SBB Ae 6/6#Numbering and namings

Before the advent of the Ae 6/6, trains on the Gotthard route were hauled mainly by Ae 4/6, Ae 4/7 and Be 6/8 ("crocodile"), which were underpowered by contemporary standards. This led to many trains needing bank engines on the Gotthard ramps, and adding them was a tedious, uneconomical and impractical procedure.

SBB needed a more powerful locomotive. The specification, created in 1949, included that the locomotive to be developed must be able the pull a 600 tonne train over the 26‰ gradients of the Gotthard line at {{cvt|75|km/h}}. The first prototype with the number 11401 was scheduled for delivery in 1952.{{cite book |title=Die elektrischen und Dieseltriebfahrzeuge der SBB. Band I: Baujahre 1904-1955. |last=Schneeberger |first=Hans |year=1995 |publisher=Verlag Minirex Luzern |location=Luzern |isbn=3-907-014-07-3 |lang=de}}{{rp|154-155}}

Intense trial runs were made with the prototypes. They had bogies with fixed axles, which led to heavy rail and wheel flange abrasion. Despite some early technical issues, the SBB were convinced they were on the right path with the development of the Ae 6/6. After introducing side-elastic wheelsets and making the wheel flanges of the middle axles smaller, the series production started in 1954, resulting in the first series locomotives delivered in 1955.{{rp|155-156}}

In its heyday, the 1950s and 1960s, the Ae 6/6 was the Gotthard locomotive par excellence, both for passenger and freight traffic. They were also used on the route through the Simplon tunnel. They were used in turns to ensure regular servicing in the main maintenance facility at Bellinzona. In the late 1960s, the two prototypes were retired from service on the Gotthard line; gradually followed by the rest of the class. After the introduction of the Re 6/6 locomotives, most Ae 6/6 were reallocated to services in the Swiss plateau. Subsequently, they were mostly used for freight trains, because they are too slow for the faster passenger services. An exception were those units hired by the BLS, which were sometimes used to haul relief and intercity trains over the Lötschberg route.

The locomotive 11401 was delivered in 1952, and put on test runs. 11402 was completed in 1953. They were tested in a two-day programme on the Gotthard route, where they ran up to {{cvt|900|km}} in one day. Temporarily, however, there were one or two of the six motors broken, which were replaced by ballast to keep the correct weight. The locomotives with broken motors where then used in services normally run by the less powerful Ae 4/7.{{rp|155}}

The series locomotives 11403-11520 were delivered from 1955 to 1966.{{rp|276-277}} They first replaced the Ae 4/7 and later the newer Ae 4/6.

For about 20 years, practically all heavy freight and passenger trains on the Gotthard route were hauled by this locomotive.

Locomotive namings were a feature introduced to Switzerland with the Ae 6/6, a custom adopted from Britain. All Ae 6/6 were decorated with a coat of arms, either of one of the 26 cantons or a Swiss commune. They were grand events at the time, and every canton was proud to get its "own" Ae 6/6. Locomotives 11426 to 11520 got coats of arms of communes. Only those with canton names had additional chrome embellishments.{{cite web |url=https://www.sbbarchiv.ch/detail.aspx?ID=510533 |title=SBB Historic (Ae 6/6 11402) |access-date=2025-06-12}}

File:FFS Ae 6-6 11407 Locarno 240514.jpg

The locomotives' names and numbers are summarized below:

When the new canton of Jura (the 26th Swiss canton) was created in 1979, following decades of separatist demands, a locomotive had to be found to carry the new canton's name in keeping with the history of the Ae 6/6 as {{lang|de|Kantonsloks}}. Instead of the logical 11426 (the next number after the rest of the canton-named locomotives), engine № 11483, named after Porrentruy, a Jura canton commune, was chosen to receive the name 'Jura'. Its previous name Porrentruy was transferred to Re 4/4^II 11239.

File:SBB Ae 610 Altdorf.JPG

In the 1970s, the two prototypes 11401 and 11402 were further developed, but never reached the quality of the series locomotives. In 1971, the first 'challenge' to the dominance of the Ae 6/6 came in the form of the new Re 4/4^III (Re 430) on the Gotthard line. The first real competition, however, was the Re 6/6 introduced in 1975, which was designed to be the successor of the Ae 6/6 and is nearly twice as powerful.{{rp|22}}

The former star of the Gotthard was thus displaced to 'lesser' services and has since mostly used in the Swiss plateau and Jura mountains.{{rp|22}}

The series locomotives 11403-11520 were built in 'modular' style, with each separate section easily replaced. Some were involved in serious accidents, and could be fixed in short time thanks to this system.

