Department of Engineering, University of Cambridge

Reverend Richard Jackson of Torrington, a former fellow of Trinity College, died in 1782, leaving a substantial portion of his estate to endow a Professorship of Natural Experimental Philosophy, which eventually became the Professorship of Mechanism and Applied Mechanics. This position was first held in 1875 by James Stuart.{{cite web|url=http://www-g.eng.cam.ac.uk/125/noflash/|title=CUED 125 Anniversary|first=Paul Robertson|last=(paul@jenandpaul.co.uk)|access-date=31 March 2017}} The first engineering workshop at Cambridge was constructed in 1878 in a wooden hut measuring fifty by twenty feet built in 1878, which was extended three times along Free School Lane by 1900, serving over 800 students by 1920.

The department now has several sites around Cambridge:

File:Cmglee_Cambridge_University_Engineering_Department_Trumpington_St.jpg

• The main buildings are located at Trumpington Street and Fen Causeway on the Scroope House site, where most of the undergraduate teaching in the Engineering Tripos is carried out. The first building on the site, the Inglis Building (since extended and greatly modified twice) was started in 1920, following a large donation from Sir Dorabji Tata, and by 1932, the department had completely vacated the Free School Lane site.
• The Baker Building was built in front of the Inglis Building and opened by the Duke of Edinburgh, on 13 November 1952. Further wings were added later, the last one in 1965 including a 334 seat lecture theatre. In 1979, student numbers passed 1,000, before a major increase in 1988 when the undergraduate course was extended from three to four years.
• In 2016, the construction of the James Dyson Building was completed in front of the Baker Building, providing additional office space and seminar and meeting rooms for use by the Department.{{Cite web|url=http://teaching.eng.cam.ac.uk/content/james-dyson-building|title=The James Dyson Building {{!}} CUED undergraduate teaching|website=teaching.eng.cam.ac.uk|access-date=2016-07-17|url-status=dead|archive-url=https://web.archive.org/web/20150109082122/http://teaching.eng.cam.ac.uk/content/james-dyson-building|archive-date=2015-01-09}}
• Various sections that could not easily be accommodated on the main site have moved to the university's West Cambridge site, including the Whittle Laboratory (a turbomachinery laboratory founded by Sir John Horlock in 1973),{{cite web|title=The AOUG Sir John Horlock Award for Science|url=http://www.aoug.org.uk/awards/science.html|publisher=Association of Open University Graduates (AOUG)|access-date=14 April 2014|archive-date=10 September 2014|archive-url=https://web.archive.org/web/20140910165827/http://www.aoug.org.uk/awards/science.html|url-status=dead}} the Geotechnical Centrifuge Laboratory, the Microelectronics Research Centre (1992), the Electrical Engineering Division Building, and the Institute for Manufacturing (IfM).
• A few of the smaller buildings on the Old Addenbrooke's Site, in Trumpington Street opposite the Scroope House Site, have been used by the Department from time to time. Currently, the Cambridge Programme for Sustainability Leadership is in the end building of that site, 1 Trumpington Street, having expanded and moved there under its previous name of Cambridge Programme for Industry in 1991.
• Over the course of the next ten years, the Department plans to consolidate the Department of Engineering entirely on the West Cambridge site.{{cite web|url=http://www.eng.cam.ac.uk/news/professor-david-cardwell-interview-professional-engineering-magazine|title=Professor David Cardwell interview for Professional Engineering Magazine - Department of Engineering|date=6 May 2015 |access-date=31 March 2017}}

• Full Blue Racing, a student run team which designs, builds and races formula student cars. {{Cite web |url = https://www.fullblueracing.co.uk/| access-date = 2024-02-28| title = Full Blue Racing Cambridge}}

