|bibcode=2006MNRAS.367..454H|doi-access=free

}} or the Strömgren uvbyβ system.

Historically, photometry in the near-infrared through short-wavelength ultra-violet was done with a photoelectric photometer, an instrument that measured the light intensity of a single object by directing its light onto a photosensitive cell like a photomultiplier tube. These have largely been replaced with CCD cameras that can simultaneously image multiple objects, although photoelectric photometers are still used in special situations,{{cite web

|title=Photoelectric Astronomy

|date=2015

|url=https://www.atnf.csiro.au/outreach//education/senior/astrophysics/photometry_photoelectricastro.html

|website=CSIRO : Australian Telescope National Facility

|author=CSIRO Astronomy and Space Science

|access-date=21 May 2019}} such as where fine time resolution is required.{{cite web

|title=CCD Photometry

|url=http://www.britastro.org/vss/ccd_photometry.htm

|website=British Astronomical Association

|author=Walker, E.W.

|access-date=21 May 2019}}

Modern photometric methods define magnitudes and colours of astronomical objects using electronic photometers viewed through standard coloured bandpass filters. This differs from other expressions of apparent visual magnitude observed by the human eye or obtained by photography: that usually appear in older astronomical texts and catalogues.

Magnitudes measured by photometers in some commonplace photometric systems (UBV, UBVRI or JHK) are expressed with a capital letter, such as "V" (m_V) or "B" (m_B). Other magnitudes estimated by the human eye are expressed using lower case letters, such as "v", "b" or "p", etc.{{cite web

|title=The Stellar Magnitude System

|date=1 August 2006

|url=https://www.skyandtelescope.com/astronomy-resources/the-stellar-magnitude-system/

|website=Sky and Telescope

|author=MacRobert, A.

|access-date=21 May 2019}} E.g. Visual magnitudes as m_v,{{cite book

|last=Norton |first=A.P.

|title=Norton's 2000.0 : Star Atlas and Reference Handbook

|url=https://archive.org/details/nortons20000star00nort |url-access=registration |year=1989

|page=[https://archive.org/details/nortons20000star00nort/page/133 133]

|publisher=Longmore Scientific

|isbn=0-582-03163-X}} while photographic magnitudes are m_ph / m_p or photovisual magnitudes m_p or m_pv. Hence, a 6th magnitude star might be stated as 6.0V, 6.0B, 6.0v or 6.0p. Because starlight is measured over a different range of wavelengths across the electromagnetic spectrum and are affected by different instrumental photometric sensitivities to light, they are not necessarily equivalent in numerical value. For example, apparent magnitude in the UBV system for the solar-like star 51 Pegasi{{Cite journal

|last=Cayrel de Strobel |first=G.

|date=1996

|title=Stars resembling the Sun

|journal=Astronomy and Astrophysics Review

|volume=7

|issue=3

|pages=243–288

|doi = 10.1007/s001590050006

|bibcode = 1996A&ARv...7..243C|s2cid=189937884

}} is 5.46V, 6.16B or 6.39U,{{cite web

|title=51 Peg

|work=SIMBAD

|publisher=Centre de Données astronomiques de Strasbourg

|url=http://simbad.u-strasbg.fr/simbad/sim-id?Ident=51+Pegasi

|access-date=22 May 2019}} corresponding to magnitudes observed through each of the visual 'V', blue 'B' or ultraviolet 'U' filters.

Magnitude differences between filters indicate colour differences and are related to temperature.{{cite web

|title=The Colour of Stars

|date=2002

|url=https://www.atnf.csiro.au/outreach//education/senior/astrophysics/photometry_colour.html

|website=CSIRO : Australian Telescope National Facility

|author=CSIRO Astronomy and Space Science

|access-date=21 May 2019}} Using B and V filters in the UBV system produces the B–V colour index. For 51 Pegasi, the B–V = 6.16 – 5.46 = +0.70, suggesting a yellow coloured star that agrees with its G2IV spectral type.{{cite journal

|last1=Keenan|first1=R.C.

|last2=McNeil|first2=P.C.

|title=The Perkins Catalog of Revised MK Types for the Cooler Stars

|year=1989

|journal=The Astrophysical Journal Supplement Series

|volume=71

|pages=245–266

|doi=10.1086/191373

|bibcode=1989ApJS...71..245K|s2cid=123149047

}} Knowing the B–V results determines the star's surface temperature,{{cite web

|url=http://www.asterism.org/tutorials/tut35%20Magnitudes.pdf

|author=Luciuk, M.

