Allotropes of phosphorus#White phosphorus

{{Main|White phosphorus}}

{{About|the chemistry of white phosphorus|military applications|white phosphorus munitions|section=yes}}

{{Chembox

| Name = White phosphorus

|IUPACName=White phosphorus
Tetraphosphorus

|SystematicName=1,2,3,4-Tetraphosphatricyclo[1.1.0.0^2,4]butane

| OtherNames = {{Unbulleted list

| Molecular phosphorus

| Yellow phosphorus

}}

| ImageFile = Weißer Phosphor.JPG

| ImageCaption = White phosphorus sample with a chunk removed from the corner to expose un-oxidized material

| ImageFile1 = Tetraphosphorus-liquid-2D-dimensions.png

| ImageCaption1 = Tetraphosphorus molecule

| Section1 = {{Chembox Identifiers

| CASNo= 12185-10-3

| CASNo_Ref = {{Cascite|changed|??}}

| ChemSpiderID = 109894

| InChI = 1S/P4/c1-2-3(1)4(1)2

| InChIKey = OBSZRRSYVTXPNB-UHFFFAOYSA-N

| PubChem = 123286

| SMILES = P12P3P1P23

| UNNumber = 1381

}}

| Section2 = {{Chembox Properties

| P=4

| MolarMassRound = 3

| Density = 1.82 g/cm³

| MeltingPtF = 111.4

| BoilingPtF = 536

}}

| Section3 = {{Chembox Hazards

| NFPA-H = 4

| NFPA-F = 4

| NFPA-I = 2

}}

}}

File:White phosphorus.png

White phosphorus, yellow phosphorus or simply tetraphosphorus ({{chem2|P4}}) exists as molecules of four phosphorus atoms in a tetrahedral structure, joined by six phosphorus—phosphorus single bonds.{{Housecroft2nd|page=392}} The free P₄ molecule in the gas phase has a P-P bond length of r_g = 2.1994(3) Å as was determined by gas electron diffraction.{{Cite journal |last=Cossairt |first=Brandi M. |last2=Cummins |first2=Christopher C. |last3=Head |first3=Ashley R. |last4=Lichtenberger |first4=Dennis L. |last5=Berger |first5=Raphael J. F. |last6=Hayes |first6=Stuart A. |last7=Mitzel |first7=Norbert W. |last8=Wu |first8=Gang |date=2010-06-23 |title=On the Molecular and Electronic Structures of AsP 3 and P 4 |url=https://pubs.acs.org/doi/10.1021/ja102580d |journal=Journal of the American Chemical Society |language=en |volume=132 |issue=24 |pages=8459–8465 |doi=10.1021/ja102580d |issn=0002-7863}} Despite the tetrahedral arrangement the P₄ molecules have no significant ring strain and a vapor of P₄ molecules is stable. This is due to the nature of bonding in the P₄ tetrahedron which can be described by spherical aromaticity or cluster bonding, that is the electrons are highly delocalized. This has been illustrated by calculations of the magnetically induced currents, which sum up to 29 nA/T, much more than in the archetypical aromatic molecule benzene (11 nA/T).

Molten and gaseous white phosphorus also retains the tetrahedral molecules, until {{convert|800|C|F K|-2}} when it starts decomposing to {{chem|P|2}} molecules.{{Cite journal|doi=10.1002/cber.19971300911|title=On the Polymorphism of White Phosphorus|date=1997|author=Simon, Arndt|journal=Chemische Berichte|volume=130|pages=1235–1240|last2=Borrmann|first2=Horst|last3=Horakh|first3=Jörg|issue=9}}

White phosphorus is a translucent waxy solid that quickly yellows in light, and impure white phosphorus is for this reason called yellow phosphorus. It is toxic, causing severe liver damage on ingestion and phossy jaw from chronic ingestion or inhalation.