• Cambridge University Eco Racing, a student run team which designs builds and races solar electric vehicles. {{Citation needed|date=June 2024}}{{Cite news |last=Lovett |first=Samuel |date=13 July 2015 |title=Students From Cambridge University Have Built A Solar-Powered Car And Intend To Race It |url=https://www.huffingtonpost.co.uk/2015/07/13/students-build-solar-powered-car_n_7783882.html |access-date=9 June 2024 |work=The Huffington Post UK}}
• Innocent Drinks, best known for the Innocent Smoothie brand.{{cn|date=November 2024}}
• Cambridge Consultants, an international technology development and consulting company.{{cn|date=November 2024}}
• Cambridge Scientific Instrument Company, first manufacturer of the scanning electron microscope.{{cite web |url=http://www.leica-microsystems.com/fileadmin/pdf_uploads/Leica%20BrandBook_en.pdf |title=Archived copy |access-date=2010-11-03 |url-status=dead |archive-url=https://web.archive.org/web/20101226051009/http://www.leica-microsystems.com/fileadmin/pdf_uploads/Leica%20BrandBook_en.pdf |archive-date=2010-12-26 }}

There are approximately 1,200 undergraduate students enrolled in the Department,{{Cite web |date=2013-10-25 |title=Prospective Undergraduates |url=https://www.eng.cam.ac.uk/undergraduates/prospective-undergraduates-0 |access-date=2024-08-07 |website=Department of Engineering |language=en}} with roughly 320 undergraduate students admitted each year. {{Citation needed|date=June 2024}}

All students are enrolled in general coursework during their first two years, which consists of mechanical and structural engineering, as well as materials, electrical, and information engineering. In their final two years of undergraduate work, students can choose to specialize in one of two concentrations (Engineering Tripos or Manufacturing Engineering Tripos), or receive a degree in General Engineering.{{cite web |title=Part IIA modules and engineering areas |url=http://teaching.eng.cam.ac.uk/node/4133 |access-date=2020-10-13}}

In the Engineering Tripos, students may further specialise in one or more of nine engineering disciplines:

• Aerospace and aerothermal engineering
• Bioengineering
• Civil, structural, and environmental engineering
• Electrical and electronic engineering
• Electrical and information sciences
• Energy, sustainability, and the environment
• Information and computer engineering
• Instrumentation and control
• Mechanical engineering

The Manufacturing Engineering Tripos provides an integrated course in industrial engineering, including both operations and management.{{cite web |url=http://www3.eng.cam.ac.uk/admissions/guide/index.html |title=Undergraduate Courses |access-date=2015-07-01 |url-status=dead |archive-url=https://web.archive.org/web/20121006072033/http://www.eng.cam.ac.uk/admissions/guide/index.html |archive-date=2012-10-06 }}

The Department of Engineering currently has about 190 faculty and PI-status researchers, 300 postdoctoral researchers, and 850 graduate students. Post-graduate education consists of both taught courses and research degrees (PhD, MPhil, and MRes). The majority of research students are enrolled in PhD programs, while around 10 percent follow the one-year MPhil (research) program.

The Department has a number of Engineering and Physical Sciences Research Council (EPSRC) Centres for Doctoral Training (CDTs), which follow a 1-plus-3 year model where a one-year MRes course is followed by a three-year PhD. Full funding for four years is provided through these centres. In addition to the CDTs, the Department has a limited number of EPSRC PhD studentships available for both British and EU students.{{cite web|url=http://www.eng.cam.ac.uk/graduates/graduates-overview|title=Graduates Overview - Department of Engineering|date=12 August 2013 |access-date=31 March 2017}}

== Research evaluation==

The Department was ranked 2nd in 2021 among UK engineering departments by the Research Excellence Framework (REF). The Department of Engineering was also ranked 2nd in 2014 by REF.

