Standard-definition television

SDTV originated from the need for a standard to digitize analog TV (defined in BT.601) and is now used for digital TV broadcasts and home appliances such as game consoles and DVD disc players.{{cite web |title=BT.601: Studio encoding parameters of digital television for standard 4:3 and wide screen 16:9 aspect ratios |url=https://www.itu.int/rec/R-REC-BT.601/ |publisher=ITU}}

Digital SDTV broadcast eliminates the ghosting and noisy images associated with analog systems. However, if the reception has interference or is poor, where the error correction cannot compensate one will encounter various other artifacts such as image freezing, stuttering, or dropouts from missing intra-frames or blockiness from missing macroblocks. The audio encoding is the last to suffer a loss due to the lower bandwidth requirements.{{Citation needed|date=April 2024}}

Standards that support digital SDTV broadcast include DVB, ATSC, and ISDB. The last two were originally developed for HDTV, but are also used for their ability to deliver multiple SD video and audio streams via multiplexing.

The two SDTV signal types are 576i (with 576 interlaced lines of resolution,{{cite web |title=What means 576i? |url=http://www.afterdawn.com/glossary/terms/576i.cfm |website=Afterdawn.com}} derived from the European-developed PAL and SECAM systems), and 480i (with 480 interlaced lines of resolution,{{cite web |title=What means 480i? |url=https://www.afterdawn.com/glossary/term.cfm/480i |website=afterdawn.com}} based on the American NTSC system). SDTV refresh rates are 25, 29.97 and 30 frames per second, again based on the analog systems mentioned.

In North America, digital SDTV is broadcast in the same 4:3 fullscreen aspect ratio as NTSC signals, with widescreen content often being center cut.{{cite web |title=All-Digital Television Is Coming (And Sooner Than You Think!) |url=http://www.fcc.gov/cgb/consumerfacts/digitaltv.html |url-status=dead |archive-url=https://web.archive.org/web/20080929041527/http://www.fcc.gov/cgb/consumerfacts/digitaltv.html |archive-date=Sep 29, 2008 |website=Federal Communications Commission}}

In other parts of the world that used the PAL or SECAM color systems, digital standard-definition television is now usually shown with a 16:9 aspect ratio, with the transition occurring between the mid-1990s and late-2000s depending on the region. Older programs with a 4:3 aspect ratio are broadcast with a flag that switches the display to 4:3. Some broadcasters prefer to reduce the horizontal resolution by anamorphically scaling the video into a pillarbox.{{Citation needed|date=April 2024}}

The pixel aspect ratio is the same for 720- and 704-pixel resolutions because the visible image (be it 4:3 or 16:9) is contained in the center 704 horizontal pixels of the digital frame. In the case of a digital video line having 720 horizontal pixels (including horizontal blanking), only the center 704 pixels contain the actual 4:3 or 16:9 image, and the 8-pixel-wide stripes on either side are called nominal analog blanking or horizontal blanking and should be discarded when displaying the image. Nominal analog blanking should not be confused with overscan, as overscan areas are part of the actual 4:3 or 16:9 image.

For SMPTE 259M-C compliance, an SDTV broadcast image is scaled to 720 pixels wide for every 480 NTSC (or 576 PAL) lines of the image with the amount of non-proportional line scaling dependent on either the display or pixel aspect ratio. Only 704 center pixels contain the actual image and 16 pixels are reserved for horizontal blanking, though a number of broadcasters fill the whole 720 frames.{{cn|date=April 2024}} The display ratio for broadcast widescreen is commonly 16:9 (pixel aspect ratio of 40:33 for anamorphic); the display ratio for a traditional or letterboxed broadcast is 4:3 (pixel aspect ratio of 10:11).

An SDTV image outside the constraints of the SMPTE standards requires no non-proportional scaling with 640 pixels (defined by the adopted IBM VGA standard) for every line of the image. The display and pixel aspect ratio is generally not required with the line height defining the aspect. For widescreen 16:9, 360 lines define a widescreen image and for traditional 4:3, 480 lines define an image.

{{portal|Television}}

• {{anl|Digital Audio Broadcasting}}
• {{anl|Moving Picture Experts Group}}
• {{anl|Rec. 601}}

{{reflist}}

• [http://lurkertech.com/lg/video-systems Programmer's Guide to Video Systems]

{{TV resolution}}

{{Video formats}}

Category:ATSC

Category:Digital television

Category:Broadcast engineering

Category:Broadband

Category:Television technology