Lamborghini V12#Formula One

File:Wikilamjareng.jpg V12 engine used in the Espada and Jarama]]

When Ferruccio Lamborghini set out to compete with Ferrari, he contracted Giotto Bizzarrini to design the engine for his car and, according to some accounts, paid him a bonus for every horsepower over what Ferrari's V12 could produce. The finished {{convert|3.5|litre|cuin|0|lk=on|adj=on}} V12, with minor improvements, went on to become the 6.5 litre powering the Lamborghini Murciélago LP 640, and completed its service for Lamborghini with the final version of the Murciélago, the Murciélago LP 670-4 SuperVeloce.{{cite web|title=Lighter Murcielago here in 2008|url=http://www.autocar.co.uk/News/NewsArticle/AllCars/229128/|work=AutoCar.co.uk|publisher=© Haymarket Media Group|date=9 November 2007|access-date=4 January 2010|archive-url=https://web.archive.org/web/20080829204717/http://www.autocar.co.uk/News/NewsArticle/AllCars/229128/|archive-date=29 August 2008|url-status=dead}}{{clear left}}

The engine was designed from the start to be a quad cam 60 degree V12 - as an intentional snub to Ferrari's single overhead camshaft per-bank design. When the {{convert|3464|cc|1|adj=on}} prototype was tested in 1963, it was able to produce {{convert|370|bhp|kW PS|0|lk=in}} at 9,000 (rpm), or almost {{convert|107|bhp|kW PS|0}} per litre. Bizzarrini insisted the engine was mechanically capable of reaching {{convert|400|bhp|kW PS|0}} at 11,000 rpm with an uprated fuel system, but the design was judged adequate, and when fitted with production carburettors, all the auxiliary systems, and detuned for road use, the engine still made {{convert|280|bhp|kW PS|0}}.{{Cite web|url=http://jalopnik.com/5690495/a-farewell-to-the-old-lamborghini-v12/|title=A Farewell to the Old Lamborghini V12|date=15 November 2010 }}{{clear left}}

File:Lamborghini Murciélago with engine.jpg with its V12 engine on display]]

Over the years, this V12 engine has nearly doubled in displacement - first to {{convert|6192|cc|1|lk=on}}, and later to {{convert|6496|cc|1}}. It has seen the modification of the cylinder heads to allow four valves per cylinder, the replacement of Weber carburettors with electronic fuel injection, and the re-engineering of the lubrication system from a wet to a dry sump design. However, the engine that powers the Murciélago LP 640 can trace its lineage directly to the F1-inspired design of Bizzarrini and his team more than forty years ago.{{clear left}}

File:Lamborghini Aventador Engine.JPG]]

When Automobili Lamborghini was purchased in 1998 by the German Volkswagen Group subsidiary Audi AG, the V12 engine continued undergoing constant upgrades, growing its displacement from 5.7 litres (Diablo VT{{cite web

|url=http://www.lambocars.com/diablo/diablo_vt.html

|website=Lambocars.com

|title=Diablo VT specifications}}) to the final displacement of 6.5 litres in the Murciélago LP670-4 Superveloce.{{cite web

|url=http://www.lambocars.com/murcielago/murcielago_lp670-4_superveloce_specifications.html

|website=Lambocars.com

|title=Murciélago LP 670-4 SuperVeloce specifications|date=18 January 2013

}}

It took years to decide that a new engine was needed to be built from scratch, finally an all-new engine codenamed L539 having a displacement of 6.5 litres for the 2011 Aventador was developed. The new engine has a maximum power output of {{convert|700|PS|kW hp|0|abbr=on}}, is 18 kg lighter, is over-square (95mm bore, 76.4mm stroke){{cite web|url=http://www.motori.it/tecnica/6998/lamborghini-tutti-i-dettagli-e-i-video-del-nuovo-v12.html|title=Lamborghini: tutti i dettagli e i video del nuovo V12|publisher=www.motori.it|language=it|date=2010-11-17|access-date=2016-04-06}} and has a different firing order: 1–12–4–9–2–11–6–7–3–10–5–8 instead of 1–7–4–10–2–8–6–12–3–9–5–11. {{clear left}}

;engine configuration — 3.5 & 3.9: 60° V12 engine; wet sump lubrication system

;engine configuration — 6.2 & 6.5: 60° V12 engine; dry sump lubrication system

;engine displacement etc.

