ESTCube-2

ESTCube-2 launched on 9 October 2023 at 4:36 a.m. EEST, aboard the Vega rocket from the European Spaceport in Kourou, French Guiana. The launch was planned for 5 October 2023, but was delayed. As of 9 October 2023, communication to the satellite hasn't been established yet.{{Cite web |title=ESTCube-2 teekond kosmosesse |url=https://www.estcube.eu/blog/ESTCube--2's-journey-into-space |access-date=2023-10-09 |website=ESTCube-2 teekond kosmosesse |language=et}} Arianespace confirmed via email to the ESTCube-2 team that the satellite had failed to deploy and likely remained attached to the launch vehicle when it was deorbited and burned up on re-entry.{{Cite web |title=Two Vega VV23 Payloads Failed to Deploy |date=16 October 2023 |url=https://europeanspaceflight.com/two-vega-vv23-payloads-failed-to-deploy/ |access-date=2023-10-16}}

The launch of ESTCube-2 was on 9 October 2023, aboard the Vega rocket from the European Spaceport in Kourou, French Guiana. From this launch vehicle, the ESTCube-2 satellite would have been launched at an altitude of 564 km in Sun synchronous orbit. According to Marja-Liisa Plats, the head of communications at Tartu University, ESTCube-2 would have orbited the Earth 14 times a day (approx. every 103 minutes), and 8-10 of these orbits would have gone over Estonia. During these orbits over Estonia, communication from Tartu University to the satellite and signal to the satellite would have been possible for around 7 minutes.{{Cite web |last=Tambur |first=Silver |date=2023-10-10 |title=Estonia sends a student satellite to orbit |url=https://estonianworld.com/technology/estonia-sends-a-student-satellite-to-orbit/ |access-date=2023-10-11 |website=Estonian World |language=en-GB}}{{Cite web |date=2023-10-09 |title=Estonian student satellite ESTCube-2 reaches orbit - Baltic News |url=https://balticnews.com/estonian-student-satellite-estcube-2-reaches-orbit/ |access-date=2023-10-11 |language=en-US}}

File:Layers ionosphere.jpg

The primary goal of the ESTCube-2 project was to provide practical training in the development of space technology for undergraduate and high school students. This means that satellite design, prototyping, flight model assembly, testing and operating the satellite are the responsibility of students.

However, ESTCube-2 was more special than traditional university CubeSat missions because it was testing innovative technologies and solutions in space. The main purpose of the ESTCube-2 satellite's mission was to test the plasma brake,{{Cite journal|last=Janhunen|first=Pekka|date=2010|title=Electrostatic Plasma Brake for Deorbiting a Satellite|url=https://arc.aiaa.org/doi/abs/10.2514/1.47537?journalCode=jpp|access-date=5 January 2022|journal=Journal of Propulsion and Power|volume=26 |issue=2 |pages=370–372 |doi=10.2514/1.47537 |url-access=subscription}} which would reduce the satellite's orbit and burn it up in the Earth’s atmosphere at the end of the satellite’s mission. The inventor of the plasma brake is Pekka Janhunen, a researcher at the Finnish Meteorological Institute. This technology is intended to help combat an increasingly pressing problem in near-Earth orbit - space debris, i.e. the accumulation of dead satellites and their parts in orbit. Removing non-functional satellites from orbit would reduce the likelihood of a collision between a functioning satellite and unusable space debris.

File:ENG est cube-01 resized.jpg

A total of four innovative technologies were intended for testing on board the ESTCube-2:

• Testing of plasma brake technology in the Earth's ionosphere to remove the satellite from orbit at the end of its mission.
• Advanced testing of integrated satellite on-board systems and bus. This includes, in addition to conventional systems, a miniature star tracker, flywheels, a cold gas thrust module, and a radio experiment to determine the satellite's position.
• Testing of two Earth observation cameras developed at Tartu Observatory. The cameras operate at two different wavelengths and are designed to measure the NDVI vegetation index on Earth.
• The satellite is testing thin film anti-corrosion materials that are developed by Captain Corrosion (Maido Merisalu, a researcher at the University of Tartu).

The total estimated cost of ESTCube-2 was €250,000 ($264,000 USD). The satellite was launched in the framework of the European Commission's In-Orbit demonstration / Validation program.

ESTCube-2 was funded by donors and the Tartu Observatory of the University of Tartu. Entrepreneur Ahti Heinla supported the launch of the ESTCube-2 project with a significant contribution. More than 400 supporters donated €38,753 for the development of ESTCube-2 as part of a campaign run on the co-funding platform Hooandja.

{{Portal|Spaceflight}}

• ESTCube-1

{{Reflist}}

{{Commons category}}

• [https://space-travel.blog/ec2-deep-space-c9c63c7470fb Article about ESTCube-2 in Space Travel Blog]

Category:2019 in Estonia

Category:CubeSats

Category:Science and technology in Estonia

Category:2023 in Estonia