{{See also|:Category:Members of the University of Cambridge Department of Engineering}}

;Fellows of the Royal Society

{{div col}}

• William Dalby
• Alfred Ewing
• Bertram Hopkinson
• Sir Charles Edward Inglis
• John Baker
• John Horlock
• Brian Spalding{{cite journal |title=Biographical Memoirs of fellows of the Royal Society |doi=10.1098/rsbm.2018.0024 |s2cid=132105865 |doi-access=free }}{{cite journal |title=International Journal of Heat and Mass Transfer |series=Special Issue Honoring Professor D. Brian Spalding |date=August 2009 |volume=52 |issue=17 |pages=4063–4073 |doi=10.1016/j.ijheatmasstransfer.2009.03.058 |url=https://www.sciencedirect.com/science/article/abs/pii/S0017931009002282 |last1=Runchal |first1=Akshai K. |url-access=subscription }}
• Robert Mair
• Michael Gaster{{cite web |title=City University |date=31 January 2020 |url=https://www.city.ac.uk/about/people/academics/michael-gaster}}
• Daniel Wolpert
• John Arthur Shercliff{{cite journal |title=John Arthur Shercliff, Biographical Memoirs of Fellows of the Royal Society |journal=Biographical Memoirs of Fellows of the Royal Society |date=November 1985 |volume=31 |pages=524–541 |doi=10.1098/rsbm.1985.0018 |s2cid=71433327 |doi-access=free }}
• John Denton{{cite web |title=Royal Society Directory |url=https://royalsociety.org/people/john-denton-11326/}}
• Alistair MacFarlane
• Christopher Calladine
• Richard V. Southwell
• Frank Whittle
• Sir Christopher Sydney Cockerell
• Sir Bennett Melvill Jones
• Charles Oatley
• Harry Ricardo
• Andrew Schofield
• Ann Dowling
• Zoubin Ghahramani
• Keith Glover
• Melvill Jones
• John Robertson
• Mark Welland
• Roberto Cipolla
• Stephen Young
• Gareth McKinley
• William Hawthorne
• Alec Broers
• Kenneth Bray
• Andrew Clennel Palmer
• Morien Morgan
• Christopher Hinton
• David J. C. MacKay
• Michael F. Ashby
• Kenneth L. Johnson
• Norman Fleck
• Vikram Deshpande

{{div col end}}

; Members of the Order of Merit

• Frank Whittle
• Christopher Hinton
• Ann Dowling

;Timoshenko Medal Recipients

• Richard V. Southwell
• Kenneth L. Johnson
• James N. Goodier
• Norman Fleck

;Notable people for their contributions

{{div col}}

• John Baker, developer of the plasticity theory of design.
• Brian Spalding, a founder of computational fluid mechanics.
• Sir Christopher Sydney Cockerell, English engineer, best known as the inventor of the hovercraft.
• Sir Charles Edward Inglis, under whose leadership the department became the largest in the university.
• Sir Bennett Melvill Jones, who demonstrated the importance in streamlining in aircraft design.
• Ian Liddell, designer of the Millennium Dome.
• Charles Oatley, developer of one of the first commercial scanning electron microscopes.
• Nicholas Patrick, astronaut.
• W. E. W. Petter, aeronautical engineer, designer of Westland Lysander, English Electric Canberra and the Folland Gnat
• Harry Ricardo, major contributor to development of the internal combustion engine.
• Andrew Schofield, pioneer in centrifuge research.
• James Stuart, first true professor of engineering at Cambridge, was appointed in 1875.
• Constance Tipper, metallurgist, crystallographer and first woman to serve full-time as faculty in the department.
• Carol Vorderman, former Countdown host and mathematical television personality.
• Frank Whittle, inventor of the jet engine.
• Reverend Robert Willis, the first Cambridge professor to win an international reputation as a mechanical engineer.
• James N. Goodier, co-author of "Theory of Elasticity" with Stephen Timoshenko.
• Morien Morgan, sometimes referred to as "the Father of Concorde".
• Christopher Hinton, supervised the construction of Calder Hall, the world's first large-scale commercial nuclear power station.
• James A. Greenwood, winner of Tribology Gold Medal, known for the Greenwood and Williamson model of contact interfaces.
• Bertram Hopkinson, who proposed the Split-Hopkinson pressure bar method to measure the dynamic stress-strain response of materials.

{{div col end}}

• Glossary of engineering
• Department of Engineering Science, University of Oxford

{{Reflist}}

{{University of Cambridge}}

{{Authority control}}

Category:1875 establishments in England

Category:Universities and colleges established in 1875

Engineering, Department of

Engineering, Department of

Cambridge