Williams JPH1
{{Infobox racing car
| name = Williams JPH1
| Image = Henry Surtees.jpg
| Image_size =
| Caption =Henry Surtees driving at the 2009 Brands Hatch Formula Two round.
| Category =
| Constructor =
| Designer = Williams Grand Prix Engineering
| Homologation =
| Production =
| Predecessor =
| Successor =
| Team =
| Drivers =
| Technical ref = {{cite news|title=The Williams JPH1 FIA Formula Two car|url=http://www.formulatwo.com/news/williams-jph1.aspx|publisher=MotorSport Vision|work=FormulaTwo.com|date=2009-03-02|access-date=2010-01-06|archive-url=https://web.archive.org/web/20090519074054/http://www.formulatwo.com/news/williams-jph1.aspx|archive-date=2009-05-19|url-status=dead}}
| Chassis =
| Suspension =
| Front suspension =
| Rear suspension =
| Length =
| Width =
| Height =
| Wheelbase = {{convert|2885|mm|1|abbr=on}}
| Track =
| Engine name = Audi 1.8-litre 4cyl 20v Turbo
| Capacity =
| Configuration =
| Turbo/NA =
| Engine position =
| Gearbox name =
| Gears =
| Transmission type = 6-speed Hewland TMT sequential paddle shift transaxle with LSD and hydraulic actuation{{cite news|title=F2 gearbox in production|url=http://www.formulatwo.com/news/f2-gearbox-in-production.aspx|publisher=MotorSport Vision|work=FormulaTwo.com|date=2008-11-11|access-date=2010-01-07|archive-date=2009-01-06|archive-url=https://web.archive.org/web/20090106113651/http://www.formulatwo.com/news/f2-gearbox-in-production.aspx|url-status=dead}}
| Differential =
| Battery =
| Power =
| Torque =
| Weight = {{convert|570|kg|0|abbr=on}} (dry weight)
| Fuel =
| Lubricants =
| Brakes =
| Tyres =
| Tires =
| Clutch =
| Competition =
| Debut = {{Nowrap|2009 Valencia Formula Two round}}
| First_win =
| Last_win =
| Last_event = 2012 Monza Formula Two round
| Entries =
| Races = 66
| Wins = 66
| Podiums =
| Poles =
| Fastest_laps = 66
| Titles =
| Cons_champ =
| Drivers_champ = 3
| Teams_champ = 3
}}
The Williams JPH1 is an open-wheel racing car developed by British manufacturer Williams for use in the FIA Formula Two Championship.
Design
= History =
The car was presented on 2 March 2009 in Fawkham (Great Britain, Kent) at the Brands Hatch track, where on the same day Steven Kane - BTCC driver drove it on the track for the first time.{{Cite web|title=Formula Two car launched at Brands Hatch|url=https://au.motorsport.com/f1/news/formula-two-car-unveiled-at-brands-hatch/2872567/|access-date=29 August 2024|website=Motorsport.com}}
=Chassis=
Named after both Jonathan Palmer and Patrick Head, the Williams JPH1 chassis and survival cell is of carbon fibre composite monocoque construction.
=Powertrain=
The internal combustion engine is a new turbocharged petrol engine based on the Audi 1.8-litre 20 valve block and head,{{cite news|title=FIA picks Palmer as F2 supplier|url=http://www.grandprix.com/ns/ns20779.html|publisher=Inside F1, Inc.|work=GrandPrix.com|date=2008-09-15|access-date=2010-01-06}}{{cite news|title=Palmer's MSV wins F2 contract |url=http://www.itv-f1.com/news_article.aspx?id=43986 |publisher=ITV Sport |work=ITV-F1.com |date=2008-09-15 |access-date=2010-01-06 |url-status=dead |archive-url=https://web.archive.org/web/20090724155452/http://www.itv-f1.com/news_article.aspx?id=43986 |archive-date=2009-07-24 }}{{cite news|title=F2 production engines ready for installation|url=http://www.formulatwo.com/news/f2-production-engines-ready-for-installation.aspx|publisher=MotorSport Vision|work=FormulaTwo.com|date=2009-03-02|access-date=2010-01-06|archive-date=2009-05-22|archive-url=https://web.archive.org/web/20090522062604/http://formulatwo.com/news/f2-production-engines-ready-for-installation.aspx|url-status=dead}} as used in Formula Palmer Audi. Whereas the engine in the FPA car primarily uses standard road car components, the Audi F2 engine has been developed as a pure race engine. Prepared and built by Mountune Racing, the crankshaft, connecting rods, pistons, valves and camshafts are all-new components designed for high strength and light weight. The dry sump system has been re-designed so the engine sits {{convert|35|mm|1}} lower than in the FPA car.
The turbocharger is an all new Garrett GT35 unit featuring roller bearings for improved response, with an external wastegate with high speed closed loop pneumatic valve boost control for absolutely precise automatic boost control. The engine management system is a Pi Research Pectel electronic engine control unit (ECU), the MQ12, which has more capability than the unit in FPA.
For its initial 2009 season, continuous maximum engine power was {{convert|400|bhp|kW PS|0|lk=in}} at 8,250 rpm. The F2 car features a "push to pass/defend" overboost, with {{convert|450|bhp|kW PS|0}} being available for a maximum duration of 6 seconds, available ten times during each race. From 2010, continuous base power was increased to {{convert|425|bhp|kW PS|0}}, with an even higher gain from overboost to {{convert|480|bhp|kW PS|0}}.
The transmission is a new unit designed by Hewland specifically for Formula Two, the TMT. It has six forward speeds, and is operated by steering wheel mounted paddle shifters.
Williams JPH1B
File:Dean stoneman.jpg driving at the 2010 Oschersleben Formula Two round.]]
The car was quite substantially upgraded by both Williams and MotorSport Vision for the 2010 season. The new model came to be called the Williams JPH1B.
Aerodynamic changes were the main thing made to this version. This meant that the car's maximum downforce increased by 30 percent and the aerodynamic efficiency increased by 24 percent. The aerodynamics package, with front and rear wings, was also updated, among other things to make the air flow better under the car. It also meant that there were more downforce levels to experiment with for drivers and engineers. They also increased the size of the front tires and started using a softer rubber compound, to get better grip and better performance. An upgraded differential provided better stability into and through curves. The water system was changed to improve cooling. Compared to a Formula 3 car's 794 kilograms of downforce at 241 km/h, the JPH1B is over 907 kilograms.{{Cite web|title=Williams JPH1B|url=http://www.formulatwo.com/2011-williams-jph1b---technical-focus.aspx|access-date=29 August 2024|website=FormulaTwo.com|archive-url=https://web.archive.org/web/20110603151541/http://www.formulatwo.com/2011-williams-jph1b---technical-focus.aspx |archive-date=2011-06-03 }}
Engine power had been increased from 400 bhp to 425. When using "push-to-pass" engine power was now 480 bhp. This was increased even more for the 2011 season. Now instead you get 500bhp at "push-to-pass", which is 75 more than in standard mode.
Both versions used a Hewland six-speed semi-automatic sequential gearbox, which is regulated using paddles behind the steering wheel.{{Cite web|title=The F2 Car|url=http://www.formulatwo.com/2011-technical/f2carthef2car.aspx|access-date=29 August 2024|website=FormulaTwo.com|archive-url=https://web.archive.org/web/20110603151537/http://www.formulatwo.com/2011-technical/f2carthef2car.aspx |archive-date=2011-06-03 }}