Vu+
The Vu+ (pronounced VuPlus), is a series of Linux-powered DVB satellite, terrestrial digital television receivers (set-top box), produced by Korean multimedia brand Ceru Co., Ltd.
History and description
All older Vu+ hardware set-top boxes are MIPS-powered, newer are all ARM-powered and uses Enigma2 image based software as firmware.
Its firmware is officially user-upgradable, since it is a Linux-based computer, as opposed to third-party "patching" of alternate receivers. Firmware is based on Enigma 2, which was originally designed for Dreambox by Dream Multimedia. All units support Conax conditional access (CA) system, with software-emulated conditional-access modules (CAMs) available for many alternate CA systems. The built-in Ethernet interface allows networked computers to access the recordings on the internal hard disks and stream live picture from the tuners. It also enables the receiver to store digital copies of DVB MPEG transport streams on networked filesystems or broadcast the streams as IPTV to VideoLAN and XBMC Media Center clients. Unlike many PC based PVR systems that use free-to-air type of DVB receiver cards, the built-in conditional access allows receiving and storing encrypted content.
In the beginning of September in 2011, Dream Multimedia obtained a temporary injunction against the Satco Europe GmbH company for using their "Enigma 2" name in an advertising flyer to promote the Linux operating system installed on the Vu+ set-top-boxes, as "Enigma"(2) is a registered trademark name of Dream Multimedia GmbH.
Models
Vu+Duo Front.JPG|Vu+ Duo front
Vu+Duo Back.jpg|Vu+ Duo back
VU+ Duo2 - front.jpg|VU+ Duo2 front
VU+ Duo2 - back.jpg|VU+ Duo2 back
| class="wikitable"
!Vu+ !!Ultimo !!Ultimo 4K !!Uno !!Uno 4K !Solo !!Solo2 !!Solo SE !!Solo SE V2 !!Solo 4K !!Duo !!Duo2 !!Duo 4K !!Duo 4K SE !!Zero !!Zero 4K |
| Production
|{{No|Discontinued}} ||{{No|Discontinued}} ||{{No|Discontinued}} ||{{No|Discontinued}} ||{{yes|Available}} ||{{No|Discontinued}} ||{{No|Discontinued}} ||{{No|Discontinued}} ||{{No|Discontinued}} ||{{yes|Available}} ||{{No|Discontinued}} ||{{No|Discontinued}} ||{{No|Discontinued}} ||{{yes|Available}} ||{{yes|Available}} ||{{yes|Available}} |
|---|
| Life cycle
|2011 - 2013 ||2016 Dec.- ||2011 - 2014 ||2016 Dec.- ||2017- ||2010 - 2013 ||2012- ||2014- ||2015- ||2015- ||2010 - 2013 ||2012- ||2018- ||2020- ||2014- ||2018- |
| SoC
