User:Ninjashoes/Romex cable

{{Userspace draft|source=ArticleWizard|date=March 2010}}

Romex is brand name of Non-Metallic (“NM”) electrical wiring used in buildings and construction. Romex cable consists of two to four insulated wires and a bare wire for grounding surrounded by a flexible plastic jacket.http://homerenovations.about.com/od/electrical/a/artromexnm.htm Romex is a registered trademark of Southwire Company.http://tess2.uspto.gov/bin/showfield?f=doc&state=4010:3lid5m.2.1 Romex USPTO trademark

History

Romex was first developed in in 1922 by the former Rome Wire Company, a predecessor to General Cable Corporation. In 2001, Southwire purchased the electrical building wire division of General Cable Corporation, including the Romex brand. Type NM cable continues to be sold under the brand name Romex by Southwire. [http://www.southwire.com/romex.htm Romex history]

Variations

Southwire sells two types wires under the Romex brand: NM-B and NMD90.

Type NM-B Romex

Type NM-B Romex cable is intended for use in both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the National Electrical Code. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not subject to excessive moisture or dampness. Voltage rating for NM-B cable is 600 volts.http://www.southwire.com/products/RomexSIMpullTypeNMBOEM.htm

Type NMD90 Romex

Type NMD90 Romex cable can be used for both exposed work in dry locations or concealed work in dry or damp locations. Specifications call for maximum allowable conductor temperature is 90°C. The maximum voltage rating for NMD90 Romex is 300 volts.http://www.southwire.com/products/RomexSIMpullNMD90.htm

References

{{Reflist}}