Standard gravity
{{short description|Standard gravitational acceleration on Earth}}
The standard acceleration of gravity or standard acceleration of free fall, often called simply standard gravity and denoted by {{math|ɡ0}} or {{math|ɡn}}, is the nominal gravitational acceleration of an object in a vacuum near the surface of the Earth. It is a constant defined by standard as {{cvt|9.80665|m/s2||sigfig=7|disp=x| (about |)|comma=gaps}}. This value was established by the third General Conference on Weights and Measures (1901, CR 70) and used to define the standard weight of an object as the product of its mass and this nominal acceleration.{{cite report |editor1-first=Barry N.|editor1-last=Taylor|editor2-first=Ambler|editor2-last=Thompson |date=March 2008 |title=The international system of units (SI) |url=https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication330e2008.pdf|publisher=National Institute of Standards and Technology |page=52 |docket=NIST special publication 330, 2008 edition }}{{cite book |url=http://www.bipm.org/utils/common/pdf/si_brochure_8_en.pdf#page=51 |title=The International System of Units (SI) |publisher=International Bureau of Weights and Measures |edition=8th |year=2006 |isbn=92-822-2213-6 |pages=142–143}} The acceleration of a body near the surface of the Earth is due to the combined effects of gravity and centrifugal acceleration from the rotation of the Earth (but the latter is small enough to be negligible for most purposes); the total (the apparent gravity) is about 0.5% greater at the poles than at the Equator.{{cite conference
|first=Richard
|last=Boynton
|title=Precise Measurement of Mass
|book-title=Sawe Paper No. 3147
|publisher=S.A.W.E., Inc.
|date=2001
|location=Arlington, Texas
|url=http://www.space-electronics.com/Literature/Precise_Measurement_of_Mass.PDF
|access-date=2007-01-21
|archive-date=2007-02-27
|archive-url=https://web.archive.org/web/20070227132140/http://www.space-electronics.com/Literature/Precise_Measurement_of_Mass.PDF
|url-status=dead
Although the symbol {{math|ɡ}} is sometimes used for standard gravity, {{math|ɡ}} (without a suffix) can also mean the local acceleration due to local gravity and centrifugal acceleration, which varies depending on one's position on Earth (see Earth's gravity). The symbol {{math|ɡ}} should not be confused with {{math|G}}, the gravitational constant, or g, the symbol for gram. The {{math|ɡ}} is also used as a unit for any form of acceleration, with the value defined as above.{{See also|g-force}}
The value of {{math|ɡ0}} defined above is a nominal midrange value on Earth, originally based on the acceleration of a body in free fall at sea level at a geodetic latitude of 45°. Although the actual acceleration of free fall on Earth varies according to location, the above standard figure is always used for metrological purposes. In particular, since it is the ratio of the kilogram-force and the kilogram, its numeric value when expressed in coherent SI units is the ratio of the kilogram-force and the newton, two units of force.
History
Already in the early days of its existence, the International Committee for Weights and Measures (CIPM) proceeded to define a standard thermometric scale, using the boiling point of water. Since the boiling point varies with the atmospheric pressure, the CIPM needed to define a standard atmospheric pressure. The definition they chose was based on the weight of a column of mercury of 760 mm. But since that weight depends on the local gravity, they now also needed a standard gravity. The 1887 CIPM meeting decided as follows:
{{quote|The value of this standard acceleration due to gravity is equal to the acceleration due to gravity at the International Bureau (alongside the Pavillon de Breteuil) divided by 1.0003322, the theoretical coefficient required to convert to a latitude of 45° at sea level.{{cite book |title=From Artefacts to Atoms: The BIPM and the Search for Ultimate Measurement Standards |author=Terry Quinn |page=127 |publisher=Oxford University Press |year=2011 |isbn=978-0-19-530786-3}}}}
All that was needed to obtain a numerical value for standard gravity was now to measure the gravitational strength at the International Bureau. This task was given to Gilbert Étienne Defforges of the Geographic Service of the French Army. The value he found, based on measurements taken in March and April 1888, was 9.80991(5) m⋅s−2.{{cite conference |author=M. Amalvict |chapter=Chapter 12. Absolute gravimetry at BIPM, Sèvres (France), at the time of Dr. Akihiko Sakuma |title=Gravity, Geoid and Earth Observation: IAG Commission 2: Gravity Field |editor=Stelios P. Mertikas |pages=84–85 |publisher=Springer |year=2010 |isbn=978-3-642-10634-7}}
This result formed the basis for determining the value still used today for standard gravity. The third General Conference on Weights and Measures, held in 1901, adopted a resolution declaring as follows:
{{quote|The value adopted in the International Service of Weights and Measures for the standard acceleration due to Earth's gravity is 980.665 cm/s2, value already stated in the laws of some countries.{{cite web |title=Resolution of the 3rd CGPM (1901) |url=https://www.bipm.org/en/committees/cg/cgpm/3-1901/resolution-2 |publisher=BIPM |access-date=July 19, 2015}}}}
The numeric value adopted for {{math|ɡ0}} was, in accordance with the 1887 CIPM declaration, obtained by dividing Defforges's result – 980.991 cm⋅s−2 in the cgs system then en vogue – by 1.0003322 while not taking more digits than are warranted considering the uncertainty in the result.
Conversions
{{Acceleration conversions}}