alcohol oxidation

{{Short description|Chemical reaction}}

Alcohol oxidation is a collection of oxidation reactions in organic chemistry that convert alcohols to aldehydes, ketones, carboxylic acids, and esters. The reaction mainly applies to primary and secondary alcohols. Secondary alcohols form ketones, while primary alcohols form aldehydes or carboxylic acids.Burton, George et al. (2000). Salters Advanced Chemistry: Chemical (2nd ed.). Heinemann. {{ISBN|0-435-63120-9}}

A variety of oxidants can be used. Image:Alcohol to aldehyde to acid.png

Almost all industrial scale oxidations use oxygen or air as the oxidant.{{cite book |doi=10.1002/14356007.a18_261.pub2 |chapter=Oxidation |title=Ullmann's Encyclopedia of Industrial Chemistry |date=2015 |last1=Teles |first1=J. Henrique |last2=Hermans |first2=Ive |last3=Franz |first3=Gerhard |last4=Sheldon |first4=Roger A. |pages=1–103 |isbn=978-3-527-30385-4 }}

Through a variety of mechanisms, the removal of a hydride equivalent converts a primary or secondary alcohol to an aldehyde or ketone, respectively. The oxidation of primary alcohols to carboxylic acids normally proceeds via the corresponding aldehyde, which is transformed via an aldehyde hydrate (gem-diol, R-CH(OH)2) by reaction with water. Thus, the oxidation of a primary alcohol at the aldehyde level without further oxidation to the carboxylic acid is possible by performing the reaction in absence of water, so that no aldehyde hydrate can be formed.

Image:Alcohol to aldehyde or ketone.svg

To aldehydes and ketones

=In industry=

The largest operations involve methanol and ethanol to formaldehyde and acetaldehyde, which are produced on million ton scale annually. Both processes use O2 as the oxidant. Methanol oxidation employs a molybdenum oxide-based catalyst. Other large scale aldehydes and ketones are produced by autoxidation or hydrocarbons: benzaldehyde from toluene, acrolein from propylene, acetone from cumene, cyclohexanone from cyclohexanol.

=Laboratory=

In teaching laboratories and small scale operations, many reagents have been developed for the oxidation secondary alcohols to ketones and primary alcohols to aldehydes. Allylic and benzylic alcohols are especially prone to oxidation. Aldehydes are susceptible to over oxidation to carboxylic acids.

== Chromium(VI) reagents==

File:Alcohol_oxidation_to_carbonyls.svg

Chromium(VI) reagents are commonly used for these oxidations.

One family of Cr(VI) reagents employs the complex CrO3(pyridine)2.{{cite book |doi=10.1007/0-387-25725-X_1|chapter=Chromium-based Reagents|title=Oxidation of Alcohols to Aldehydes and Ketones|series=Basic Reactions in Organic Synthesis|year=2006|pages=1–95|isbn=0-387-23607-4}}

  • Sarett's reagent: a solution of CrO3(pyridine)2 in pyridine. It was popularized for selective oxidation of primary and secondary alcohols to carbonyl compounds.
  • Collins reagent is a solution of the same CrO3(pyridine)2 but in dichloromethane. The Ratcliffe variant of Collins reagent relates to details of the preparation of this solution, i.e., the addition of chromium trioxide to a solution of pyridine in methylene chloride.{{cite journal | author = J. C. Collins, W.W. Hess | title = Aldehydes from Primary Alcohols by Oxidation with Chromium Trioxide: Heptanal | journal = Organic Syntheses | volume = 52 | pages = 5 | doi = 10.15227/orgsyn.052.0005 | year = 1972| doi-access = free }}

A second family of Cr(VI) reagents are salts, featuring the pyridinium cation (C5H5NH+).

These salts are less reactive, more easily handled, and more selective than Collins reagent in oxidations of alcohols.

The above reagents represent improvements over the older Jones reagent, a solution of chromium trioxide in aqueous sulfuric acid.

== Swern oxidation ==

Swern oxidation uses oxalyl chloride, dimethylsulfoxide, and an organic base, such as triethylamine.

Image:Swern Oxidation Scheme.png

The by-products are dimethyl sulfide (Me2S), carbon monoxide (CO), carbon dioxide (CO2) and – when triethylamine is used as base – triethylammonium chloride (C6H15NHCl).

The related N-tert-Butylbenzenesulfinimidoyl chloride combines both the sulfur(IV), the base, and the activating Lewis acid in one molecule.

== Oppenauer oxidation ==

{{Main|Oppenauer oxidation}}

center

This seldom-used method interconverts alcohols and carbonyls.

