hinge

Ancient remains of stone, marble, wood, and bronze hinges have been found. Some date back to at least Ancient Egypt, although it is nearly impossible to pinpoint exactly where and when the first hinges were used.{{cite web|title=Door Hinges in Antiquity (Smith's Dictionary, 1875)|url=https://penelope.uchicago.edu/Thayer/E/Roman/Texts/secondary/SMIGRA*/Cardo.html|access-date=April 19, 2022}}

In Ancient Rome, hinges were called cardō and gave name to the goddess Cardea and the main street Cardo. This name cardō lives on figuratively today as "the chief thing (on which something turns or depends)" in words such as cardinal.{{cite web|title=Door Hinges in Antiquity (Smith's Dictionary, 1875)|url=https://penelope.uchicago.edu/Thayer/E/Roman/Texts/secondary/SMIGRA*/Cardo.html|access-date=April 19, 2022}}

According to the Oxford English Dictionary, the English word hinge is related to hang.{{Cite web |date= |title=hinge |url=https://www.oed.com/dictionary/hinge_n |access-date=20 December 2024 |website=Oxford English Dictionary}}

File:Basic hinge.svg

; Barrel hinge: A barrel hinge consists of a sectional barrel (the knuckle) secured by a pivot. A barrel is simply a hollow cylinder. The vast majority of hinges operate on the barrel principle.{{Cite web |last=Childers |first=Kathleen |date=25 August 2023 |title=Everything to Know About Barrel Hinges |url=https://www.familyhandyman.com/article/everything-to-know-about-barrel-hinges/ |access-date=20 December 2024 |website=Family Handyman}}

; Butt hinge / Mortise hinge: Any hinge designed to be set into a door frame and/or door is considered a butt hinge or mortise hinge. A hinge can also be made as a half-mortise, where only one half is mortised and the other is not. Most mortise hinges are also barrel hinges because of how they pivot (i.e., a pair of leaves secured to each other by knuckles through which runs a pin).{{Cite web |date=16 December 2021 |title=What Is a Butt Hinge? The Basics of Butt Hinges and How They Work |url=https://monroeengineering.com/blog/what-is-a-butt-hinge-the-basics-of-butt-hinges-and-how-they-work/ |access-date=20 December 2024 |website=Monroe Engineering}}

; Butterfly / Parliament (UK) hinge: A decorative variety of barrel hinge with leaves somewhat resembling the wings of a butterfly.

; Case hinge: Similar to butt hinges, but usually more decorative; most commonly used in suitcases, briefcases, and the like.

;Concealed hinge: Used for furniture doors (with or without a self-closing features and/or damping systems), they consist of two parts: (1.) the cup and arm, and (2.) the mounting plate. They are also called "cup hinges", or "Euro hinges", as they were developed in Europe and use metric installation standards. Most concealed hinges offer the advantage of full in situ adjustability for standoff distance from the cabinet face, as well as pitch and roll by means of two screws on each hinge.

; Continuous / Piano hinge: This variety of barrel hinge runs the entire length of a door, panel, box, etc. They are manufactured with or without holes.

; Flag hinge: A simple two-part hinge, where a single leaf, attached to a pin, is inserted into a leaf with a hole. This allows the hinged objects to be easily removed (such as removable doors). They are made in right- and left-hand configurations.{{Cite web |date=26 August 2024 |title=The Beginner's Guide to Flag Hinges |url=https://monroeengineering.com/blog/the-beginners-guide-to-flag-hinges/ |access-date=20 December 2024 |website=Monroe Engineering}}

;H hinge: These H-shaped barrel hinges are used on flush-mounted doors. Small H hinges ({{convert|3|–|4|in|mm|abbr=on|disp=or}}) tend to be used for cabinets, while larger ones ({{convert|6|–|7|in|mm|abbr=on|disp=or}}) are for passage doors and closet doors.

; HL hinge: Commonly used for passage doors, room doors, and closet doors in the 17th, 18th, and the 19th centuries. On taller doors, H hinges were occasionally used between them.

; Pivot hinge: This hinge pivots in openings in the floor and the top of the door frame. Also referred to as double-acting floor hinges, they are found in ancient dry stone buildings and, rarely, in old wooden buildings. They are a low-cost alternative for use with lightweight doors.{{cite web|title=Pivot Hinges|url=http://www.guden.com/ItemDisplay/PivotHinges|website=Guden|access-date=15 December 2016}} Doors with these hinges may be called haar-hung doors.