On 12 April 1989, 11401 «Ticino» collided with an Re 4/4^II at Winterthur. One third of the locomotive body was damaged, and the locomotive division of the main workshop Bellinzona wanted to scrap it. However, railfans stood up for the preservation of this very first Ae 6/6 locomotive, so it got a second chance. It was a most elaborate and expensive rebuild and took two years.

File:Ae 6-6 in Renens (front view).JPG

In 1999, all 120 locomotives were assigned to the SBB cargo division (SBB Cargo) following the internal reorganisation of the SBB. The Ae 6/6 is still a very reliable locomotive for freight traffic.

Because the Ae 6/6 have three-axle bogies, they are deemed "rail killers" because of the higher rail abrasion compared to engines with two-axle bogies. This was especially considered an issue for freight runs on the Chemin de fer du Jura route Porrentruy-Bonfol.

One of the biggest disadvantages of the Ae 6/6 is said to be the lack of multiple unit train control, which makes operating two engines together impractical. At one time, retrofitting this feature was proposed, but these plans were discarded due to the uncertain future of the locomotive.

It was also considered to equip some of the newer engines with cab signalling, to allow them to run on cab signalling only-routes. This was tentatively done on the 11512 «Horgen».

The remaining operational locomotives are still used for freight trains, but often they just stand about in larger shunting yards. After the coats of arms were found to be being stolen repeatedly (mostly as a souvenir, because it is generally assumed that the Ae 6/6 won't stay in service much longer and will eventually be scrapped), SBB Cargo ordered their removal in March 2005 and will presumably turn them over to SBB Historic.

On 6 April 2009, the SBB announced that 65 of the class will be withdrawn from service because of the slump in demand caused by the recession. 53 will be stored pending an upturn whilst 12 will probably be scrapped or cannibalised. Revenue service stopped in 2013.{{cite web |url=https://www.marklin-users.net/forum/posts/t29953-Feeling-Sad--Ae-6-6 |title=Marklin-users (Feeling Sad) |access-date=2025-06-14}}

The first locomotive to be withdrawn was 11410 «Basel-Stadt», due to an accident in 2002. Since then more of the class have been withdrawn, among them the prototypes 11402 «Uri» and 11401 «Ticino». The rate of withdrawal accelerated in 2009.

In 2002, 11401 «Ticino» was a guest on the open day at the Muttenz shunting yard, shortly after its 50th birthday. After a cable fire this locomotive was withdrawn on September 11, 2003.

The foundation SBB Historic already received the prototype Ae 6/6 11402 «Uri», which will either remain operational as a historic locomotive or will become a static exhibit at Erstfeld railway station. 11401 «Ticino», the other prototype, is hosted at the railway museum Eisenbahn Erlebniswelt (Railway Adventure World) in Horb am Neckar (Germany).{{cite web |url=http://www.eisenbahn-erlebniswelt.de/ae66.html |title=Railway Adventure World |lang=de |access-date=2025-06-12}} There is 11403 «Schwyz», and 11421 «Graubünden»,{{cite web |url=https://www.sbbarchiv.ch/detail.aspx?ID=510571 |title=SBB Historic (Ae 6/6 11421) |access-date=2025-06-12}} in the SBB Historic club, 11405 «Nidwalden», was used for spare parts by SBB Historic for 11407 «Aargau», 11416 «Glarus», is used as spare parts for the historic locomotive 11425 «Geneva», for SBB historic, and also 11411 «Zug»,{{cite web |url=https://www.sbbarchiv.ch/detail.aspx?ID=510569 |title=SBB Historic (Ae 6/6 11411) |access-date=2025-06-12}} is preserved by SBB Historic as well kept in running order.

Also 11413 «Schaffhausen» is on long-term loan to Club del San Gottardo Railway{{cite web |url=https://www.bahnonline.ch/1647/club-del-san-gottardo-hat-ae-6-6-11413-schaffhausen-uebernommen/ |title=Club del San Gottardo has taken over Ae 6/6 11413 «Schaffhausen» |access-date=2025-06-12 |lang=de}} from the Swiss Museum of Transport, Luzern.

In May 2006 Ae 6/6 11437 «Stadt Basel» derailed on a catch point after passing a ground signal ({{lang|de|Zwergsignal}}) at red on a shunting track. The engine ended up in a tilted position in the ballast beside the main track.

However, it wasn't damaged heavily and returned to service soon after the incident, despite being scheduled for retirement.