|title=Astronomical Magnitudes

|page=2

|access-date=22 May 2019}} finding an effective surface temperature of 5768±8 K.{{cite journal

|title=Chromospheric activity and evolutionary age of the Sun and four solar twins

|journal=Astronomy & Astrophysics

|volume=591

|pages=A89

|year=2016

|last1=Mittag |first1=M.

|last2=Schröder |first2=K.-P.

|last3=Hempelmann |first3=A.

|last4=González-Pérez |first4=J.N.

|last5=Schmitt |first5=J.H.M.M.

|doi=10.1051/0004-6361/201527542

|bibcode=2016A&A...591A..89M

|arxiv=1607.01279|s2cid=54765864

}}

Another important application of colour indices is graphically plotting star's apparent magnitude against the B–V colour index. This forms the important relationships found between sets of stars in colour–magnitude diagrams, which for stars is the observed version of the Hertzsprung-Russell diagram. Typically photometric measurements of multiple objects obtained through two filters will show, for example in an open cluster,{{cite web

|title=PHY217 Observational Techniques for Astronomers : P05: Absolute Photometry

|year=2015

|url=http://slittlefair.staff.shef.ac.uk/teaching/phy217/lectures/principles/L05/index.html

|website=University of Sheffield : Department of Physics and Astronomy

|author=Littlefair, S.

|access-date=24 May 2019

|archive-date=13 September 2019

|archive-url=https://web.archive.org/web/20190913224315/http://slittlefair.staff.shef.ac.uk/teaching/phy217/lectures/principles/L05/index.html

|url-status=dead

}} the comparative stellar evolution between the component stars or to determine the cluster's relative age.{{cite web

|title=Open Star Clusters : 8 of 10 : Evolution of Open Star Clusters

|date=19 April 2017

|url= http://www.southastrodel.com/Page03008.htm

|website=Southern Astronomical Delights

|author=James, A.

|access-date=20 May 2019}}

Due to the large number of different photometric systems adopted by astronomers, there are many expressions of magnitudes and their indices. Each of these newer photometric systems, excluding UBV, UBVRI or JHK systems, assigns an upper or lower case letter to the filter used. For example, magnitudes used by Gaia are 'G'{{cite journal

|last1=Jordi|first1=C.

|last2=Gebran|first2=M.

|last3=Carrasco|first3=J.~M.

|last4=de Bruijne|first4=J.

|last5=Voss|first5=H.

|last6=Fabricius|first6=C.

|last7=Knude|first7=J.

|last8=Vallenari|first8=A.

|last9=Kohley|first9=R.

|last10=More|first10=A.

|title=Gaia broad band photometry

|year=2010

|journal=Astronomy and Astrophysics

|volume=523

|pages=A48

|doi=10.1051/0004-6361/201015441

|bibcode=2010A&A...523A..48J

|arxiv=1008.0815|s2cid=34033669

}} (with the blue and red photometric filters, G_BP and G_RP{{cite web

|title=Expected Nominal Mission Science Performance

|date=16 March 2019

|url=https://www.cosmos.esa.int/web/gaia/science-performance#photometric%20performance

|website=GAIA :European Space Agency

|access-date=23 May 2019}}) or the Strömgren photometric system having lower case letters of 'u', 'v', 'b', 'y', and two narrow and wide 'β' (Hydrogen-beta) filters. Some photometric systems also have certain advantages. For example, Strömgren photometry can be used to measure the effects of reddening and interstellar extinction.{{cite journal

|last=Paunzen|first=E.

|title=A new catalogue of Strömgren-Crawford uvbyβ photometry

|date=2015

|journal=Astronomy and Astrophysics

|volume=580

|pages=A23

|doi=10.1051/0004-6361/201526413

|bibcode=2015A&A...580A..23P

|arxiv =1506.04568|s2cid=73623700

}} Strömgren allows calculation of parameters from the b and y filters (colour index of b − y) without the effects of reddening, as the indices m ₁ and c ₁.

File:AERONET sunphotometer.jpg photometer]]

There are many astronomical applications used with photometric systems. Photometric measurements can be combined with the inverse-square law to determine the luminosity of an object if its distance can be determined, or its distance if its luminosity is known. Other physical properties of an object, such as its temperature or chemical composition, may also be determined via broad or narrow-band spectrophotometry.

Photometry is also used to study the light variations of objects such as variable stars, minor planets, active galactic nuclei and supernovae, or to detect transiting extrasolar planets. Measurements of these variations can be used, for example, to determine the orbital period and the radii of the members of an eclipsing binary star system, the rotation period of a minor planet or a star, or the total energy output of supernovae.

A CCD (charge-coupled device) camera is essentially a grid of photometers, simultaneously measuring and recording the photons coming from all the sources in the field of view. Because each CCD image records the photometry of multiple objects at once, various forms of photometric extraction can be performed on the recorded data; typically relative, absolute, and differential. All three will require the extraction of the raw image magnitude of the target object, and a known comparison object.

