bolection
File:San Pietro a Grignano 06.jpg
A bolection is a decorative moulding which projects beyond the face of a panel or frame in raised panel walls, doors, and fireplaces. It is commonly used when the meeting surfaces are at different levels, especially to hold floating panels in place while allowing them to expand and contract with changes in temperature and humidity.
Also sometimes called balection or bilection, the term is of uncertain etymology and was first used in the early 18th century.The OED states that the first use was in 1708 by E. Hatton in his New View London: "A Gallery..the front of which is large Bolection, with raised Pannels." Bolection was used to great effect by Christopher Wren.{{where|date=November 2015}}{{cite book |title=Everyman's Concise Encyclopedia of Architecture |last=Briggs |first=Martin S. |year=1962 |publisher=JM Dent & Sons |location=London |page=51 }}
Bolection mouldings are usually rabbeted on their underside to the depth of the lower element, but attached to the upper (when panels are allowed to float) or both (when merely decorative).
Bolection mouldings were also regularly used in the 16th and 17th century for picture frames. On frames of this type, the highest point of the moulding is close to the sight edge (the inner edge of the frame which meets the picture), from which the profile descends towards its lowest point at its outer edge. Such frames are sometimes described as bolection frames but more often as "reverse profile" frames.
{{clear}}