It glows greenish in the dark (when exposed to oxygen). It ignites spontaneously in air at about {{convert|50|C}}, and at much lower temperatures if finely divided (due to melting-point depression). Because of this property, white phosphorus is used as a weapon. Phosphorus reacts with oxygen, usually forming two oxides depending on the amount of available oxygen: {{chem2|P4O6}} (phosphorus trioxide) when reacted with a limited supply of oxygen, and {{chem2|P4O10}} when reacted with excess oxygen. On rare occasions, {{chem2|P4O7}}, {{chem2|P4O8}}, and {{chem2|P4O9}} are also formed, but in small amounts. This combustion gives phosphorus(V) oxide, which consists of {{chem2|P4O10}} tetrahedral with oxygen inserted between the phosphorus atoms and at their vertices:

:{{chem2|P4 + 5 O2 → P4O10}}

The odour of combustion of this form has a characteristic garlic smell. White phosphorus is only slightly soluble in water and can be stored under water. Indeed, white phosphorus is safe from self-igniting when it is submerged in water; due to this, unreacted white phosphorus can prove hazardous to beachcombers who may collect washed-up samples while unaware of their true nature.{{cite web |title=A dangerous guide to beachcombing |url=https://www.chemistryworld.com/news/a-dangerous-guide-to-beachcombing/3008056.article}}{{cite web |title=Woman mistakes WWII-era munition for precious stone on German beach {{pipe}} DW {{pipe}} 05.08.2017 |url=https://www.dw.com/en/woman-mistakes-wwii-era-munition-for-precious-stone-on-german-beach/a-39977702 |website=Deutsche Welle}} {{chem2|P4}} is soluble in benzene, oils, carbon disulfide, and disulfur dichloride.

The white allotrope can be produced using several methods. In the industrial process, phosphate rock is heated in an electric or fuel-fired furnace in the presence of carbon and silica.Threlfall, R.E., (1951). 100 years of Phosphorus Making: 1851–1951. Oldbury: Albright and Wilson Ltd Elemental phosphorus is then liberated as a vapour and can be collected under phosphoric acid. An idealized equation for this carbothermal reaction is shown for calcium phosphate (although phosphate rock contains substantial amounts of fluoroapatite):

: {{chem2|2 Ca3(PO4)2 + 6 SiO2 + 10 C → 6 CaSiO3 + 10 CO + P4}}

Although white phosphorus forms the tetrahedron, the simplest possible Platonic hydrocarbon, no other polyhedral phosphorus clusters are known.{{wikicite|reference=Corbridge, D. E. C. (1995) "Phosphorus: An Outline of its Chemistry, Biochemistry, and Technology" 5th Edition Elsevier: Amsterdam. § 4.1.12. {{ISBN|0-444-89307-5}}.|ref={{harvid|Corbridge|1995}}}} White phosphorus converts to the thermodynamically-stabler red allotrope, but that allotrope is not isolated polyhedra.

Cubane, in particular, is unlikely to form, and the closest approach is the half-phosphorus compound {{chem2|P4(CH)4}}, produced from phosphaalkynes.{{cite journal|doi=10.1002/anie.199504361|title=Phosphaalkyne Cyclooligomers: From Dimers to Hexamers—First Steps on the Way to Phosphorus–Carbon Cage Compounds|year=1995|last1=Streubel|first1=Rainer|journal=Angewandte Chemie International Edition in English|volume=34|pages=436–438|issue=4}} Other clusters are more thermodynamically favorable, and some have been partially formed as components of larger polyelemental compounds.

{{Main|Red phosphorus}}

File:Phosphor rot.jpg

Red phosphorus may be formed by heating white phosphorus to {{convert|300|C|-1}} in the absence of air or by exposing white phosphorus to sunlight. Red phosphorus exists as an amorphous network. Upon further heating, the amorphous red phosphorus crystallizes. It has two crystalline forms: violet phosphorus and fibrous red phosphorus. Bulk red phosphorus does not ignite in air at temperatures below {{convert|240|C|-1}}, whereas pieces of white phosphorus ignite at about {{convert|30|C}}.