|BCM7413 ||BCM7444S ||BCM7413 ||BCM7252S ||BCM7252S ||BCM7325 ||BCM7356 ||BCM7429 ||BCM7429 ||BCM7376 ||BCM7335 ||BCM7424 ||BCM7278 ||BCM7444S ||BCM7362 ||BCM72604 |
| CPU type
|MIPS ||ARM ||MIPS ||ARM ||ARM ||MIPS ||MIPS ||MIPS ||MIPS ||ARM ||MIPS ||MIPS ||ARM ||ARM ||MIPS ||ARM |
| CPU (MHz)
|2x400 ||4x1500 ||2x400 ||2x1700 ||2×1700 ||333* ||2x1300 ||2x1300 ||2x1300 ||2x1500 ||400 ||2x1300 ||4x2100 ||4x1500 ||742 ||2x1500 |
| RAM (MiB)
|512 ||3072 ||512 ||2048 ||2048 ||256 ||1024 ||1024 ||1024 ||2048 ||384 ||2048 ||2048 ||3072 ||512 ||2048 |
| Flash (MiB)
|1024 ||4096 ||128 ||4096 ||4096 ||128 ||256 ||256 ||512 ||4096 ||128 ||1024 ||4096 ||4096 ||256 ||4096 |
| Flash type
|NAND ||eMMC ||NAND ||eMMC ||eMMC ||NAND ||NAND ||NAND ||NAND ||eMMC ||NAND ||NAND ||eMMC ||eMMC ||NAND ||eMMC |
| Default OS
|Enigma2 || ||Enigma2 || |Enigma2 ||Enigma2 ||Enigma2 ||Enigma2 ||Enigma2 ||Enigma2 ||Enigma2 ||Enigma2 ||Enigma2 ||Enigma2 ||Enigma2 ||Enigma2 |
| DVB
|3 ×P&P(S2/C/T) ||2xP&P Dual FBC DVB-S2 or |
| HDTV
|{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} |
| UHDTV
|{{na}} ||{{yes|4K}} || {{na}} ||{{yes|4K}} ||{{yes|4K}} || {{na}} ||{{na}} ||{{na}} ||{{na}} ||{{yes|4K}} ||{{na}} || {{na}} ||{{ya}} ||{{ya}} ||{{na}} ||{{yes|4K}} |
| 3D TV
|{{ya}} || ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} || ||{{ya}} ||{{ya}} |
| PiP
|{{ya}} ||{{yes|Yes/HD}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{na}} ||{{yes|Yes/HD}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{yes|Yes/HD}} ||{{ya}} || ||{{na}} ||{{na}} |
| Common Interface
|{{yes|2}} ||{{yes|2}} ||{{yes|2}} ||{{yes|1}} ||{{yes|1}} ||{{yes|2}} ||{{yes|1}} ||{{yes|1}} ||{{yes|1}} ||{{yes|1}} ||{{yes|2}} ||{{yes|2}} ||{{yes|2}} ||{{yes|2}} ||{{no|0}} ||{{yes|1}} |
| Smart card
|{{yes|2}} ||{{yes|2}} ||{{yes|2}} ||{{yes|1}} ||{{yes|1}} ||{{yes|1}} ||{{yes|2}} ||{{yes|1}} ||{{yes|1}} ||{{yes|2}} ||{{yes|2}} ||{{yes|2}} ||{{yes|1}} ||{{yes|1}} ||{{yes|1}} ||{{yes|1}} |
| USB
|{{yes|3 x 2.0}} ||{{yes|2x3.0 + 1x2.0}} ||{{yes|3 x 2.0}} ||{{yes|2 x 3.0}} ||{{yes|2 x 3.0}} ||{{yes|2 x 2.0}} ||{{yes|3 x 2.0}} ||{{yes|2 x 2.0}} ||{{yes|2 x 2.0}} ||{{yes|2x3.0 + 1x2.0}} ||{{yes|3 x 2.0}} ||{{yes|3 x 2.0}} ||{{yes|2x3.0 (back) + 1x2.0 (front)}} ||{{yes|2x3.0 (back) + 1x2.0 (front)}} ||{{yes|2 x 2.0}} ||{{yes|1 x 2.0}} |
| RS-232
|{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{yes|RJ11}} ||{{ya}} ||{{ya}} ||{{ya}}*** ||{{ya}}*** ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} ||{{ya}} (RJ11) ||{{ya}} ||{{ya}} |