:3.5: {{convert|3465|cc|1|abbr=on}}, bore x stroke: {{convert|77x62|mm|2|abbr=on}} (stroke ratio: 1.24:1 - 'oversquare/short-stroke engine'); {{convert|288.7|cc|1|abbr=on}} per cylinder

:3.9: {{convert|3929|cc|1|abbr=on}}, bore x stroke: {{convert|82x62|mm|2|abbr=on}}

:4.8: {{convert|4754|cc|1|abbr=on}}, bore x stroke: 85.5 mm x 69 mm (3.37 in x 2.72 in).{{cite web

|url=http://www.lambocars.com/countach/countach_lp500_s_specifications.html

|website=Lambocars.com

|title=Countach LP500 S specifications

|date=8 May 2015

|access-date=2018-09-01}}

:5.2: {{convert|5167|cc|1|abbr=on}}, bore x stroke: {{convert|85.5x75|mm|2|abbr=on}}, compression ratio 9.5:1 and downdraft 6X2 barrel Weber carburetors.{{cite web

|url=http://www.lambocars.com/countach/countach_lp500_quattrovalvole_specifications.html

|website=Lambocars.com

|title=Countach LP5000 Quattrovalvole specifications

|date=8 May 2015

|access-date=2018-09-01}}

:5.7: {{convert|5707|cc|1|abbr=on}}, bore x stroke: {{convert|87x80|mm|2|abbr=on}}

:6.0: {{convert|5992|cc|1|abbr=on}}, bore x stroke: {{convert|87x84|mm|2|abbr=on}}{{cite web

|url=http://www.lambocars.com/diablo/diablo_gt.html

|website=Lambocars.com

|title=Diablo GT specifications}}

:6.2: {{convert|6192|cc|1|abbr=on}}, bore x stroke: {{convert|87x86.8|mm|2|abbr=on}} (stroke ratio: 1.00:1 - 'square engine'); {{convert|516|cc|1|abbr=on}} per cylinder; compression ratio: 10.7:1

:6.5: {{convert|6,495.71|cc|1|abbr=on}}, bore x stroke: {{convert|88x89|mm|2|abbr=on}} (stroke ratio: 0.99:1 - 'square engine'); {{convert|541.3|cc|1|abbr=on}} per cylinder; compression ratio: 11.2:1

;cylinder block & crankcase: cast aluminium alloy; pressed-in cylinder liners

;cylinder heads & valvetrain — 3.5, 3.9, 4.8: cast aluminium alloy; two valves per cylinder, 24 valves total, chain-driven double overhead camshaft

;cylinder heads & valvetrain — 6.2 & 6.5: cast aluminium alloy; 4 valves per cylinder, 48 valves total, chain-driven double overhead camshaft

;aspiration, fuel system & ignition system — 3.5: six twin-barrel side-draught 40 DCOE 2 Weber carburetors; one or two ignition distributors

;aspiration, fuel system & ignition system — 3.98: six twin-barrel down-draught carburettors; one or two ignition distributors

;aspiration, fuel system & ignition system — 6.2 & 6.5: two air filters, four cast alloy throttle bodies each with Magneti Marelli electronically controlled 'drive by wire' throttle butterfly valves, cast magnesium alloy intake manifold; two linked common rail fuel distributor rails, electronic sequential multi-point indirect fuel injection with intake manifold-sited fuel injectors; centrally positioned spark plugs, mapped direct ignition with 12 individual direct-acting single spark coils

;exhaust system — 6.2 & 6.5: two 3-branch exhaust manifolds per cylinder bank, connected to dual-inlet catalytic converters, heated oxygen sensors (lambda) monitoring pre- and post-catalyst exhaust gasses

:Type: 60° V12 fuel feed by Multi Point Fuel Injection

:Displacement: {{convert|6,498.48|cc|L CID|1|abbr=on}}

:Bore x stroke: {{convert|95x76.4|mm|2|abbr=on}} {{convert|541.54|cc|L CID|1|abbr=on}}

:Valvetrain: Variable valve timing electronically controlled

:Compression ratio: 11.8 (± 0.2) : 1

:Maximum power: {{convert|700|PS|bhp kW|0|abbr=on}} at 8,250 rpm

:Maximum torque: {{convert|690|Nm|0|abbr=on}} at 5,500 rpm

:Emission class: Euro 6 – LEV 2

:Emissions control system: Catalytic converters with lambda sensors

:Cooling system: Water and oil cooling system in the rear with variable air inlets

:Engine management system: Lamborghini Iniezione Elettronica (LIE) with Ion current analysis

:Lubrication system: Dry sump{{Cite web |url=http://www.lamborghini.com/en/models/aventador-lp-700-4/technical-specifications/ |title=Lamborghini Aventador LP 700-4: Technical specifications |access-date=2016-07-28 |archive-date=2016-07-29 |archive-url=https://web.archive.org/web/20160729090521/http://www.lamborghini.com/en/models/aventador-lp-700-4/technical-specifications |url-status=dead }}