==Niche methods==

Ley oxidation uses NMO as the stoichiometric oxidant with tetrapropylammonium perruthenate as a catalyst.

Fétizon oxidation, also a seldom-used method, uses silver carbonate supported on Celite. This reagent operates through single electron oxidation by the silver cations.

center

Another method is the oxoammonium-catalyzed oxidation. TEMPO exhibits a strong, pH-dependent selectivity for either primary or secondary alcohols; but the effect is primarily steric and other N-oxides behave differently.

Additionally, sodium hypochlorite (or household bleach) in acetone has been reported for efficient conversion of secondary alcohols in the presence of primary alcohols (Stevens oxidation).{{Cite journal | doi=10.1021/jo01298a066| title=Convenient and inexpensive procedure for oxidation of secondary alcohols to ketones| journal=Journal of Organic Chemistry| volume=45| issue=10| pages=2030–2032| year=1980| vauthors = Stevens R, Chapman KT, Weller HN }}

Soluble transition metal complexes catalyze the oxidation of alcohols by presence of dioxygen or another terminal oxidant.{{Cite journal|last=Parmeggiani|first=Camilla|last2=Cardona|first2=Francesca|date=2012-01-03|title=Transition metal based catalysts in the aerobic oxidation of alcohols|url=https://pubs.rsc.org/en/content/articlelanding/2012/gc/c2gc16344f|journal=Green Chemistry|language=en|volume=14|issue=3|pages=547–564|doi=10.1039/C2GC16344F|issn=1463-9270|url-access=subscription}}

Oxidation of diols

File:Oxidative breakage of 1,2-diol (cropped).png

The largest scale oxidation of 1,2-diols gives glyoxal from ethylene glycol. The conversion uses air or sometimes nitric acid.

In the laboratory, vicinal diols suffer oxidative breakage at a carbon-carbon bond with some oxidants such as sodium periodate (NaIO4), (diacetoxyiodo)benzene (PhI(OAc)2){{cite journal | vauthors = Nicolaou KC, Adsool VA, Hale CR | title = An expedient procedure for the oxidative cleavage of olefinic bonds with PhI(OAc)2, NMO, and catalytic OsO4 | journal = Organic Letters | volume = 12 | issue = 7 | pages = 1552–5 | date = April 2010 | pmid = 20192259 | pmc = 2848477 | doi = 10.1021/ol100290a }} or lead tetraacetate (Pb(OAc)4), resulting in generation of two carbonyl groups. The reaction is also known as glycol cleavage.

To carboxylic acids

=In industry=

The oxidation of primary alcohols to carboxylic acids can be carried out using a variety of reagents, but O2/air and nitric acid dominate as the oxidants on a commercial scale. Large scale oxidations of this type are used for the conversion of cyclohexanol alone or as a mixture with cyclohexanone to adipic acid. Similarly cyclododecanol is converted to the 12-carbon dicarboxylic acid. 3,5,5-Trimethylcyclohexanol is similarly oxidized to trimethyladipic acid.

Many specialty reagents have been developed for laboratory scale oxidations of alcohols to carboxylic acids.

=Potassium permanganate=

Potassium permanganate (KMnO4) oxidizes primary alcohols to carboxylic acids very efficiently. This reaction, which was first described in detail by Fournier,{{cite journal | author = Fournier, H.M. | title = Transformation des alcools primaires saturès en acides monobasiques correspondants | journal = C. R. Acad. Sci. | year = 1907 | pages = 331}}{{cite journal | author = Fournier, H.M. | title = Sur la préparation des acides gras et de leurs anhydres | journal = Bull. Soc. Chim. Fr. | date = 20 July 1909 | pages = 920 | url = https://gallica.bnf.fr/ark:/12148/bpt6k5510407r/f1114.item}} is typically carried out by adding KMnO4 to a solution or suspension of the alcohol in an alkaline aqueous solution. For the reaction to proceed efficiently, the alcohol must be at least partially dissolved in the aqueous solution. This can be facilitated by the addition of an organic co-solvent such as dioxane, pyridine, acetone or t-BuOH. KMnO4 reacts with many functional groups, such as secondary alcohols, 1,2-diols, aldehydes, alkenes, oximes, sulfides and thiols, and carbon-carbon double bonds. Thus, selectivity is an issue.