| LAN (Mbit/s)
|{{yes|100}} ||{{yes|1000 + WIFI N/AC 2.5/5 + BT 4.0}} ||{{yes|100}} ||{{yes|1000}} ||{{yes|1000}} ||{{yes|100}} ||{{yes|1000}} ||{{yes|100}} ||{{yes|100}} ||{{yes|1000}} ||{{yes|100}} ||{{yes|1000 + WIFI-N}} ||{{yes|1000 + WIFI N/AC 2.5/5 + BT 4.0}} ||{{yes|1000 + WIFI B/G/N/AC 2.5/5 + BT 4.0}} ||{{yes|100}} ||{{yes|100}} |
| HDD
|{{yes|2.5/3.5"}} ||{{yes|2.5/3.5"}} ||{{yes|2.5/3.5"}} ||{{na}} ||{{yes|2.5" Detachable}} ||{{na}} ||{{yes|2.5"}} ||{{na}} ||{{na}} ||{{yes|2.5" Detachable}} ||{{yes|3.5"}} ||{{yes|2.5/3.5"}} ||{{yes|2.5" Detachable}} ||{{yes|2.5" Detachable}} ||{{na}} ||{{na}} |
| ATA
|{{yes|SATA II}} || ||{{yes|SATA II}} ||{{na}} |{{na}} ||{{na}} ||{{yes|SATA III}} ||{{na}} ||{{na}} ||{{yes|SATA III}} ||{{yes|SATA II}} ||{{yes|SATA III }} ||{{yes|SATA III}} || ||{{na}} ||{{na}} |
| eSATA
|{{ya}} ||{{na}} ||{{ya}} ||{{na}} | -||{{na}} ||{{na}} ||{{ya}} ||{{ya}} ||{{na}} ||{{ya}} ||{{ya}} ||{{na}} ||{{na}} ||{{na}} ||{{na}} |
| SCART
|{{yes|1}} ||{{na}} ||{{yes|1}} ||{{na}} |{{na}}||{{yes|1}} ||{{yes|1}} ||{{na}} ||{{na}} ||{{na}} ||{{yes|2}} ||{{yes|1}} ||{{na}} ||{{na}} ||{{na}} ||{{na}} |
| HDMI
|{{yes|1.4}} ||{{yes|2.0 OUT/IN}} ||{{yes|1.4}} ||{{yes|2.0}} ||{{yes|1 x (2.0) IN 1 x (2.0) OUT}} ||{{yes|1.4}} ||{{yes|1.4}} ||{{yes|1.4}} ||{{yes|1.4}} ||{{yes|2.0}} ||{{yes|1.4}} ||{{yes|1.4}} ||{{yes|2.0 OUT/IN}} ||{{yes|1 x (2.0) IN 1 x (2.0) OUT}} ||{{yes|1.4}} ||{{yes|2.0}} |
| Display
|{{yes|graphical VFD}} ||{{yes|LCD (4.0")}} ||{{yes|VFD}} ||{{no|Status LED}} ||{{yes|LCD (3.5" 240 x 400)}} ||{{na}} ||{{yes|VFD}} ||{{no|Status LED}} ||{{no|Status LED}} ||{{yes|LCD (3.5")}} ||{{yes|VFD}} ||{{yes|LCD/VFD}} ||{{yes|LCD (3.5")}} ||{{yes|TFT (3.5"- MiniTV)}} ||{{no|Status LED}} ||{{no|Status LED}} |
| LNB pass-thru
|{{ya}} ||{{na}} ||{{ya}} ||{{na}} ||{{na}} ||{{na}} ||{{na}} ||{{ya}} ||{{ya}} ||{{na}} ||{{na}} ||{{na}} ||{{na}} ||{{na}} ||{{na}} ||{{na}} |
| Other connectors
|1 x YPrPb || || || ||Digital Audio: S/PDIF||1 x YPrPb || || || || ||1 x YPrPb ||1 x YPrPb || ||Digital Audio: S/PDIF ||Remote IR ||Remote IR |
| Dimensions, WxHxD (mm)
|380 x 60 x 290 ||380 x 70 x 278 ||340 x 60 x 272 ||230 x 41 x 170 ||280 x 50 x 222 ||280 x 50 x 200 ||280 x 50 x 200 ||211 x 45 x 185 ||211 x 45 x 185 ||315 x 65 x 255 ||380 x 60 x 280 ||380 x 60 x 290 ||310x60x241 ||310 x 68 x 255 ||160 x 30 x 145 ||140 x 50 x 115 |
- Note that Vu+ Uno and Vu+ Ultimo have a dual core processor BCM7413.
