target strength

{{short description|Measure of the reflection coefficient of a sonar target}}

The target strength or acoustic size is a measure of the area of a sonar target. This is usually quantified as a number of decibels. For fish such as salmon, the target size varies with the length of the fish and a 5 cm fish could have a target strength of about -50 dB.{{citation |chapter-url=https://books.google.com/books?id=tAP3zn0TtkkC&pg=PA161 |title=Underwater Acoustic Data Processing |chapter=A review of target estimation techniques |author=J.E. Ehrenberg |publisher=Springer |year=1989|isbn=9780792301271 }}

The target strength of a fish also depends on the orientation of the fish at the moment of sonification, which in turn changes the scattering cross-section of the fish and any air-filled cavities of the fish. The effect of this means that behavioral reaction affects observed biomass, for example fish evading the research vessel at night due to strong lights and vibrations from the hull and machinery. Target strength is often observed on or near a specific frequency where the target is most resonant. Narrowband (CW) pulses has historically been used, but there is ongoing research into using wideband (FM) pulses for improved classification.{{Cite journal |last1=Dunning |first1=James |last2=Jansen |first2=Teunis |last3=Fenwick |first3=Alan J. |last4=Fernandes |first4=Paul G. |date=2023-05-01 |title=A new in-situ method to estimate fish target strength reveals high variability in broadband measurements |url=https://www.sciencedirect.com/science/article/pii/S0165783623000048 |journal=Fisheries Research |volume=261 |pages=106611 |doi=10.1016/j.fishres.2023.106611 |bibcode=2023FishR.26106611D |issn=0165-7836|hdl=2164/19854 |hdl-access=free }}{{Cite journal |last1=McCartney |first1=B. S. |last2=Stubbs |first2=A. R. |date=1971-04-08 |title=Measurements of the acoustic target strengths of fish in dorsal aspect, including swimbladder resonance |url=https://dx.doi.org/10.1016/0022-460X%2871%2990433-0 |journal=Journal of Sound and Vibration |volume=15 |issue=3 |pages=397–420 |doi=10.1016/0022-460X(71)90433-0 |bibcode=1971JSV....15..397M |issn=0022-460X|url-access=subscription }}

Formula

For some simple shapes, target strength can be derived mathematically. For other objects like fish, where the size of the air bladder is the main factor, target strength is commonly derived empirically.

Target strength (TS) is referenced to 1 meter from the acoustic center of the target, assuming isotropic reflection:{{Cite book |last=Waite |first=Ashley David |title=Sonar for practising engineers |date=2005 |publisher=Wiley |isbn=978-0-471-49750-9 |edition=3. ed., repr. with corr |location=Chichester}}{{Cite book |last=Caruthers |first=Jerald W. |url=https://openlibrary.org/books/OL4537915M/Fundamentals_of_marine_acoustics |title=Fundamentals of marine acoustics |date=1977 |publisher=Elsevier Scientific Pub. Co. |isbn=978-0-444-41552-3 |location=Amsterdam, New York, New York|ol=4537915M }}

$TS=10 \cdot \log \left ( \frac{I_r}{I_i} \right ) dB = 10 \cdot \log \left [ \frac{\sigma}{4\pi} \right ] dB$

Where:

$I_r$ is the reflected intensity from target

$I_i$ is the incident intensity on target

$\sigma$ is the backscattering cross-section

Target strength of a sphere with radius $a$ , large compared to the wavelength, assuming reference distance 1 meter:

$\sigma = \pi \cdot a ^ 2$

$TS = 10 \cdot \log \left [ \frac{\sigma}{4\pi} \right ] dB = 10 \cdot \log \left [ \frac{ a ^ 2 }{ 4 } \right ] dB$

Thus, for a sphere of radius 2 meter, the target strength is 0 dB.

NOAA has a calculator{{cite web | url=https://www.fisheries.noaa.gov/data-tools/standard-sphere-target-strength-calculator | title=Standard Sphere Target Strength Calculator | NOAA Fisheries | date=11 January 2024 }} that can be used to inspect the target strength of calibration spheres made out of copper or tungsten carbide in relation to physical parameters found in the ocean.

target strength

Formula

References

Further reading