The SBB Ae 6/6s in various states of preservation include:

• Ae 6/6 11401 "Ticino" is preserved in the Eisenbahn Erlebniswelt in Horb, Germany.
• Ae 6/6 11402 "Uri" stationed in Erstfeld.
• Ae 6/6 11404 "Luzern" is preserved at the Elektrizitätsmuseum, Elektra Birseck Münchenstein.
• Ae 6/6 11406 "Obwalden". Only the cabin survives and is preserved by DESM.{{cite web |url=https://www.desm.ch/labor/lok-simulatoren |title=DESM (Our simulators) |lang=de |access-date=2025-06-14}}
• Ae 6/6 11407 "Aargau" stationed in Brugg. It is on loan to the association Mikado.{{cite web |url=https://www.mikado1244.ch/fahrzeuge/ |title=Mikado 1244 (Unsere Fahrzeuge) |lang=de |access-date=2025-06-14}} File:11407 Brugg.jpg
• Ae 6/6 11409 "Basel-Land" is a driving simulator at Railway Museum Kaeserberg{{cite web |url=https://www.kaeserberg.ch/en/to-visit/activities/simulator |title=Kaeserberg (Simulator) |access-date=2025-06-14}}
• Ae 6/6 11411 "Zug" stationed in Erstfeld.{{cite web |url=https://www.historic-erstfeld.ch/rollmaterial |title=SBB historic (Team Erstfeld) |access-date=2025-06-14 |lang=de}}
• Ae 6/6 11413 "Schaffhausen" is at Club del San Gottardo in Biasca.
• Ae 6/6 11416 "Glarus". It is no longer usable and used as a source of spare parts in Olten.
• Ae 6/6 11418 "St. Gallen" is on static display at Galliker Transport AG{{cite web |url=https://www.sguggiari.ch/3_ae6_6_accantonate.php |title=Ae 6/6 decommissioning |lang=it |access-date=2025-06-14}} Altishofen (it received the coat of arms of the canton of Lucerne instead of the original St. Gallen).
• Ae 6/6 11419 "Appenzell Innerrhoden" privately owned in Biasca.
• Ae 610 420-2 (formerly Ae 6/6 11420 "Appenzell Ausserrhoden") is parked in a small museum in Sissach, Basel Landschaft.
• Ae 6/6 11421 "Graubünden" preserved in Olten by Team 10439 Historische Loks.{{cite web |url=https://team10439.ch/fahrzeuge |title=Team 10439 Historiches Loks Olten(Fahrzeuge) |lang=de |access-date=2025-06-14}}
• Ae 6/6 11424 "Neuchâtel" preserved by the Swiss Train association.{{cite web |url=https://www.douaniere-depot-ferroviaire.ch/index.php/nos-locomotives |title=Swisstrain (Nos locomotives) |lang=fr |access-date=2025-06-14}}
• Ae 6/6 11425 "Geneva" preserved in Olten by Team 10439 Historische Loks.
• Ae 6/6 11456 "Olten" was scrapped in Kaiseraugst in late 2019 or early 2020. {{cite news |work=Oltner Tagblatt |url=https://www.oltnertagblatt.ch/solothurn/olten/olten-wird-verschrottet-ld.1382575 |date=2019-08-28 |title=“Olten” is scrapped |lang=de}}
• Ae 6/6 11481 "La Chaux-de-Fonds". Only the cab survives and serves as a driving simulator in the Railway Museum Kaeserberg in Granges-Paccot.
• Ae 6/6 11501 "Renens". Preserved by the Swiss Train association.

The coats of arms of the cantons and the municipalities from the retired locomotives were handed over to SBB Historic. The donated collection includes most of the coats of arms from the Ae 6/6 locomotives and also including builder's plates, locomotive name plates and letter sets from certain locomotives.{{cite web |language=de |url=https://www.sbbarchiv.ch/detail.aspx?ID=315696 |title=SBB Historic (Wappenschmuck an Triebfahrzeugen Ae 6/6 und Re 6/6) |author= |website=SBB Historic |access-date=2025-06-12}}

• List of stock used by Swiss Federal Railways
• Swiss locomotive and railcar classification

{{Commons category|SBB Ae 6/6}}

{{Reflist}}

• {{Cite book

|title=Encyclopedia of World Railway Locomotives

|series=Dover Transportation

|editor-first=P. |editor-last=Ransome-Wallis

|publisher=Courier Corporation

|orig-year=1959

|year=2001

|isbn=0486412474

|ref={{harvid|Ransome-Wallis|1959}}

|pages=191,208–211

}}

{{Standard gauge locomotives of Switzerland}}

{{DEFAULTSORT:SBB-CFF-FFS Ae 6 6}}

Category:Co′Co′ locomotives

Category:15 kV AC locomotives

Ae 6 6

Category:Electric locomotives of Switzerland

Category:SLM locomotives

Category:Brown, Boveri & Cie locomotives

Category:Standard-gauge locomotives of Switzerland

Category:Railway locomotives introduced in 1952

Category:Co′Co′ electric locomotives of Europe