:Weight: 235 kg{{cite web

|url=https://www.autocar.co.uk/car-news/new-cars/lambos-new-v12-detail

|website=Autocar.co.uk

|title=Lambo's new V12 in detail

|access-date=2018-10-28}}

:Type: 60° V12 fuel feed by Multi Point Fuel Injection

:Displacement: {{convert|6,498.48|cc|L CID|1|abbr=on}}

:Bore x stroke: {{convert|95x76.4|mm|2|abbr=on}} {{convert|541.54|cc|L CID|1|abbr=on}}

:Compression ratio: 12.6 : 1

:Maximum power: {{convert|825|PS|bhp kW|0|abbr=on}} at 9,250 rpm

:Maximum torque: {{convert|725|Nm|0|abbr=on}} at 6,750 rpm

:Emission class: Euro 6 – LEV 3

:Weight: 218 kg

{{See|Lamborghini LE3512}}

File:Lambo V12 F1.JPG's 3.5L V12 Formula One engine, the 3512, at the Lamborghini Museum.]]

Lamborghini made the move to Formula One in {{f1|1989}} when the FIA outlawed turbocharged engines.[http://statsf1.com/en/moteur-lamborghini.aspx Lamborghini 3512 Formula One V12 @ STATSF1] Former Scuderia Ferrari designer / engineer Mauro Forghieri was commissioned to design and build a new, 3.5 litre V12 engine for use by the French Larrousse team in 1989. Dubbed the Lamborghini LE3512,{{cite web|url=http://www.menontitanium.com/applicazioni-storiche/|title=Alcune applicazioni storiche - 1989/1993|trans-title=Some historical applications |language=it|access-date=2016-04-06}} (Lamborghini Engineering 3.5 liters 12 cylinders) the {{convert|3493|cc|1|abbr=on|lk=on}}, 80° V12 engine was reported to be the best sounding engine of the new 3.5L naturally aspirated formula. Lamborghini representatives stated at the engines début race, the 1989 Brazilian Grand Prix in Rio de Janeiro, that they chose a lower ranked team to join Formula One (Larrousse was in its third season using Lola chassis') as it was felt at the early stage of its development the 3512 would not be able to do justice to one of the teams usually closer to the front of the grid. Also, the front running teams already had existing engine suppliers in place (McLaren with Honda, Williams with Renault, Benetton with Ford, and Ferrari who made their own V12 engines).

The Lamborghini V12 did impress many in 1989 despite its unreliability, and the engines best result in its first year came thanks to fast but accident prone Larrousse driver Philippe Alliot when he qualified his Lola LC89 in 5th position for the Spanish Grand Prix at Jerez, only 1.417 seconds slower than the V10 McLaren-Honda of pole winner Ayrton Senna. Alliot then backed up that performance by scoring the engine's first point in Formula One by finishing 6th in the race and setting the 4th fastest race lap in the process. Unfortunately, Alliot's teammate for the second half of 1989, former Ferrari driver Michele Alboreto, never came to grips with either the Lola or the Lamborghini. In his eight races for Larrousse he recorded four DNF's, two failures to pre-qualify, one failure to qualify, and a single 11th-place finish in Portugal.

The Lamborghini V12's best finish came when Larrousse driver Aguri Suzuki finished 3rd in the infamous 1990 Japanese Grand Prix at Suzuka. Its time in Formula One (1989-1993) would prove to be frustrating though as poor reliability became the norm for the engine, despite being used by Grand Prix winning teams such as Lotus and Ligier who could boast driving talent such as Derek Warwick (Lotus - 1990), and Thierry Boutsen (Ligier - 1991). In a 2014 interview, Warwick said of the 3512 that it was "All noise and no go".