Under standard conditions it is more stable than white phosphorus, but less stable than the thermodynamically stable black phosphorus. The standard enthalpy of formation of red phosphorus is −17.6 kJ/mol. Red phosphorus is kinetically most stable.

It was first presented by Anton von Schrötter before the Vienna Academy of Sciences on December 9, 1847, although others had doubtlessly had this substance in their hands before, such as Berzelius.{{cite journal|last=Kohn|first=Moritz|date=1944-11-01|title=The discovery of red phosphorus (1847) by Anton von Schrötter (1802–1875)|url=https://doi.org/10.1021/ed021p522|journal=Journal of Chemical Education|volume=21|issue=11|pages=522|doi=10.1021/ed021p522|bibcode=1944JChEd..21..522K|issn=0021-9584}}

{{See also|Safety match}}

Red phosphorus can be used as a very effective flame retardant, especially in thermoplastics (e.g. polyamide) and thermosets (e.g. epoxy resins or polyurethanes). The flame retarding effect is based on the formation of polyphosphoric acid. Together with the organic polymer material, these acids create a char that prevents the propagation of the flames. The safety risks associated with phosphine generation and friction sensitivity of red phosphorus can be effectively minimized by stabilization and micro-encapsulation. For easier handling, red phosphorus is often used in form of dispersions or masterbatches in various carrier systems. However, for electronic/electrical systems, red phosphorus flame retardant has been effectively banned by major OEMs due to its tendency to induce premature failures.{{cite web |url=http://resources.dfrsolutions.com/Webcasts/2015/Red-Phosphorus-Reliability-Alert.pdf |title=Red Phosphorus Reliability Alert |access-date=2018-01-01 |archive-url=https://web.archive.org/web/20180102013053/http://resources.dfrsolutions.com/Webcasts/2015/Red-Phosphorus-Reliability-Alert.pdf |archive-date=2018-01-02 |url-status=dead }} One persistent problem is that red phosphorus in epoxy molding compounds induces elevated leakage current in semiconductor devices.Craig Hillman, Red Phosphorus Induced Failures in Encapsulated Circuits, https://www.dfrsolutions.com/hubfs/Resources/services/Red-Phosphorus-Induced-Failures-in-Encapsulated-Circuits.pdf?t=1513022462214 Another problem was acceleration of hydrolysis reactions in PBT insulating material.Dock Brown, The Return of the Red Retardant, SMTAI 2015, https://www.dfrsolutions.com/hubfs/Resources/services/The-Return-of-the-Red-Retardant.pdf?t=1513022462214

Red phosphorus can also be used in the illicit production of methamphetamine and Krokodil.

Red phosphorus can be used as an elemental photocatalyst for hydrogen formation from the water.Applied Catalysis B: Environmental, 2012, 111–112, 409–414. They display a steady hydrogen evolution rates of 633 μmol/(h⋅g) by the formation of small-sized fibrous phosphorus.Angewandte Chemie International Edition, 2016, 55, 9580–9585.

