hierarchical matrix

In numerical mathematics, hierarchical matrices (H-matrices){{cite journal|last=Hackbusch|first=Wolfgang|date=1999|title=A sparse matrix arithmetic based on H-matrices. Part I: Introduction to H-matrices|journal=Computing|volume=62|issue=2|pages=89–108|doi=10.1007/s006070050015|s2cid=24294140 }}{{cite journal|last1=Grasedyck|first1=Lars|last2=Hackbusch|first2=Wolfgang|date=2003|title=Construction and arithmetics of H-matrices|journal=Computing|volume=70|issue=4|pages=295–334|doi=10.1007/s00607-003-0019-1}}{{cite book|last=Hackbusch|first=Wolfgang|date=2015|title=Hierarchical matrices: Algorithms and Analysis|volume=49|publisher=Springer|doi=10.1007/978-3-662-47324-5|series=Springer Series in Computational Mathematics|isbn=978-3-662-47323-8}}

are used as data-sparse approximations of non-sparse matrices. While a sparse matrix of dimension $n$ can be represented efficiently in $O(n)$ units of storage by storing only its non-zero entries, a non-sparse matrix would require $O(n^2)$ units of storage, and using this type of matrices for large problems would therefore be prohibitively expensive in terms of storage and computing time. Hierarchical matrices provide an approximation requiring only $O(n k\,\log(n))$ units of storage, where $k$ is a parameter controlling the accuracy of the approximation. In typical applications, e.g., when discretizing integral equations,{{cite book|last=Bebendorf|first=Mario|date=2008|title=Hierarchical matrices: A means to efficiently solve elliptic boundary value problems|publisher=Springer}}{{cite journal|last1=Hackbusch|first1=Wolfgang|last2=Khoromskij|first2=Boris N.|date=2000|title=A sparse H-Matrix Arithmetic. Part II: Application to Multi-Dimensional Problems|journal=Computing|volume=64|pages=21–47|doi=10.1007/PL00021408 }}{{cite journal|last=Bebendorf|first=Mario|title=Approximation of boundary element matrices|date=2000|journal=Numer. Math.|volume=86|issue=4|pages=565–589|doi=10.1007/pl00005410|s2cid=206858339 }}{{cite journal|last1=Bebendorf|first1=Mario|last2=Rjasanow|first2=Sergej|date=2003|title=Adaptive low-rank approximation of collocation matrices|journal=Computing|volume=70|pages=1–24|doi=10.1007/s00607-002-1469-6|citeseerx=10.1.1.133.182|s2cid=16501661 }}{{cite journal|last1=Börm|first1=Steffen|last2=Grasedyck|first2=Lars|date=2005|title=Hybrid cross approximation of integral operators|journal=Numer. Math.|volume=101|issue=2|pages=221–249|doi=10.1007/s00211-005-0618-1|citeseerx=10.1.1.330.8950|s2cid=263882011 }}{{cite journal|last1=Börm|first1=Steffen|last2=Christophersen|first2=Sven|date=2016|title=Approximation of integral operators by Green quadrature and nested cross approximation|journal=Numer. Math.|volume=133|issue=3|pages=409–442|doi=10.1007/s00211-015-0757-y|arxiv=1404.2234|s2cid=253745725 }}

preconditioning the resulting systems of linear equations,{{cite journal|last1=Faustmann|first1=Markus|last2=Melenk|first2=J. Markus|last3=Praetorius|first3=Dirk|date=2016|title=Existence of H-matrix approximants to the inverses of BEM matrices: The simple-layer operator|journal=Math. Comp.|volume=85|issue=297|pages=119–152|doi=10.1090/mcom/2990|arxiv=1311.5028|s2cid=10706786 }}

or solving elliptic partial differential equations,{{cite journal|last1=Bebendorf|first1=Mario|last2=Hackbusch|first2=Wolfgang|date=2003|title=Existence of H-matrix approximants to the inverse FE-matrix of elliptic operators with $L^\infty$ -coefficients|journal=Numer. Math.|volume=95|pages=1–28|doi=10.1007/s00211-002-0445-6|s2cid=263876883 }}{{cite journal|last=Börm|first=Steffen|date=2010|title=Approximation of solution operators of elliptic partial differential equations by H- and H²-matrices|journal=Numer. Math.|volume=115|issue=2|pages=165–193|doi=10.1007/s00211-009-0278-7|s2cid=7737211 }}{{cite journal|last1=Faustmann|first1=Markus|last2=Melenk|first2=J. Markus|last3=Praetorius|first3=Dirk|date=2015|title=H-matrix approximability of the inverses of FEM matrices|journal=Numer. Math.|volume=131|issue=4|pages=615–642|doi=10.1007/s00211-015-0706-9|arxiv=1308.0499|s2cid=2619823 }}{{cite journal|last1=Shen|first1=Jie|last2=Wang|first2=Yingwei|last3=Xia|first3=Jianlin|date=2016|title=Fast structured direct spectral methods for differential equations with variable coefficients|journal= SIAM Journal on Scientific Computing|volume=38|issue=1|pages=A28–A54|doi=10.1137/140986815}} a rank proportional to $\log(1/\epsilon)^\gamma$ with a small constant $\gamma$ is sufficient to ensure an accuracy of $\epsilon$ . Compared to many other data-sparse representations of non-sparse matrices, hierarchical matrices offer a major advantage: the results of matrix arithmetic operations like matrix multiplication, factorization or inversion can be approximated in $O(n k^\alpha\,\log(n)^\beta)$ operations, where $\alpha,\beta\in\{1,2,3\}.$

