Thames Measurement

{{Short description|Measurement system approximating the internal volume of a vessel}}

Thames Measurement, also known as Thames Tonnage, is a system for measuring ships and boats. It was created in 1855 as a variation of Builder's Old Measurement by the Royal Thames Yacht Club, and was designed for small vessels, such as yachts. It was originally used for calculating the port dues for yachts; the formula was also used in some early handicapping systems for yacht racing.{{cite book|editor1-last=Kemp|editor1-first=Peter|title=The Oxford Companion to Ships and the Sea|date=1979|publisher=Oxford University Press|location=Oxford|isbn=0-19-211553-7|page=[https://archive.org/details/oxfordcompaniont00kemp/page/864 864]|url-access=registration|url=https://archive.org/details/oxfordcompaniont00kemp/page/864}}

The calculation of Thames Tonnage uses the following formula:

: $\backslash text\{Thames\; Tonnage\}\; =\; \backslash frac\; \{(\backslash text\{length\}-\backslash text\{beam\})\; \backslash times\; \backslash text\{beam\}\; \backslash times\; \backslash frac\; \{\backslash text\{beam\}\}\{2\}\}\; \{94\}$

where:

• length is the length, in feet, from the stempost to sternpost;
• beam is the maximum beam, in feet.

This can be simplified as:

: $\backslash text\{Thames\; Tonnage\}\; =\; \backslash frac\; \{(\backslash text\{length\}-\backslash text\{beam\})\; \backslash times\; \backslash text\{beam\}^2\}\; \{188\}$