Rumpler Tropfenwagen

Rumpler, born in Vienna, was known as a designer of aircraft when at the 1921 Berlin car show he introduced the Tropfenwagen. It was to be the first streamlined production car, before the Chrysler Airflow and Tatra T77. The Rumpler was already wind tunnel optimized at the Aerodynamics Research Institute in Göttingen[https://twitter.com/dlr_de/status/1130437658390482944 German Aerospace Center (twitter)], accessed on 01/09/2023 and had a drag coefficient of only 0.28, a value that astonished later engineers when they tested the Tropfenwagen in the 1970s.Tested at a Volkswagen windtunnel in 1979. Lyons, Pete. "10 Best Ahead-of-Their-Time Machines", in Car and Driver, 1/88, p.73. This would be competitive even today. For comparison: the top ten most aerodynamic production cars in 2014/2015 were in the range 0.26 down to 0.19.[https://motorburn.com/2014/01/12-of-the-most-aerodynamic-cars-in-production-right-now/ 12 of the most aerodynamic cars in production right now – Motorburn][https://www.cheatsheet.com/automobiles/wave-of-the-future-10-of-the-sleekest-cars-on-the-road.html/ 10 of the Sleekest Cars on the Road — CheatSheet.com] The Fiat Balilla of the mid-1930s, by contrast, was rated at 0.60.{{cite encyclopedia |last= Setright |first= L. J. K. |author-link= L. J. K. Setright |editor= Tom Northey |encyclopedia= World of Automobiles |title= Aerodynamics: Finding the Right Shape for the Car Body |year= 1974 |publisher= Orbis |volume= 1 |location= London |page= 38}} To enable the car's aerodynamic shape, the Tropfenwagen also featured the world's first (single plane) curved windows in a production car. Both the windscreen and the side windows were significantly curved.[http://www.autospeed.com/cms/article.html?&title=The-Rumpler-Tropfenwagen&A=113084 The Rumpler Tropfenwagen – AutoSpeed]

But Rumpler wasn't the first with the idea of a streamlined car. At least in 1913 Castagna and Alfa Romeo built the prototype Aerodinamica with similar ideas.[https://theoldmotor.com/?p=43433 The Castagna Bodied 1913 Alfa Romeo Aerodinamica], accessed on 01/09/2023

The car featured a Siemens and Halske-built{{cite encyclopedia |last= Burgess-Wise |first= David |author-link= David Burgess-Wise |editor= Tom Northey |encyclopedia= World of Automobiles |title= Rumpler: One Aeroplane which Never Flew |year= 1974 |publisher= Orbis |volume= 17 |location= London |page= 1964}} {{convert|2580|cc|cid|abbr=on}} overhead valve W6 engine, with three banks of paired cylinders, all working on a common crankshaft.{{cite book |last= Rogliatti |first= Gianni |editor= Cyril Posthumus |editor-link= Cyril Posthumus |title= Period Cars |pages= 108–109 |year= 1973| publisher = Hamlyn |location= Feltham, Middlesex, UK |isbn= 0-600-33401-5}} Producing {{cvt|36|hp|kW|disp=flip}}, it was mounted just ahead of the rear axle.Wise, p.1965 diagram. The engine, transmission, and final drive were assembled together and installed as a unit. The Rumpler-invented rear swing axles were suspended by trailing leaf springs, while the front beam axle was suspended by leading leaf springs.

Able to seat four or five,Wise, p.1966. all the passengers were carried between the axles for maximum comfort, while the driver was alone at the front, to maximize view. With the 1923 model, two tip-up seats were added.

Weighing {{cvt|1400|kg|0}}, the Tropfenwagen was nevertheless capable of {{cvt|70|mph|km/h|disp=flip}} on its mere {{cvt|36|hp|kW|disp=flip}}. This performance got the attention of Benz & Cie.'s chief engineer, Hans Nibel. Nibel conceived the Mercedes-Benz Tropfenwagen racers using the virtually unchanged Rumpler chassis. Poor sales and increasing losses led Benz to abandon the project.Wise, p.1965. Later Auto Union racing cars resembled the Benz Tropfenwagen racers and were built in part by Rumpler engineers.

Rumpler made another attempt in 1924, the 4A106, which used a {{cvt|50|hp|kW|disp=flip}} {{convert|2614|cc|cid|abbr=on}} inline 4-cylinder engine. This compelled a growth in wheelbase, with a consequent increase in seating to six or seven.

Although the car was very advanced for its time, it sold poorly – about 100 cars were built. Sales were hindered by small problems at the start (cooling, steering), the appearance of the vehicle, and the absence of a luggage compartment. Most were sold as taxis, where easy boarding and the high ceiling were advantages. The last cars were built in 1925.

The Tropfenwagen became famous thanks to the film Metropolis, in which Rumplers found a burning end.{{Cite web |title=Rumpler Tropfen-Auto in "Metropolis" |url=https://www.imcdb.org/v035386.html |access-date=2025-06-03 |website=IMCDb.org |language=en}} It also inspired the Mercedes-Benz 130H / 150H / 170H road cars.Lyons, p.74.

Only two examples are known to survive, one in the Verkehrszentrum branch of the Deutsches Museum in Munich, and one in the German Museum of Technology in Berlin.

• Streamliner: Automobiles for overview of early aerodynamic automobiles

;Other early teardrop-shaped cars, chronologically:

• Persu car (1922–23), designed by Romanian engineer Aurel Persu, who improved on the Tropfenwagen by placing the wheels inside the car body
• Stout Scarab (1932–35, 1946), US
• Dymaxion car (1933), US
• Schlörwagen (1939), German prototype, never produced

{{reflist}}

{{Commons category|Rumpler Tropfenwagen}}

• [http://www.deutsches-museum.de/sammlungen/meisterwerke/meisterwerke-iii/tropfenwagen/ Deutsches Museum about Rumpler] {{in lang|de}}
• [http://www.autospeed.com/cms/A_113084/article.html The Rumpler Tropfenwagen - An astonishing car - Autospeed.com]

{{DEFAULTSORT:Rumpler, Edmund}}

Category:Austrian inventions

Category:Defunct motor vehicle manufacturers of Germany

Category:Rear mid-engine, rear-wheel-drive vehicles

Category:Vehicles introduced in 1921