The observed signal from an object will typically cover many pixels according to the point spread function (PSF) of the system. This broadening is due to both the optics in the telescope and the astronomical seeing. When obtaining photometry from a point source, the flux is measured by summing all the light recorded from the object and subtracting the light due to the sky.{{cite journal

| last = Mighell| first = K.J.

| date = 1999

| title = Algorithms for CCD Stellar Photometry

| journal = ASP Conference Series

| volume = 172

| pages = 317–328| bibcode = 1999ASPC..172..317M}} The simplest technique, known as aperture photometry, consists of summing the pixel counts within an aperture centered on the object and subtracting the product of the nearby average sky count per pixel and the number of pixels within the aperture.{{cite journal

| last1 = Laher| first1 = R.R.

| display-authors = 1

| last2 = Gorjian| first2 = V.

| last3 = Rebull| first3 = L.M.

| last4 = Masci| first4 = F.J.

| last5 = Fowler| first5 = J.W.

| last6 = Helou| first6 = G.

| last7 = Kulkarni| first7 = S.R.

| last8 = Law| first8 = N.M.

|date= 2012

|title = Aperture Photometry Tool

|journal = Publications of the Astronomical Society of the Pacific

|volume = 124

|issue = 917

|pages = 737–763

|doi=10.1086/666883

|bibcode = 2012PASP..124..737L| s2cid = 21572643

| url = https://authors.library.caltech.edu/34358/1/666883.pdf

}} This will result in the raw flux value of the target object. When doing photometry in a very crowded field, such as a globular cluster, where the profiles of stars overlap significantly, one must use de-blending techniques, such as PSF fitting to determine the individual flux values of the overlapping sources.

After determining the flux of an object in counts, the flux is normally converted into instrumental magnitude. Then, the measurement is calibrated in some way. Which calibrations are used will depend in part on what type of photometry is being done. Typically, observations are processed for relative or differential photometry.{{cite book|author=Gerald R. Hubbell|title=Scientific Astrophotography: How Amateurs Can Generate and Use Professional Imaging Data|url=https://books.google.com/books?id=tJCceLB84Z8C|date=9 November 2012|publisher=Springer Science & Business Media|isbn=978-1-4614-5173-0}}

Relative photometry is the measurement of the apparent brightness of multiple objects relative to each other. Absolute photometry is the measurement of the apparent brightness of an object on a standard photometric system; these measurements can be compared with other absolute photometric measurements obtained with different telescopes or instruments. Differential photometry is the measurement of the difference in brightness of two objects. In most cases, differential photometry can be done with the highest precision, while absolute photometry is the most difficult to do with high precision. Also, accurate photometry is usually more difficult when the apparent brightness of the object is fainter.

{{Unreferenced section|date=May 2019}}

To perform absolute photometry one must correct for differences between the effective passband through which an object is observed and the passband used to define the standard photometric system. This is often in addition to all of the other corrections discussed above. Typically this correction is done by observing the object(s) of interest through multiple filters and also observing a number of photometric standard stars. If the standard stars cannot be observed simultaneously with the target(s), this correction must be done under photometric conditions, when the sky is cloudless and the extinction is a simple function of the airmass.

{{Unreferenced section|date=May 2019}}

To perform relative photometry, one compares the instrument magnitude of the object to a known comparison object, and then corrects the measurements for spatial variations in the sensitivity of the instrument and the atmospheric extinction. This is often in addition to correcting for their temporal variations, particularly when the objects being compared are too far apart on the sky to be observed simultaneously. When doing the calibration from an image that contains both the target and comparison objects in close proximity, and using a photometric filter that matches the catalog magnitude of the comparison object most of the measurement variations decrease to null.

{{Unreferenced section|date=May 2019}}

Differential photometry is the simplest of the calibrations and most useful for time series observations. When using CCD photometry, both the target and comparison objects are observed at the same time, with the same filters, using the same instrument, and viewed through the same optical path. Most of the observational variables drop out and the differential magnitude is simply the difference between the instrument magnitude of the target object and the comparison object (∆Mag = C Mag – T Mag). This is very useful when plotting the change in magnitude over time of a target object, and is usually compiled into a light curve.