In 1993 after four years in Formula One with only one significant result for the engine, Bob Lutz of Lamborghini's parent company Chrysler, did a hand-shake deal with McLaren boss Ron Dennis for the team to test the LE3512 to evaluate its potential as a race winner.{{cite web|url=http://8w.forix.com/mc-lambo.html|title=McLaren's brief flirtation with the Chrysler empire|author=Rainer Nyberg|website=8w.forix.com|date=2001|access-date=2016-04-08|archive-url=https://web.archive.org/web/20160305002925/http://8w.forix.com/mc-lambo.html|archive-date=2016-03-05}}{{cite web|url=http://www.race2play.com/homepage/show_blog_posts/4226|title=What if Senna had driven a McLaren-Lamborghini in 1994?|publisher= F1 Racing|website=www.race2play.com|date=2011-04-04|access-date=2016-04-08|archive-url= https://web.archive.org/web/20140427030156/http://www.race2play.com/homepage/show_blog_posts/4226|archive-date=2014-04-27}} McLaren made a modified version of their {{f1|1993}} race car, the McLaren MP4/8 dubbed the MP4/8B, to test the engine (the test car took three months to modify to fit the longer and heavier V12). Testing was completed by triple World Champion Ayrton Senna, and future dual World Champion Mika Häkkinen at both the Silverstone Circuit in England and the Estoril circuit in Portugal. After his first drive of the car at Silverstone, Senna suggested certain changes to Forghieri (a less brutal 'top end' and a fatter mid-range), and he complied with engine power increased from {{Convert|710|bhp|kW PS|0|abbr=on}} to approximately {{Convert|750|bhp|kW PS|0|abbr=on}} and both drivers were very impressed despite the engine still being somewhat unreliable (Häkkinen reported a massive engine blow up while testing at Silverstone, though he did manage to lap the 5.226 km (3.260 mi) circuit some 1.4 seconds faster than the teams MP4/8 race car powered by a {{Convert|680|bhp|kW PS|0|abbr=on}} Ford V8 engine). According to reports, Senna even wanted to race the engine at the Japanese Grand Prix believing that while reliability might be a problem (according to McLaren engineers, the most they got out of any of the V12s post-Forghieri's changes was 19 laps at Silverstone before the engine blew up), at least he would be quicker than with the Ford powered race car (ironically Senna would win in both Japan and the last race in Australia with the existing MP4/8). Despite this however, Ron Dennis decided to go with Peugeot V10 engines in {{f1|1994}} due to a better commercial agreement that would give long term stability to the team and at the end of the 1993 season, the Lamborghini LE3512 was retired from Grand Prix racing after the company was sold by Chrysler to an Indonesian investor group led by Tommy Suharto.

The Lamborghini, which on all cars it powered carried the words "Chrysler powered by Lamborghini" (other than the McLaren MP4/8B which was all virgin white, though the test engines were badged as Chrysler), was one of only five V12 engines used in the naturally aspirated era from 1989–2013, the others being from Ferrari (1989-1995), Honda (1991-1992), Yamaha (1991-1992), and Porsche (1991). The only other 12 cylinder engines in Formula One during this time were disastrous efforts by Life Racing Engines with their W12 engine and Subaru who reintroduced the Flat 12 to the sport, both appearing in the first half of 1990.

• {{f1|1989}} - {{Convert|600|bhp|kW PS|0|abbr=on}}
• {{f1|1990}} - {{Convert|640|bhp|kW PS|0|abbr=on}}
• {{f1|1991}} - {{Convert|640|bhp|kW PS|0|abbr=on}}
• {{f1|1992}} - {{Convert|700|bhp|kW PS|0|abbr=on}}
• {{f1|1993}} - {{Convert|710|bhp|kW PS|0|abbr=on}}
• 1993 - {{Convert|750|bhp|kW PS|0|abbr=on}} (McLaren tests only)

• Races - 80 (49 starts)
• First Race - 1989 Brazilian Grand Prix at Jacarepaguá
• First Chassis - Larrousse Lola LC88C
• Last Race - 1993 Australian Grand Prix at Adelaide
• Last Chassis - Larrousse LH93
• Wins - 0
• Pole Positions - 0
• Podiums - 1 (3rd - 1990 Japanese Grand Prix at Suzuka, Aguri Suzuki, Larrousse Lola LC90)
• Points - 20
• Teams - Larrousse ({{f1|1989}}, {{f1|1990}}, {{f1|1992}}, {{f1|1993}}), Lotus (1990), Ligier ({{f1|1991}}), Modena Team (1991), Minardi ({{f1|1992}})
• Best Qualifying - 5th, Philippe Alliot, Larrousse Lola LC89, 1989 Spanish Grand Prix at Jerez
• Best Constructors' Championship - 6th, Larrousse, 1990 (11 points)
• Best Drivers' Championship - 12th, Aguri Suzuki, 1990 (6 points)

;Applications of the V12 engine

{{div col}}

• Lamborghini 350GT
• Lamborghini Miura
• Lamborghini Espada
• Lamborghini Countach
• Lamborghini LM002
• Lamborghini Diablo
• Lamborghini Murciélago
• Lamborghini Aventador
• Lamborghini Veneno
• Lamborghini Centenario
• Lamborghini Essenza SCV12
• Lamborghini Sián FKP 37

{{div col end}}

;List of Volkswagen Group petrol engines article

• V12 – 6.2/6.5 V12 430-471 kW sub-section of the above article
• V10 – 5.2 FSI V10 412 kW sub-section of the above article
• V10 – 5.0 V10 368 kW sub-section of the above article

{{reflist}}

• [http://www.Lamborghini.com Lamborghini.com] official website
• [http://jalopnik.com/5690495/a-farewell-to-the-old-lamborghini-v12 A Farewell to the Old Lamborghini V12]

{{Lamborghini}}

{{Lamborghini road car timeline 1963-1989}}

{{Lamborghini road car timeline 1980 to date}}

V12

Category:Gasoline engines by model

Category:V12 engines

Category:Formula One engines