Basic idea

Hierarchical matrices rely on local low-rank approximations:

let $I,J$ be index sets, and let $G\in{\mathbb R}^{I\times J}$ denote the matrix we have to approximate.

In many applications (see above), we can find subsets $t\subseteq I,s\subseteq J$ such that $G|_{t\times s}$

can be approximated by a rank- $k$ matrix. This approximation can be represented in factorized form $G|_{t\times s}\approx A B^*$ with factors

$A\in{\mathbb R}^{t\times k},B\in{\mathbb R}^{s\times k}$ .

While the standard representation of the matrix $G|_{t\times s}$ requires $O((\#t)(\#s))$ units of storage,

the factorized representation requires only $O(k(\#t+\#s))$ units. If $k$ is not too large, the storage requirements are reduced significantly.

In order to approximate the entire matrix $G$ , it is split into a family of submatrices. Large submatrices are stored in factorized representation, while small submatrices are stored in standard representation in order to improve efficiency.

Low-rank matrices are closely related to degenerate expansions used in panel clustering and the fast multipole method

to approximate integral operators. In this sense, hierarchical matrices can be considered the algebraic counterparts of these techniques.

Application to integral operators

Hierarchical matrices are successfully used to treat integral equations, e.g., the single and double layer potential operators

appearing in the boundary element method. A typical operator has the form

: ${\mathcal G}[u](x) = \int_\Omega \kappa(x,y) u(y) \,dy.$

The Galerkin method leads to matrix entries of the form

: $g_{ij} = \int_\Omega \int_\Omega \kappa(x,y) \varphi_i(x) \psi_j(y) \,dy\,dx,$

where $(\varphi_i)_{i\in I}$ and $(\psi_j)_{j\in J}$ are families of finite element basis functions.

If the kernel function $\kappa$ is sufficiently smooth, we can approximate it by polynomial interpolation to obtain

: $\tilde\kappa(x,y) = \sum_{\nu=1}^k \kappa(x,\xi_\nu) \ell_\nu(y),$

where $(\xi_\nu)_{\nu=1}^k$ is the family of interpolation points and $(\ell_\nu)_{\nu=1}^k$

is the corresponding family of Lagrange polynomials.

Replacing $\kappa$ by $\tilde\kappa$ yields an approximation

: $\tilde g_{ij} = \int_\Omega \int_\Omega \tilde\kappa(x,y) \varphi_i(x) \psi_j(y) \,dy\,dx
= \sum_{\nu=1}^k \int_\Omega \kappa(x,\xi_\nu) \varphi_i(x) \,dx
\int_\Omega \ell_\nu(y) \psi_j(y) \,dy
= \sum_{\nu=1}^k a_{i\nu} b_{j\nu}$

with the coefficients

: $a_{i\nu} = \int_\Omega \kappa(x,\xi_\nu) \varphi_i(x) \,dx,$

: $b_{j\nu} = \int_\Omega \ell_\nu(y) \psi_j(y) \,dy.$

If we choose $t\subseteq I,s\subseteq J$ and use the same interpolation points for all $i\in t,j\in s$ , we obtain

$G|_{t\times s} \approx A B^*$ .

Obviously, any other approximation separating the variables $x$ and $y$ , e.g., the multipole expansion,

would also allow us to split the double integral into two single integrals and thus arrive at a similar factorized low-rank matrix.

Of particular interest are cross approximation techniques{{cite journal|last=Tyrtyshnikov|first=Eugene|date=2000|title=Incomplete cross approximation in the mosaic-skeleton method|journal=Computing|volume=64|issue=4|pages=367–380|doi=10.1007/s006070070031|citeseerx=10.1.1.100.6153|s2cid=15850058 }}

that use only the entries of the original matrix $G$ to construct a low-rank approximation.

Application to elliptic partial differential equations

Since the solution operator of an elliptic partial differential equation can be expressed as an integral operator involving

Green's function, it is not surprising that the inverse of the stiffness matrix arising from the finite element method

and spectral method can be approximated by a hierarchical matrix.

Green's function depends on the shape of the computational domain, therefore it is usually not known. Nevertheless, approximate arithmetic operations can be employed to compute an approximate inverse without knowing the

function explicitly.