For spatially extended objects such as galaxies, it is often of interest to measure the spatial distribution of brightness within the galaxy rather than simply measuring the galaxy's total brightness. An object's surface brightness is its brightness per unit solid angle as seen in projection on the sky, and measurement of surface brightness is known as surface photometry. A common application would be measurement of a galaxy's surface brightness profile, meaning its surface brightness as a function of distance from the galaxy's center. For small solid angles, a useful unit of solid angle is the square arcsecond, and surface brightness is often expressed in magnitudes per square arcsecond. The diameter of galaxies are often defined by the size of the 25th magnitude isophote in the blue B-band.{{Cite book

|last1=Sparke

|first1=L. S.

|author1-link=Linda Sparke

|last2=Gallagher

|first2=J. S. III

|date=2000

|title=Galaxies in the Universe: An Introduction

|publisher=Cambridge University Press

|isbn=978-0-521-59740-1

|url=https://books.google.com/books?id=tzNF79roUfoC

|access-date=July 25, 2018

|archive-date=March 24, 2021

|archive-url=https://web.archive.org/web/20210324072126/https://books.google.com/books?id=tzNF79roUfoC

|url-status=live

}}

In forced photometry, measurements are conducted at a specified location rather than for a specified object. It is "forced" in the sense that a measurement can be taken even if there is no object visible (in the spectral band of interest) in the location being observed. Forced photometry allows extracting a magnitude, or an upper limit for the magnitude, at a chosen sky location.{{cite web | url=https://outerspace.stsci.edu/display/PANSTARRS/PS1+Forced+photometry+of+sources | title=PS1 Forced photometry of sources - PS1 Public Archive - STScI Outerspace }}{{cite journal |last1=Makrygianni |first1=L. |last2=Mullaney |first2=J. |last3=Dhillon |first3=V. |title=Processing GOTO survey data with the Rubin Observatory LSST Science Pipelines II: Forced Photometry and lightcurves |journal=Publications of the Astronomical Society of Australia |date=2021 |volume=38 |doi=10.1017/pasa.2021.19 |arxiv=2105.05128 |bibcode=2021PASA...38...25M |display-authors=etal}}{{cite journal | url=https://link.springer.com/article/10.1134/S1063773722030021 | doi=10.1134/S1063773722030021 | title=Forced Photometry for Pan-STARRS1 Objects Based on WISE Data | year=2022 | last1=Burenin | first1=R. A. | journal=Astronomy Letters | volume=48 | issue=3 | pages=153–162 | bibcode=2022AstL...48..153B | s2cid=253022975 | url-access=subscription }}

A number of free computer programs are available for synthetic aperture photometry and PSF-fitting photometry.

SExtractor{{cite web |url=http://www.astromatic.net/software/sextractor |title=SExtractor{{nbsp}}– Astromatic.net |website=www.astromatic.net}} and Aperture Photometry Tool{{cite web |url=http://www.aperturephotometry.org |title=Aperture Photometry Tool: Home |website=www.aperturephotometry.org}} are popular examples for aperture photometry. The former is geared towards reduction of large scale galaxy-survey data, and the latter has a graphical user interface (GUI) suitable for studying individual images.

DAOPHOT is recognized as the best software for PSF-fitting photometry.{{cite journal

|last=Stetson |first= P.B.

| date = 1987

| title = DAOPHOT: A Computer Program for Crowded-Field Stellar Photometry

| journal = Publications of the Astronomical Society of the Pacific

| volume = 99

| pages = 191–222

| doi=10.1086/131977

|bibcode = 1987PASP...99..191S | doi-access = free

}}

There are a number of organizations, from professional to amateur, that gather and share photometric data and make it available on-line. Some sites gather the data primarily as a resource for other researchers (ex. AAVSO) and some solicit contributions of data for their own research (ex. CBA):

• American Association of Variable Star Observers (AAVSO).{{cite web|url=http://www.aavso.org|title=aavso.org|website=www.aavso.org}}
• Astronomyonline.org{{cite web|url=http://astronomyonline.org/Exoplanets/AmateurDetection.asp|title=Exoplanet - Amateur Detection|website=astronomyonline.org}}
• Center for Backyard Astrophysics (CBA).{{cite web|url=http://www.cbastro.org|title=CBA @ cbastro.org - Center for Backyard Astrophysics|website=www.cbastro.org}}

• Albedo
• Aperture Photometry Tool - Software
• Bidirectional reflectance distribution function
• Hapke parameters
• Radiometry
• Redshift survey
• Spectroscopy

{{Reflist}}

• {{cite web|url=https://www.atnf.csiro.au/outreach//education/senior/astrophysics/photometry_links.html

|title=Photometry Links

|website=CSIRO : Australian Telescope National Facility|date=2019-05-08

}}

{{Astronomy navbox}}

{{Authority control}}

{{DEFAULTSORT:Photometry (Astronomy)}}

Category:Astrophysics

Category:Electromagnetic radiation

Category:Light pollution

Category:Observational astronomy

Category:Photometric systems

Category:Radiometry