Image:Oxidation with KMnO4.png | year = 1989 | volume = 30 | pages = 3027 | doi = 10.1016/S0040-4039(00)99393-6 | title = Synthesis of a model depsipeptide segment of Luzopeptins (BBM 928), potent antitumor and antiretroviral antibiotics | issue = 23}} oxidized a primary alcohol to carboxylic acid with KMnO4 in aqueous NaOH during the obtention of a rare amino acid derivative needed for the preparation of antibiotics isolated from Actinomadura luzonensis, a microorganism found in a soil sample collected in Luzon island in the Philippines]]

=Jones oxidation=

{{Main|Jones oxidation}}

The so-called Jones reagent, prepared from chromium trioxide (CrO3) and aqueous sulfuric acid, oxidizes alcohols to a carboxylic acid. The protocol frequently affords substantial amounts of esters.{{cite book |doi=10.1007/0-387-25725-X_1|chapter=Chromium-based Reagents|title=Oxidation of Alcohols to Aldehydes and Ketones|series=Basic Reactions in Organic Synthesis|year=2006|pages=1–95|isbn=0-387-23607-4}} Problems are the toxicity and environmental unfriendliness of the reagent. Catalytic variant, involving treatment with excess of periodic acid (H5IO6) have been described.{{cite journal | title = Practical Asymmetric Synthesis of an Endothelin Receptor Antagonist |author1=Song, Z.J. |author2=Zhao, M. |author3=Desmond, R. |author4=Devine, P. |author5=Tschaen, D.M. |author6=Tillyer, R. |author7=Frey, L. |author8=Heid, R. |author9=Xu, F. |author10=Foster, B. |author11=Li, J. |author12=Reamer, R. |author13=Volante, R. |author14=Grabowski, E.J.J. |author15=Dolling, U.H. |author16=Reider, P.J. | journal = J. Org. Chem. | year = 1999 | volume = 64 | pages = 9658 | doi = 10.1021/jo991292t | issue = 26}}

Image:Zhao`s oxidation.png | pages = 4936–7 | volume = 128 | doi = 10.1021/ja057686l | year = 2006 | pmid = 16608311 | issue = 15 | pmc = 2546575}}]]

=Two-step oxidation of alcohols to acids via isolated aldehydes=

As a lot of the aforementioned conditions for the oxidations of primary alcohols to acids are harsh and not compatible with common protection groups, organic chemists often use a two-step procedure for the oxidation to acids.

The alcohol is oxidized to an aldehyde using one of the many procedures above. This sequence is often used in natural product synthesis as in their synthesis of platencin.{{cite journal |author1=Nicolaou K.C. |author2=Scott Tria G. |author3=Edmonds D. J. |journal=Angew. Chem. | year=2008 | volume=120 | pages=1804 | doi=10.1002/ange.200800066 | title=Total Synthesis of Platencin |issue=9}}

=Niche methods and reagents=

Ruthenium tetroxide is an aggressive, seldom-used agent that allows mild reaction conditions.

Heyns oxidation.{{cite book |author1=Marcos Fernández |author2=Gabriel Tojo |title=Oxidation of Primary Alcohols to Carboxylic Acids: A Guide to Current Common Practice (Basic Reactions in Organic Synthesis) |publisher=Springer |location=Berlin |year=2006 |isbn=0-387-35431-X }}

The use of chlorites as terminal oxidants in conjunction with both hypochlorites and TEMPO gives carboxylic acids without chlorination side products.Song, Z. J.; Zhao, M.; Desmond, R.; Devine, P.; Tschaen, D. M.; Tillyer, R.; Frey, L.; Heid, R.; Xu, F.; Foster, B.; Li, J.; Reamer, R.; Volante, R.; Grabowski, E. J. J.; Dolling, U. H.; Reider, P. J.; Okada, S.; Kato, Y.; Mano, E. J. Org. Chem. 1999, 64, 9658. The reaction is usually carried out in two steps in the same pot: partial oxidation is effected with TEMPO and hypochlorite, then chlorite is added to complete the oxidation. Only primary alcohol oxidation is observed. In conjunction with Sharpless dihydroxylation, this method can be used to generate enantiopure α-hydroxy acids.Sharpless, K. B.; Amberg, W.; Bennani, Y. L.; Crispino, G. A.; Hartung, J.; Jeong, K. S.; Kwong, H. L.; Morikawa, K.; Wang, Z. M.; Xu, D.; Zhang, X. L. J. Org. Chem. 1992, 57, 2768.

The Pinnick oxidation uses sodium chlorite.{{cite journal

|author1=Bal B.S. |author2=Childers, Jr. W.E. |author3=Pinnick H.W. | title=Oxidation of α,β-unsaturated aldehydes

| journal=Tetrahedron

| volume=37

| pages=2091

| date=1981

| type=abstract

| issue=11

| doi=10.1016/S0040-4020(01)97963-3

}}

References