St. Mary's Church (Beaverville, Illinois)

Prominent Chicago church architect Joseph Molitor designed the church in the Romanesque Revival style. The church was built using limestone blocks with a rough-cut exterior. The church has an L-shaped plan with a small wing in the back forming the leg. The building is both the tallest structure in Beaverville and the most visible landmark in the village.{{cite web|last=Brown|first=Valerie|title=National Register of Historic Places Registration Form: St. Mary's Church|url=http://gis.hpa.state.il.us/pdfs/201048.pdf|archive-url=https://web.archive.org/web/20131212103329/http://gis.hpa.state.il.us/pdfs/201048.pdf|url-status=dead|archive-date=December 12, 2013|publisher=National Park Service|access-date=December 7, 2013|date=December 16, 1995}}

The church's main entrance is located on its west side; the three sets of double doors are each topped by a stained glass transom. A pair of four-story towers are located on either side of the entrance. The third and fourth floors of each tower are open with pilasters framing the arched openings; balustrades run along the third-floor apertures, while the fourth-floor openings feature keystones and classical cornices. Triangular pediments are situated atop both towers.

The center of the church includes an octagonal section topped by a dome roof. The roof is composed of red French clay tiles. Each side of the octagon is {{convert|52|ft}} long with a {{convert|32|ft}} base. A small flat octagonal section at the top of the dome is fenced off by an iron railing. Seven secondary gable roofs cover the other parts of the church, while a smaller octagon tops the wing; these other roofs are also shingled with red tiles. Roughly 22,000 tiles were used to construct the church's roofs.

Each side of the church features seven arched stained glass windows on its first floor. Six windows on each side have the same dimensions, while a larger window is located in the base of the octagon. Each side of the octagon's second story includes three smaller windows. The wing includes five additional stained glass windows; two are located on each floor of the west side, while the fifth is on the east side's second story.

The St. Mary's parish was established in 1857, when the village of Beaverville was known as St. Marie. The parish opened its own school in 1895 and established a convent the following year. Due to the parish's increasing congregation, construction began on the current church building in 1909. The new church was dedicated in 1911; however, the building's construction debts were not fully paid until 1945. After its debt was cleared, the congregation decorated the interior of the church; however, many of these decorations were lost to renovations in the 1970s. The parish's elementary and high schools closed in 1965 and 1969 respectively; services are still held in the church, however.

{{reflist}}

{{commonscat-inline}}

• [http://www.stmaryschurchbeaverville.com Church website]

{{Roman Catholic Diocese of Joliet in Illinois}}

{{National Register of Historic Places}}

{{DEFAULTSORT:Saint Mary's Church, Beaverville, Illinois}}

Category:Roman Catholic churches completed in 1911

Category:Buildings and structures in Iroquois County, Illinois

Category:Churches on the National Register of Historic Places in Illinois

Category:Renaissance Revival architecture in Illinois

Category:Churches in the Roman Catholic Diocese of Joliet in Illinois

Category:Romanesque Revival church buildings in Illinois

Category:1857 establishments in Illinois

Category:Religious organizations established in 1857

Category:Tourist attractions in Iroquois County, Illinois

Category:National Register of Historic Places in Iroquois County, Illinois

Category:20th-century Roman Catholic church buildings in the United States