; Self-closing hinge: This is a spring-loaded hinge with a speed control function. The same as spring hinge, usually use spring to provide force to close the door and provide a mechanical or hydraulic damper to control door close speed. That can prevent door slamming problem while auto closes a door.{{cite web|title=Self-Closing Hinges|url=http://www.watersonusa.com/solutions/spring-loaded-door-hinge|website=Watersonusa|date=26 August 2019 |access-date=September 3, 2020}}

;Spring hinge: A spring-loaded hinge that provides assistance in closing or opening the hinge leaves. An inner spring applies force to keep the hinge closed or opened.{{cite web|title=Spring Hinges|url=http://www.guden.com/ItemDisplay/Spring-Hinges|website=Guden|access-date=15 December 2016}}

;Swing Clear hinge: Also called offset door hinges, they are ideal for residential and commercial doors, they allow doors to swing completely clear of their openings.{{Cite web |last=Greene |first=Lori |date=27 May 2021 |title=QQ: Hinge Types – Swing-Clear |url=https://idighardware.com/2021/05/qq-hinge-types-swing-clear/ |access-date=20 December 2024 |website=iDigHardware}} They can easily comply with Fair Housing Act (FHA) code by providing a minimum [https://watersonusa.com/solutions/swing-away-hinges ADA 32” clearance] when using a 34” door slab.{{Cite web |last= |first= |date= |title=The Fair Housing Act's Requirement 3: Usable Doors |url=https://www.hud.gov/sites/dfiles/FHEO/documents/The-Fair-Housing-Act-Requirement-3-Usable-Doors-Participant-Workbook.pdf |access-date=20 December 2024 |website=United States Department of Housing and Urban Development}}

;Living hinge: A hinge of flexible plastic that creates a join between two objects without any knuckles or pins. Molded as a single piece, they never rust or squeak, and have several other advantages over other hinges, but are more susceptible to breakage.{{Cite web |date=21 March 2024 |title=What is a living hinge and its applications? |url=https://www.essentracomponents.com/en-gb/news/solutions/access-hardware/living-hinges-101-what-you-need-to-know |access-date=20 December 2024 |website=Essentra Components}}

Other types of hinges include:

• Coach
• Counter Flap
• Cranked or storm-proof
• Double action non-spring
• Double action spring
• Flush
• Friction
• Lift-off
• Pinge (with a quick-release pin)
• Rising butt
• Security
• Tee

Since at least medieval times, there have been hinges to draw bridges for defensive purposes for fortified buildings. Hinges are used in contemporary architecture where building settlement can be expected over the life of the building. For example, the Dakin Building in Brisbane, California, was designed with its entrance ramp on a large hinge to allow settlement of the building built on piles over bay mud. This device was effective until October 2006, when it was replaced due to damage and excessive ramp slope.

Hinges appear in large structures such as elevated freeway and railroad viaducts, to reduce or eliminate the transfer of bending stresses between structural components, typically in an effort to reduce sensitivity to earthquakes. The primary reason for using a hinge, rather than a simpler device such as a slide, is to prevent the separation of adjacent components. When no bending stresses are transmitted across the hinge, it is called a zero moment hinge.

A variety of self-actuating, self-locking hinges have been developed for spacecraft deployable structures such as solar array panels, synthetic aperture radar antennas, booms, radiators, etc.

Alan M. Watt; and Sergio Pellegrino.

[http://www-civ.eng.cam.ac.uk/dsl/publications/TSR_hinge.pdf "Tape-Spring Rolling Hinges"]

p. 2.

;Pin: The rod that holds the leaves together, inside the knuckle. Also known as a pintle.

;Knuckle: The hollow—typically circular—portion creating the joint of the hinge through which the pin is set. The knuckles of either leaf typically alternate and interlock with the pin passing through all of them. (aka. loop, joint, node or curl)

;Leaf: The portions (typically two) that extend laterally from the knuckle and typically revolve around the pin.

; End play: Axial movement between the leaves along the axis of the pin. This motion allows the leaves to rotate without binding and is determined by the typical distance between knuckles (knuckle gap) when both edges of the leaves are aligned.

; Gauge: Thickness of the leaves.