File:Phosphor-rot-violett.jpg

File:Violetter Phosphor.svg

File:Hittorf's violet phosphorus.png

Monoclinic phosphorus, violet phosphorus, or Hittorf's metallic phosphorus is a crystalline form of the amorphous red phosphorus.{{cite web|last1=Curry|first1=Roger|title=Hittorf's Metallic Phosphorus of 1865|url=http://lateralscience.blogspot.co.uk/2012/07/main-menu-click-above-p-h-o-s-p-h-o-r-u.html|website=LATERAL SCIENCE|access-date=16 November 2014|date=2012-07-08}}Monoclinic phosphorus formed from vapor in the presence of an alkali metal {{US patent|4620968}} In 1865, Johann Wilhelm Hittorf heated red phosphorus in a sealed tube at 530 °C. The upper part of the tube was kept at 444 °C. Brilliant opaque monoclinic, or rhombohedral, crystals sublimed as a result. Violet phosphorus can also be prepared by dissolving white phosphorus in molten lead in a sealed tube at 500 °C for 18 hours. Upon slow cooling, Hittorf's allotrope crystallises out. The crystals can be revealed by dissolving the lead in dilute nitric acid followed by boiling in concentrated hydrochloric acid.{{cite journal|journal = Annalen der Physik|volume = 202|issue = 10|pages =193–228|year =1865|title = Zur Kenntniss des Phosphors|first = W.|last = Hittorf|doi = 10.1002/andp.18652021002|bibcode = 1865AnP...202..193H |url = https://zenodo.org/record/1423702}} In addition, a fibrous form exists with similar phosphorus cages. The lattice structure of violet phosphorus was presented by Thurn and Krebs in 1969.{{cite journal|last1=Thurn|first1=H.|last2=Krebs|first2=H.|date=1969-01-15|title=Über Struktur und Eigenschaften der Halbmetalle. XXII. Die Kristallstruktur des Hittorfschen Phosphors|journal=Acta Crystallographica Section B|language=de|volume=25|issue=1|pages=125–135|doi=10.1107/S0567740869001853|bibcode=1969AcCrB..25..125T |issn=0567-7408}} Imaginary frequencies, indicating the irrationalities or instabilities of the structure, were obtained for the reported violet structure from 1969.{{cite journal|last1=Zhang|first1=Lihui|last2=Huang|first2=Hongyang|last3=Zhang|first3=Bo|last4=Gu|first4=Mengyue|last5=Zhao|first5=Dan|last6=Zhao|first6=Xuewen|last7=Li|first7=Longren|last8=Zhou|first8=Jun|last9=Wu|first9=Kai|last10=Cheng|first10=Yonghong|last11=Zhang|first11=Jinying|date=2020|title=Structure and Properties of Violet Phosphorus and Its Phosphorene Exfoliation|journal=Angewandte Chemie|language=en|volume=132|issue=3|pages=1090–1096|doi=10.1002/ange.201912761|pmid=31713959|bibcode=2020AngCh.132.1090Z|s2cid=241932000|issn=1521-3757}} The single crystal of violet phosphorus was also produced. The lattice structure of violet phosphorus has been obtained by single-crystal x-ray diffraction to be monoclinic with space group of P2/n (13) (a = 9.210, b = 9.128, c = 21.893 Å, β = 97.776°, [https://www.ccdc.cam.ac.uk/structures/Search?Doi=10.1002%2Fanie.201912761&DatabaseToSearch=Published CSD-1935087]). The optical band gap of the violet phosphorus was measured by diffuse reflectance spectroscopy to be around 1.7 eV. The thermal decomposition temperature was 52 °C higher than its black phosphorus counterpart. The violet phosphorene was easily obtained from both mechanical and solution exfoliation.

Violet phosphorus does not ignite in air until heated to 300 °C and is insoluble in all solvents. It is not attacked by alkali and only slowly reacts with halogens. It can be oxidised by nitric acid to phosphoric acid. Violet phosphorus ignites upon impact in air.{{Cite AV media |url=https://www.youtube.com/watch?v=qH50C5nXC8U |title=Violet violent Phosphorus EXPLODES on impact! |date=2021-12-07 |last=ChemicalForce |access-date=2024-08-12 |via=YouTube}}{{Better source needed|reason=Citation is based on YouTube video, which may not demonstrate professional experimental techniques and results may be unreliable|date=August 2024}}

If it is heated in an atmosphere of inert gas, for example nitrogen or carbon dioxide, it sublimes and the vapour condenses as white phosphorus. If it is heated in a vacuum and the vapour condensed rapidly, violet phosphorus is obtained. It would appear that violet phosphorus is a polymer of high relative molecular mass, which on heating breaks down into {{chem2|P2}} molecules. On cooling, these would normally dimerize to give {{chem2|P4}} molecules (i.e. white phosphorus) but, in a vacuum, they link up again to form the polymeric violet allotrope.