- * in most cases Solo is underclocked to 220.67MHz{{cite web | url=http://www.vuplus-support.org/wbb3/index.php?page=Thread&threadID=7429 | title=VU Solo and BCM7325 specifications }}
- *** in Solo SE standard 9-pin D-sub connector is changed to 6-pin RJ11
= Triple tuner =
- Vu+ Ultimo (3 x pluggable DVB-S2 or DVB-T, T2/C tuners)
- Vu+ Ultimo 4K (2 x pluggable FBC DVB-S/S2 tuner or dual FBC DVB-C tuner and 1 x p&p DVB-S2 or DVB-T/C tuners)
= Twin tuner =
- Vu+ Duo 4K (2 x p&p slot for dual FBC DVB-S/S2X tuner, dual DVB-T2 tuner, dual FBC DVB-C tuner)
- Vu+ Solo 4K (2 fixed DVB-S/S2 tuner and 1 x pluggable DVB-S2 or DVB-T/C tuners)
- Vu+ Duo2 (2 x p&p DVB-S2 or DVB-T/C tuners)
- Vu+ Solo2 (2 x fixed DVB-S/S2 tuners)
- Vu+ Duo (2 x fixed DVB-S/S2 tuners)
- Vu+ Uno Twin (1 p&p DVB-S2 Twin tuner)
= Single Tuner =
- Vu+ Solo (1 fixed DVB-S/S2 tuner)
- Vu+ Solo SE (1 p&p DVB-S2 or DVB-T/C tuner)
- Vu+ Solo SE v2 (1 p&p DVB-S2 or DVB-T/C tuner)
- Vu+ Uno (1 p&p DVB-S2 or DVB-T/C tuner)
- Vu+ Uno 4k (1 p&p FBC DVB-S2 tuner or FBC DVB-C tuner)
- Vu+ Uno 4k SE (1 p&p Dusl FBC DVB-S2 or FBC DVB-C or Dual DVB-T2 Tuner)
- Vu+ Zero (1 fixed DVB-S/S2 tuner)
- Vu+ Zero SE (1 fixed DVB-S/S2 tuner)
- Vu+ Zero 4k (1 fixed Single DVB-S2X tuner or Single DVB C/T2 Tuner)
XBMC4STB project by Vu+
In September 2011, at "Vu+ Day", in Amsterdam, it was publicly announced that the generation of Vu+ DVB satellite receivers to be released publicly in the end of 2012 would be ARM-powered and use XBMC Media Center (now renamed to Kodi Entertainment System) software for its main GUI, an OpenEmbedded-based development-project that they call "XBMC4STB" (XBMC for Set-Top-Boxes), with beta releases of both the software and new hardware said to be made available to XBMC developers before they will be released to the public.
{{cite web
| url = http://www.vuplus-community.net/board/threads/vu-day-in-amsterdam.3197/
| title = Vu+ Day in Amsterdam – VUplus XBMC
| publisher = Vuplus-community.net
| access-date = 17 October 2011
}}
However it took two more years before a native source port of XBMC was available on the newer Vu+ (VuPlus) based set-top box models SoloSe, Solo2, and Duo2, all of which are MIPS instead ARM based. XBMC will not be made available for older Vu+ set-top boxes due to hardware limitations with missing OpenGL graphics acceleration.http://www.satnigmo.com/2787/xbmc-kodi-vu-coming-soon/ XBMC (Kodi) for Vu+ coming soon!http://www.cnx-software.com/2015/01/17/linux-based-vu-dvb-set-top-boxes-now-support-xbmckodi/ Linux based Vu+ DVB Set-top Boxes Now Support XBMC/Kodi
=Open Black Hole=
"Open Black Hole" is an open source project for making unofficial third-party OpenPLi based images for newer Vu+ set-top boxes. Using the XBMC4STB software fork of Kodi/XBMC from Vu+, the images are designed as a hybrid integration between Kodi/XBMC media center software and Dreambox's Enigma2 PVR software scripts, forked from OpenPLi (based on OpenEmbedded Linux operating system for embedded systems), it is as such also fully compatible with PLi plugins and coding infrastructure. The project was first announced on 25 May 2015 and is maintained by the Black Hole Team, a team of independent developers of long popular community driven firmware images for Vu+-based set top-boxes, however these Open Black Hole project images are completely separate from the original Black Hole image for Vu+.http://git.vuplus-community.net/ Open Black Hole git source code repositoryhttps://www.facebook.com/BlackHoleTeam Black Hole Team {{User-generated source|certain=yes|date=March 2022}}http://www.prismcube-community.net PrismCube-Community.Net
See also
References
{{Reflist}}
External links
= Official =
- [http://vuplus.com/ Vu+ home page]
= Image =
- [https://www.vuplus-community.net Open/Black Hole image]
- [http://www.openpli.org OpenPLi image]
- [http://www.vuplus-support.org/wbb4 VTI image]
- [http://www.vuplus-support.co.uk VIX image]
- [https://www.opena.tv/downloads/16-vu-plus-images/ OpenATV image]
- [https://www.openvision.tech Open Vision image]
{{Linux devices}}
{{Home theater PC (application software)}}
Category:Television technology