;Hinge width: Length from the outer edge of one leaf to the outer edge of the other leaf, perpendicularly across the pin (aka open width).

; Hinge length: The length of the leaves parallel to the pin.

; Knuckle length: The typical length of an individual knuckle parallel to the pin.

; Leaf width: Length from the center of the pin to the outer edge of the leaf.

; Pitch: Distance from the end of a knuckle to the same edge of its adjacent knuckle on the same leaf

; Door Stop: A colloquialism referring to loose angular movement of the leaves relative to the pin.{{cite web|url=https://www.youtube.com/watch?v=Yy9Di5FWp6c |archive-url=https://ghostarchive.org/varchive/youtube/20211212/Yy9Di5FWp6c| archive-date=2021-12-12 |url-status=live|title=Jeep JK tail gate hinge slop|last=heyok|date=28 April 2014|via=YouTube}}{{cbignore}}

;Butler tray hinge: Folds to 90 degrees and also snaps flat. They are for tables that have a tray top for serving.

;Card table hinge: Mortised into edge of antique or reproduction card tables and allow the top to fold onto itself.

;Carpentier joint: A hinge consisting of several thin metal strips of curved cross section.

;Drop-leaf table hinge: Mounted under the surface of a table with leaves that drop down. They are most commonly used with rule joints.

;Hinged expansion joint: an expansion joint with hinges that allow the unit to bend in a single plane

;Hinged handcuffs: a restraint device designed to secure an individual's wrists in proximity to each other consisting of two cuffs linked with a double or triple hinge. Hinged handcuffs cuffs tend to restrict movement more than chain-linked handcuffs, and they can be used to generate more leverage to force a suspect's hands behind the back, or to apply pain against the wrist, forcing the subject to comply and stop resisting.{{cite web|url=https://www.tactical-life.com/lifestyle/tactics/lifesaving-handcuffing-tactics/|title=On the Job: Lifesaving Handcuffing Tactics|date=30 December 2014}}

;Hinge region: portion of antibody structure between the fragment antigen-binding region and the fragment crystallizable region

;Living hinge: a hinge consisting of material that flexes

;Piano hinge: (or coffin hinge) a long hinge, originally used for piano lids, but now used in many other applications where a long hinge is needed.

File:HingesOldA.jpg|Old construction of hinges in the dry stone wall near Bignasco.

File:HingesOldB.jpg|Ancient pivot hinges, found in the dry stone buildings.

File:Hingebifold.JPG|A flushed door hinge.

File:Hinge2P2.jpg|A barrel hinge made of wrought iron.

File:Hinge2P3.jpg|A barrel hinge made of bronze strap.

File:Hinge3P.jpg|Increasing the number of loops to 3 allows the butt hinge axis to be fixed from both ends.

File:Topfscharnier.jpg|Door in furniture with spring to lock door both fully shut and fully open positions. It hides completely behind the door and has adjustment for fine alignment. Allows the door to open even when against a wall.

File:Hinge 01.jpg|Rusty hinges on a building exterior.

File:Drzwi biegun 0211.jpg|This door hinges on the stile and is called a haar-hung door.

File:Mint box polypropylene lid.JPG|A living hinge on the lid of a Tic Tac box.

File:Hinged Handcuffs 1.jpg|Hinged handcuffs

File:Hinge 03.jpg|A piano hinge.

File:Continuoushinge.jpg|A continuous hinge.

file:Waterson_K51SW.jpg | Swing Clear Hinge

File:Sydney Harbour Bridge hinge.jpg|Hinge on the Sydney Harbour Bridge. It was used during construction of the bridge and now accommodates thermal expansion and contraction of the bridge

• Hinge bender, a tool for adjusting hinges
• {{annotated link|Concealed hinge jig}}
• {{annotated link|Floating hinge}}
• {{annotated link|Geared continuous hinge}}
• {{annotated link|Plain bearing}}
• Hinge joint, a skeletal bone joint functioning like a hinge

{{Reflist}}

{{Sister project links|commonscat=yes|n=no|q=no|s=no}}

• [http://www.hingecraft.com/Terminology.html Hinge Terminology]—Hingecraft; graphics visualizing many terms
• [http://www.guden.com/Control/glossary Guden Hinges and Industrial Hardware: Glossary]

{{Authority control}}

Category:Hardware (mechanical)

Category:Door furniture

Category:Linkages (mechanical)