Surprisingly, it is possible to prove that the inverse can be approximated even if the differential operator involves non-smooth coefficients and Green's function is therefore not smooth.

Arithmetic operations

The most important innovation of the hierarchical matrix method is the development of efficient algorithms for performing (approximate) matrix arithmetic operations on non-sparse matrices, e.g., to compute approximate inverses, LU decompositions and solutions to matrix equations.

The central algorithm is the efficient matrix-matrix multiplication, i.e., the computation of $Z = Z + \alpha X Y$

for hierarchical matrices $X,Y,Z$ and a scalar factor $\alpha$ .

The algorithm requires the submatrices of the hierarchical matrices to be organized in a block tree structure and takes advantage of the properties of factorized low-rank matrices to compute the updated $Z$ in

$O(n k^2\,\log(n)^2)$ operations.

Taking advantage of the block structure, the inverse can be computed by using recursion to compute inverses and Schur complements of diagonal blocks and combining both using the matrix-matrix multiplication. In a similar way, the LU decomposition{{cite journal|last=Bebendorf|first=Mario|date=2007|title=Why finite element discretizations can be factored by triangular hierarchical matrices|journal=SIAM J. Numer. Anal.|volume=45|issue=4|pages=1472–1494|doi=10.1137/060669747}}{{cite journal|last1=Grasedyck|first1=Lars|last2=Kriemann|first2=Ronald|last3=Le Borne|first3=Sabine|date=2009|title=Domain decomposition based H-LU preconditioning|journal=Numer. Math.|volume=112|issue=4|pages=565–600|doi=10.1007/s00211-009-0218-6|doi-access=free}}

can be constructed using only recursion and multiplication.

Both operations also require $O(n k^2\,\log(n)^2)$ operations.

H<sup>2</sup>-matrices

In order to treat very large problems, the structure of hierarchical matrices can be improved:

H²-matrices{{cite book|last1=Hackbusch|first1=Wolfgang|last2=Khoromskij|first2=Boris N.|last3=Sauter|first3=Stefan|title=Lectures on Applied Mathematics |chapter=On H 2-Matrices |date=2002|pages=9–29|doi=10.1007/978-3-642-59709-1_2|isbn=978-3-642-64094-0}}{{cite book|last=Börm|first=Steffen|date=2010|title=Efficient Numerical Methods for Non-local Operators: H²-Matrix Compression, Algorithms and Analysis|publisher=EMS Tracts in Mathematics|url=http://www.ems-ph.org/books/book.php?proj_nr=125|isbn=9783037190913}}

replace the general low-rank structure of the blocks by a hierarchical representation closely related to the fast multipole method in order to reduce the storage complexity to $O(n k)$ .

In the context of boundary integral operators, replacing the fixed rank $k$ by block-dependent ranks leads to approximations that preserve the rate of convergence of the underlying boundary element method at a complexity of $O(n).$ {{cite journal|last=Sauter|first=Stefan|date=2000|title=Variable order panel clustering|journal=Computing|volume=64|issue=3|pages=223–261|doi=10.1007/s006070050045|s2cid=36813444 }}{{cite journal|last1=Börm|first1=Steffen|last2=Sauter|first2=Stefan|date=2005|title=BEM with linear complexity for the classical boundary integral operators|journal=Math. Comp.|volume=74|issue=251|pages=1139–1177|doi=10.1090/s0025-5718-04-01733-8|doi-access=free}}

Arithmetic operations like multiplication, inversion, and Cholesky or LR factorization of H²-matrices

can be implemented based on two fundamental operations: the matrix-vector multiplication with submatrices

and the low-rank update of submatrices. While the matrix-vector multiplication is straightforward, implementing efficient low-rank updates with adaptively optimized cluster bases poses a significant challenge.{{cite journal|last1=Börm|first1=Steffen|last2=Reimer|first2=Knut|date=2015|title=Efficient arithmetic operations for rank-structured matrices based on hierarchical low-rank updates|journal=Computing and Visualization in Science|volume=16|issue=6|pages=247–258|arxiv=1402.5056|doi=10.1007/s00791-015-0233-3|s2cid=36931036 }}

Literature

Software

[http://www.hlib.org HLib] is a C software library implementing the most important algorithms for hierarchical and ${\mathcal H}^2$ -matrices.

[https://www.wr.uni-bayreuth.de/en/software/ahmed AHMED] is a C++ software library that can be downloaded for educational purposes.

[http://www.hlibpro.com HLIBpro] is an implementation of the core hierarchical matrix algorithms for commercial applications.

[http://www.h2lib.org H2Lib] is an open source implementation of hierarchical matrix algorithms intended for research and teaching.

[https://github.com/gchavez2/awesome-hierarchical-matrices awesome-hierarchical-matrices] is a repository containing a list of other H-Matrices implementations.

[https://github.com/JuliaMatrices/HierarchicalMatrices.jl HierarchicalMatrices.jl] is a Julia package implementing hierarchical matrices.

Category:Matrices (mathematics)