File:Black Phosphorus Ampoule.jpg

File:Black phosphorus.png

File:Schwarzer Phosphor.svg

Black phosphorus is the thermodynamically stable form of phosphorus at room temperature and pressure, with a heat of formation of −39.3 kJ/mol (relative to white phosphorus which is defined as the standard state). It was first synthesized by heating white phosphorus under high pressures (12,000 atmospheres) in 1914. As a 2D material, in appearance, properties, and structure, black phosphorus is very much like graphite with both being black and flaky, a conductor of electricity, and having puckered sheets of linked atoms.{{cite journal|last1=Korolkov|first1=Vladimir V.|last2=Timokhin|first2=Ivan G.|last3=Haubrichs|first3=Rolf|last4=Smith|first4=Emily F.|last5=Yang|first5=Lixu|last6=Yang|first6=Sihai|last7=Champness|first7=Neil R.|last8=Schröder|first8=Martin|last9=Beton|first9=Peter H.|date=2017-11-09|title=Supramolecular networks stabilise and functionalise black phosphorus|journal=Nature Communications|volume=8|issue=1|pages=1385|doi=10.1038/s41467-017-01797-6|pmid=29123112|pmc=5680224|issn=2041-1723|bibcode=2017NatCo...8.1385K}}

Black phosphorus has an orthorhombic pleated honeycomb structure and is the least reactive allotrope, a result of its lattice of interlinked six-membered rings where each atom is bonded to three other atoms.{{cite journal|doi=10.1107/S0365110X65004140|title=Refinement of the crystal structure of black phosphorus|year=1965|last1=Brown|first1=A.|last2=Rundqvist|first2=S.|journal=Acta Crystallographica|volume=19|pages=684–685|issue=4|bibcode=1965AcCry..19..684B }}{{cite journal|doi=10.1063/1.438523|title=Effect of pressure on bonding in black phosphorus|year=1979|last1=Cartz|first1=L.|last2=Srinivasa|first2=S. R.|last3=Riedner|first3=R. J.|last4=Jorgensen|first4=J. D.|last5=Worlton|first5=T. G.|journal=The Journal of Chemical Physics|volume=71|pages=1718|bibcode = 1979JChPh..71.1718C|issue=4 }} In this structure, each phosphorus atom has five outer shell electrons.{{cite journal |last1=Ling |first1=Xi |last2=Wang |first2=Han |last3=Huang |first3=Shengxi |last4=Xia |first4=Fengnian |last5=Dresselhaus |first5=Mildred S. |date=2015-03-27 |title=The renaissance of black phosphorus |journal=Proceedings of the National Academy of Sciences |volume=112 |issue=15 |pages=4523–4530 |doi=10.1073/pnas.1416581112 |issn=0027-8424 |pmc=4403146 |pmid=25820173|arxiv=1503.08367 |bibcode=2015PNAS..112.4523L |doi-access=free }} Black and red phosphorus can also take a cubic crystal lattice structure.{{cite journal|doi=10.1002/pssb.200301569|title=Calculated high pressure crystal structure transformations for phosphorus|year=2003|last1=Ahuja|first1=Rajeev|journal=Physica Status Solidi B|volume=235|pages=282–287|bibcode = 2003PSSBR.235..282A|issue=2 |s2cid=120578034}} The first high-pressure synthesis of black phosphorus crystals was made by the Nobel prize winner Percy Williams Bridgman in 1914.{{cite journal|last=Bridgman|first=P. W.|date=1914-07-01|journal=Journal of the American Chemical Society|volume=36|issue=7|pages=1344–1363|doi=10.1021/ja02184a002|issn=0002-7863|title=Two New Modifications of Phosphorus|url=https://zenodo.org/record/1428993}} Metal salts catalyze the synthesis of black phosphorus.{{cite journal|doi=10.1021/ic062192q|title=Au3SnP7@Black Phosphorus: An Easy Access to Black Phosphorus|year=2007|last1=Lange|first1=Stefan|last2=Schmidt|first2=Peer|last3=Nilges|first3=Tom|journal=Inorganic Chemistry|volume=46|pages=4028–35|pmid=17439206|issue=10}}

