direct-buried cable
{{Short description|Ruggedized utility cable for direct burial}}
File:Direct-buried cable (en).svg
Direct-buried cable (DBC) is a kind of communications or transmissions electrical cable which is especially designed to be buried under the ground without any other cover, sheath, or duct to protect it.{{cite book|author=Sterling, Donald J.|title=Premises Cabling|year=2000|publisher=Thomson Delmar Learning|isbn=0-7668-1735-0}}
Most direct-buried cable is built to specific tolerances to heat, moisture, conductivity, and soil acidity. Unlike standard telecommunications and power cables, which have only a thin layer of insulation and a waterproof outer cover, DBC consists of multiple layers of heavy metallic-banded sheathing, reinforced by heavy rubber covers, shock absorbing gel, wrapped thread-fortified waterproof tape, and stiffened by a heavy metal core.
DBC is preferable in some areas since it is more resistant to being the focus of lightning discharges.{{cite book|author=Rakov, Vladimir A.|author2=Uman, Martin A.|title=Lightning: physics and effects|year=2003|publisher=Cambridge University Press|isbn=0-521-58327-6}}
Communications
Most cable of this kind is coaxial or bundled fiber-optic cable. In the 20th century much of it was filled cable. Direct-buried cable is cheaper and easier to lay than other kinds of cable that require protection from the earth. However, DBC is also easily cut during digging or other excavations. As a result, most direct-buried cable is found on side roads, not main thoroughfares.{{cite book|first=John|last=Highhouse|title=A Guide for Telecommunications Cable Splicing|year=1997|publisher=Thomson Delmar Learning|isbn=0-8273-8066-6}}
Power
Some power cabling is also direct-buried. This kind of cabling must follow strict regulatory procedures regarding installation Salata F., De Lieto Vollaro A., De Lieto Vollaro R. [http://thermalscience.vinca.rs/online-first/1129 A model for the evaluation of heat loss from underground cables in non-uniform soil to optimize the system design.] Thermal Science, DOI REFERENCE: [http://www.doiserbia.nb.rs/Article.aspx?ID=0354-98361300119S#.Uz2H9oXRUu0 10.2298/TSCI120528119S] and backfilling. This is usually used for undergrounding in areas where overhead cabling is impractical or dangerous.
See also
References
{{reflist}}
External links
- [http://csmedia.corning.com/opcomm/Resource_Documents/SRPs_rl/005-012.pdf Guide to direct buried cabling procedures]