South Australian Railways K class (broad gauge)

At a time of fierce competition between the Australian colonies, a railway line was extended from Kapunda to MorganThen known as North West Bend. on the River Murray, opening in 1878. The link allowed goods brought downstream on riverboats from New South Wales and Victoria to reach Port Adelaide for export more quickly and safely than by continuing on the river to the sea, since Morgan was only {{cvt|160|km|mi}} by rail to Adelaide but {{cvt|306|km|mi}} to the mouth of the river.{{cite book |last1= Baker |first1= Ronald |last2= Baker |first2= Margaret |last3= Reschke |first3= William |date= 1981 |edition= 2nd |title= Murray River pilot: Goolwa to Renmark, South Australia |location= Adelaide |publisher= Fullers Services Pty Ltd}}{{rp|10}} Until the spread of other railway lines cut out most of the river traffic, the South Australian Railways operated as many as six goods trains in each direction every day on the Morgan line.{{cite conference|title=The broad gauge K class locomotives of the South Australian Railways |first=Hugh |last=Williams |date=2008 |book-title= Proceedings of the 2008 convention |location=Adelaide |conference=Modelling the Railways of South Australia |pages=159–163}}

William Thow, the Locomotive Engineer of the SAR, designed a 0-6-4 tank locomotive to handle traffic on the new line's lightly laid track. Four were delivered in 1879 from the UK manufacturer Beyer, Peacock and Company. At that time they were the most powerful locos on the SAR, with the exception of two 0-6-0 J class locomotives.{{cite magazine |title= The K class locomotives of the South Australian Railways |first=Gifford |last=Eardley |date= June 1967 |magazine= ARHS Bulletin |location= Redfern |publisher= Australian Railway Historical Society |page= 117 }}

The new locomotives experienced mechanical failures (broken crank axles, fracturing of gunmetal axleboxes and excessive tyre wear on the leading driving wheels) and after a year were moved to hauling goods and mixed trains other North Lines and the Port Adelaide line.{{cite book |title=Steam locomotives and railcars of the South Australian Railways |first1=Ronald E. |last1=Fluck |first2=Robert |last2=Sampson |first3=Kim J. |last3=Bird |date=1986 |location= Adelaide, South Australia |publisher=Mile End Railway Museum (S.A.) Inc. |pages=54 |isbn=0959507337 }}

A major design weakness was the lack of a leading bogie ("pilot truck"), which led to frequent derailments, especially on the Adelaide Hills line, with its sharp curves, difficult gradients, and uncompensated track. A partial solution was to run the locomotives in reverse – i.e., with cab leading – so that the rear bogie led, providing guidance for the driving wheels. When that mode of operation predominated, the pilot ("cowcatcher") was moved to the bogie end. In their final role as shunting locomotives, the pilot was removed as a safety measure, since its presence made coupling and uncoupling difficult.

Despite their shortcomings, the locomotive superintendent considered them a good design and concluded that the main problem was in the track. Fourteen more locos were ordered during the next five years. Running numbers for the 18 were allocated with gaps: starting with no. 34, their numbers spanned a range of 36. In a most unusual development, Thow designed a narrow gauge version of the class, the sole representative of which was delivered in 1884. It was allocated number 52, i.e. within that number range, and also classified as K class, despite the different gauge and being lighter and noticeably smaller in many respects – including the driving wheels, which at {{cvt|3|ft|6|in|mm|0|comma=off}} diameter were {{cvt|6|in|mm|0|comma=off}} smaller than those of the broad-gauge K locomotives.

The initial mechanical failures were overcome and the locomotives were soon deployed on the {{cvt|12|km|mi}} Port Adelaide line, where they would haul loads up to {{convert|550|LT|ST t}}. When they worked on longer country lines, such as to Terowie, {{cvt|225|km|mi}} from Adelaide, where goods were transferred to the narrow gauge, a supplementary water tank wagon was attached. The downside was that the locomotives then had to work funnel-first because the only connection for the water was through a fitting attached to the rear of the engine.

Soon they could be seen again on the Morgan Line. One or two were lent or sold to contractors to help build the Hills line, but were quickly exchanged for machines that would reliably stay on the hills track. After some time with restrictions on where they could work, from about 1917 they were allowed on every broad-gauge line on the system. They occasionally worked trains on the Hills (or "South") line, but after the advent of the Q class, few saw service in the hills. When the SAR acquired the Glenelg Railway Company in 1899, the K class worked on the South Terrace (Adelaide) to Glenelg service. Nearer the end of their working lives, some were stationed at Port Adelaide for freight working in the area.

Lightly constructed lines to which the locomotives were suited were the Milang railway line and, especially in the 1920s, the Murraylands lines radiating from Tailem Bend. In the latter case the K class worked out of the Murray Bridge depot, and later the large depot at Tailem Bend; light servicing was carried out at both depots.

File:South Australian Railways K class (broad gauge) locomotive drawing (Hugh S. Williams).png.]]

During their six decades of service, the locomotives received a number of modifications, including rebuilds between 1893 and 1903. Changes were made to the cab roof and capacity of the coal bunkers; Ramsbottom safety valves replaced Salter type; and Westinghouse brakes were fitted. None appears to have been fitted with a steam generator or electric light.

The service of this ultimately quite useful class of tank locomotive came to an end about 1936 after the larger and more powerful locomotives of Commissioner William Webb arrived in the late 1920s, freeing up medium-sized locos for lighter duties. However, cutting up did not follow immediately, and one was sold in 1940 to the Australian Paper Manufacturers factory at Maryvale, Victoria. The SAR also retained one for shunting at various places in the Adelaide conurbation, including Islington Workshops. During the Second World War, three others were restored for similar service as an emergency measure. All four locomotives were cut up in 1956.

{{Reflist|group=note}}

{{Reflist}}

{{South Australian Railways locos|state=expanded}}

Category:Broad gauge locomotives in Australia

K

Category:Beyer, Peacock locomotives

Category:0-6-4T locomotives

Category:Railway locomotives introduced in 1879

Category:Shunting locomotives

Category:Scrapped locomotives