Black phosphorus-based sensors exhibit several superior qualities over traditional materials used in piezoelectric or resistive sensors. Characterized by its unique puckered honeycomb lattice structure, black phosphorus provides exceptional carrier mobility. This property ensures its high sensitivity and mechanical resilience, making it an intriguing candidate for sensor technology.{{cite journal |last1=Vaghasiya |first1=Jayraj V. |last2=Mayorga–Martinez |first2=Carmen C. |last3=Vyskočil |first3=Jan |last4=Pumera |first4=Martin |date=2023-01-03 |title=Black phosphorous-based human-machine communication interface |journal=Nature Communications |language=en |volume=14 |issue=1 |pages=2 |doi=10.1038/s41467-022-34482-4 |pmid=36596775 |issn=2041-1723|pmc=9810665 |bibcode=2023NatCo..14....2V }}{{cite web |last1=Chemistry |first1=University of |last2=Prague |first2=Technology |title=Black phosphorus–based human–machine communication interface: A breakthrough in assistive technology |url=https://techxplore.com/news/2023-06-black-phosphorusbased-humanmachine-communication-interface.html |access-date=2023-06-16 |website=techxplore.com |language=en}}

{{main|phosphorene}}

The similarities to graphite also include the possibility of scotch-tape delamination (exfoliation), resulting in phosphorene, a graphene-like 2D material with excellent charge transport properties, thermal transport properties and optical properties. Distinguishing features of scientific interest include a thickness dependent band-gap, which is not found in graphene.{{cite web|url=https://www.ossila.com/products/black-phosphorus|title=Black Phosphorus Powder and Crystals|website=Ossila|access-date=2019-08-23}} This, combined with a high on/off ratio of ~10⁵ makes phosphorene a promising candidate for field-effect transistors (FETs).{{cite journal|last1=Zhang|first1=Yuanbo|last2=Chen|first2=Xian Hui|last3=Feng|first3=Donglai|last4=Wu|first4=Hua|last5=Ou|first5=Xuedong|last6=Ge|first6=Qingqin|last7=Ye|first7=Guo Jun|last8=Yu|first8=Yijun|last9=Li|first9=Likai|date=May 2014|title=Black phosphorus field-effect transistors|journal=Nature Nanotechnology|volume=9|issue=5|pages=372–377|doi=10.1038/nnano.2014.35|pmid=24584274|issn=1748-3395|arxiv=1401.4117|bibcode=2014NatNa...9..372L|s2cid=17218693}} The tunable bandgap also suggests promising applications in mid-infrared photodetectors and LEDs.{{cite journal|last1=Wang|first1=J.|last2=Rousseau|first2=A.|last3=Yang|first3=M.|last4=Low|first4=T.|last5=Francoeur|first5=S.|last6=Kéna-Cohen|first6=S.|title=Mid-infrared Polarized Emission from Black Phosphorus Light-Emitting Diodes|journal=Nano Letters|year=2020|volume=20|issue=5|pages=3651–3655|doi=10.1021/acs.nanolett.0c00581|pmid=32286837|arxiv=1911.09184|bibcode=2020NanoL..20.3651W|s2cid=208202133}}{{cite journal|last1= Smith|first1=B.|last2=Vermeersch|first2=B.|last3=Carrete|first3=J.|last4=Ou|first4=E.|last5=Kim|first5=J.|last6=Li|first6=S.|title=Temperature and Thickness Dependences of the Anisotropic In-Plane Thermal Conductivity of Black Phosphorus|journal=Adv Mater|volume=29|issue=5|pages=1603756|doi=10.1002/adma.201603756|pmid=27882620|year=2017|osti=1533031|s2cid=5479539|doi-access=free|bibcode=2017AdM....2903756S }} Exfoliated black phosphorus sublimes at 400 °C in vacuum.{{cite journal|last1=Liu|first1=Xiaolong D.|last2=Wood|first2=Joshua D.|last3=Chen|first3=Kan-Sheng|last4=Cho|first4=EunKyung|last5=Hersam|first5=Mark C.|title=In Situ Thermal Decomposition of Exfoliated Two-Dimensional Black Phosphorus|journal=Journal of Physical Chemistry Letters|date=9 February 2015|volume=6|issue=5|pages=773–778|doi=10.1021/acs.jpclett.5b00043|pmid=26262651|arxiv=1502.02644|s2cid=24648672}} It gradually oxidizes when exposed to water in the presence of oxygen, which is a concern when contemplating it as a material for the manufacture of transistors, for example.{{cite journal|last1=Wood|first1=Joshua D.|last2=Wells|first2=Spencer A.|last3=Jariwala|first3=Deep|last4=Chen|first4=Kan-Sheng|last5=Cho|first5=EunKyung|last6=Sangwan|first6=Vinod K.|last7=Liu|first7=Xiaolong|last8=Lauhon|first8=Lincoln J.|last9=Marks|first9=Tobin J.|last10=Hersam|first10=Mark C.|title=Effective Passivation of Exfoliated Black Phosphorus Transistors against Ambient Degradation|journal=Nano Letters|date=7 November 2014|volume=14|issue=12|pages=6964–6970|doi=10.1021/nl5032293|arxiv = 1411.2055 |bibcode = 2014NanoL..14.6964W|pmid=25380142|s2cid=22128620}}{{cite journal|title = Atomic and electronic structure of exfoliated black phosphorus|journal = Journal of Vacuum Science & Technology A|date = 2015-11-01|issn = 0734-2101|pages = 060604|volume = 33|issue = 6|doi = 10.1116/1.4926753|first1 = Ryan J.|last1 = Wu|first2 = Mehmet|last2 = Topsakal|first3 = Tony|last3 = Low|first4 = Matthew C.|last4 = Robbins|first5 = Nazila|last5 = Haratipour|first6 = Jong Seok|last6 = Jeong|first7 = Renata M.|author6-link=Renata Wentzcovitch|last7 = Wentzcovitch|first8 = Steven J.|last8 = Koester|first9 = K. Andre|last9 = Mkhoyan|bibcode = 2015JVSTA..33f0604W}} Exfoliated black phosphorus is an emerging anode material in the battery community, showing high stability and lithium storage.{{cite journal |last1=Zheng |first1=Weiran |last2=Lee |first2=Jeongyeon |last3=Gao |first3=Zhi-Wen |last4=Li |first4=Yong |last5=Lin |first5=Shenghuang |last6=Lau |first6=Shu Ping |last7=Lee |first7=Lawrence Yoon Suk |title=Laser-Assisted Ultrafast Exfoliation of Black Phosphorus in Liquid with Tunable Thickness for Li-Ion Batteries |journal=Advanced Energy Materials |date=30 June 2020 |volume=10 |issue=31 |pages=1903490 |doi=10.1002/aenm.201903490|s2cid=225707528 |hdl=10397/100139 |hdl-access=free }}

