SmartLynx Airlines Estonia

{{Short description|Estonian airline}}

{{Undisclosed paid|date=January 2024}}

{{Infobox airline

| airline = SmartLynx Airlines Estonia

| logo = SmartLynx Airlines logo.png

| logo_size = 250

| fleet_size = 8

| destinations =

| aoc = EE-015

| IATA = -

| ICAO = MYX

| callsign = TALLINN CAT

| founded = {{Start date and age|2012}}

| commenced = {{Start date and age|2012}}

| headquarters = Lennujaama tee 13, Tallinn, Estonia

| key_people =

| subsidiary =

| bases = {{plainlist| *Tallinn Airport}}

| alliance =

| website = {{url|www.smartlynx.aero}}

| image =

| hubs =

| focus_cities =

| frequent_flyer =

| parent = SmartLynx Airlines

| num_employees =

}}

SmartLynx Airlines Estonia is an Estonian charter airline and a wholly owned subsidiary of the Latvian SmartLynx Airlines.

History

The airline commenced operations in 2012 with aircraft from its parent company and since gradually acquired its own fleet. As of June 2015, the subsidiary employed 40 people.{{Cite web |title=StackPath |url=https://www.smart-lynx.com/corporate/about-smartlynx/about |access-date=2022-07-18 |website=www.smart-lynx.com}}

Fleet

File:ES-SAM_A320_Smart_Lynx_ACE_21-03-16_(27453501980).jpg]]

{{As of|2025|2}}, the SmartLynx Airlines Estonia fleet consists of the following aircraft:{{cite web|url=http://www.smartlynx.aero/corporate/fleet|title=Fleet - Corporate - SmartLynx Airlines|website=www.smartlynx.aero}}{{cite journal|title=Global Airline Guide 2019 (Part One)|journal=Airliner World|issue=October 2019|page=13}}{{cite web|url=https://www.ecaa.ee/et/lennundustehnika-ja-lennutegevus/ohusoidukite-register/registri-andmed|title=ECAA Aircraft Register|accessdate=7 September 2017}}

class="wikitable" style="margin:1em auto; border-collapse:collapse;text-align:center"

|+ SmartLynx Airlines Estonia fleet

bgcolor=#75aadb

! Aircraft

! In service

! Orders

! Passengers

! Notes

Airbus A320-200

|8

|—

|180

|

Total

!8

!—

!colspan="2"|

Accidents and incidents

= SmartLynx Estonia Flight 9001 =

On 28 February 2018, a SmartLynx Estonia Airbus A320-214 (registered ES-SAN) whilst operating for SmartLynx Estonia Flight 9001, was a training flight for 4 new student pilots. Aboard the flight was also an Instructor, a second pilot and an Estonian Civil Aviation Administration inspector. The flight had to do five touch-and-go landing cycles and two full-stop landings for each student. While one of the student pilots was controlling the aircraft during takeoff, they lifted the side-stick back; however, the aircraft ceased to respond. It soon gained altitude but thereafter rapidly lost elevation, and engine 2 hit the runway and again gained altitude and climbed to 1590 ft, and subsequently pitched down again. The aircraft also was not responding to several flight inputs. Pilots used manual pitch trim and engine thrust to stabilize the flight path and make a turn back to the runway. Shortly after, engine 2 flamed out and failed; and, during final approach, engine 1 also flamed out and failed. The safety pilot recognized the problem in time, and the instructor took control from the trainee. The aircraft touched down hard {{convert|150|m|ft}} from the runway. No one aboard was killed; however, there was severe damage to the aircraft, and it was subsequently written off.{{Cite web|last=Ranter|first=Harro|title=ASN Aircraft accident Airbus A320-214 ES-SAN Tallinn-Lennart Meri Airport (TLL)|url=https://aviation-safety.net/database/record.php?id=20180228-0|access-date=2021-05-24|website=aviation-safety.net}}{{Cite web |title=Lennuõnnetus, A320-214 kokkupõrge lennurajaga {{!}} Ohutusjuurdlus keskus |trans-title=INVESTIGATION REPORT ACCIDENT, LOSS OF CONTROL WITH AIRBUS A320-214 NEAR TALLINN AIRPORT ON 28.02.2018 |url=https://www.ojk.ee/lennuonnetus-a320-214-kokkuporge-lennurajaga |archive-url= |access-date=2024-01-31 |website=Estonian Safety Investigation Bureau}}

Investigation later found that the accident was caused by a combination of factors which contributed to the accident.

  • A part of the plane that helps control its movement (THSA) wasn’t working properly because of the wrong oil used. This caused a loss of control by the plane’s elevator and aileron computers (ELACs). The plane’s maintenance didn’t include a check of a safety device (OVM), which might have let this problem go unnoticed.
  • There was a design issue in another computer (SEC) which caused a loss of control when there was a temporary issue with the left landing gear. Not having ground spoilers ready for landing during training may have contributed to this problem.
  • The training instructor decided to keep flying despite the repetitive warning messages from the ELAC. There weren’t clear rules for training flights and there was pressure to finish the training.

References

{{Reflist}}