Ring-shaped phosphorus was theoretically predicted in 2007.{{cite journal |last1=Karttunen |first1=Antti J. |last2=Linnolahti |first2=Mikko |last3=Pakkanen |first3=Tapani A. |title=Icosahedral and Ring-Shaped Allotropes of Phosphorus |journal=Chemistry – A European Journal |date=15 June 2007 |volume=13 |issue=18 |pages=5232–5237 |doi=10.1002/chem.200601572|pmid=17373003 }} The ring-shaped phosphorus was self-assembled inside evacuated multi-walled carbon nanotubes with inner diameters of 5–8 nm using a vapor encapsulation method. A ring with a diameter of 5.30 nm, consisting of 23 {{chem2|P8}} and 23 {{chem2|P2}} units with a total of 230 P atoms, was observed inside a multi-walled carbon nanotube with an inner diameter of 5.90 nm in atomic scale. The distance between neighboring rings is 6.4 Å.{{cite journal |last1=Zhang |first1=Jinying |last2=Zhao |first2=Dan |last3=Xiao |first3=Dingbin |last4=Ma |first4=Chuansheng |last5=Du |first5=Hongchu |last6=Li |first6=Xin |last7=Zhang |first7=Lihui |last8=Huang |first8=Jialiang |last9=Huang |first9=Hongyang |last10=Jia |first10=Chun-Lin |last11=Tománek |first11=David |last12=Niu |first12=Chunming |title=Assembly of Ring-Shaped Phosphorus within Carbon Nanotube Nanoreactors |journal=Angewandte Chemie International Edition |date=6 February 2017 |volume=56 |issue=7 |pages=1850–1854 |doi=10.1002/anie.201611740|pmid=28074606 }}

The Hexaphosphabenzene ring shaped molecule is not stable in isolation.

Single-layer blue phosphorus was first produced in 2016 by the method of molecular beam epitaxy from black phosphorus as precursor.{{cite journal |last1=Zhang |first1=Jia Lin |last2=Zhao |first2=Songtao |date=30 June 2016 |title=Epitaxial Growth of Single Layer Blue Phosphorus: A New Phase of Two-Dimensional Phosphorus |journal=Nano Letters |volume=16 |issue=8 |pages=4903–4908 |doi=10.1021/acs.nanolett.6b01459 |pmid=27359041 |bibcode=2016NanoL..16.4903Z }}

{{main|Diphosphorus}}

File:Diphosphorus-3D-vdW.png

File:Diphosphorus-2D-dimensions.png

The diphosphorus allotrope ({{chem2|P2}}) can normally be obtained only under extreme conditions (for example, from {{chem2|P4}} at 1100 kelvin). In 2006, the diatomic molecule was generated in homogeneous solution under normal conditions with the use of transition metal complexes (for example, tungsten and niobium).{{cite journal|doi = 10.1126/science.1129630|year = 2006|author1=Piro, Na |author2=Figueroa, Js |author3=Mckellar, Jt |author4=Cummins, Cc |title = Triple-bond reactivity of diphosphorus molecules|volume = 313|issue = 5791|pages = 1276–9|pmid = 16946068|journal = Science|bibcode = 2006Sci...313.1276P |s2cid = 27740669}}

Diphosphorus is the gaseous form of phosphorus, and the thermodynamically stable form between 1200 °C and 2000 °C. The dissociation of tetraphosphorus ({{chem2|P4}}) begins at lower temperature: the percentage of {{chem2|P2}} at 800 °C is ≈ 1%. At temperatures above about 2000 °C, the diphosphorus molecule begins to dissociate into atomic phosphorus.

{{chem2|P12}} nanorod polymers were isolated from CuI-P complexes using low temperature treatment.{{cite journal|doi = 10.1002/anie.200460244|date=Aug 2004|author1=Pfitzner, A |author2=Bräu, Mf |author3=Zweck, J |author4=Brunklaus, G |author5=Eckert, H |title = Phosphorus nanorods – two allotropic modifications of a long-known element|volume = 43|issue = 32|pages = 4228–31|pmid = 15307095|journal = Angewandte Chemie International Edition in English|doi-access = free}}

Red/brown phosphorus was shown to be stable in air for several weeks and have properties distinct from those of red phosphorus. Electron microscopy showed that red/brown phosphorus forms long, parallel nanorods with a diameter between 3.4 Å and 4.7 Å.

{{clear}}

• Phossy jaw

{{reflist|30em}}

;White phosphorus

• [http://www.periodicvideos.com/videos/mv_whitephosphorus.htm White Phophorus] at The Periodic Table of Videos (University of Nottingham)
• [http://www.periodicvideos.com/videos/mv_whitephosphorus2.htm More about White Phosphorus (and phosphorus pentoxide)] at The Periodic Table of Videos (University of Nottingham)
• [https://chem.libretexts.org/Bookshelves/General_Chemistry/Map%3A_Chemistry_(Zumdahl_and_Decoste)/18%3A_The_Representative_Elements/18.09%3A_The_Chemistry_of_Phosphorus The Chemistry of Phosphorus] at Chemistry LibreTexts.

Phosphorus

Category:Phosphorus