bus duct
{{Short description|Low resistance electrical conductor for high current transmission and distribution}}
{{Electrical Wiring Sidebar}}
Image:T_ratings_oldest_trick_in_the_book_002.png copper and 4000 A aluminium bus ducts]]
In electric power distribution, a bus duct (also called busway) typically uses sheet metal, welded metal{{Cite web |title=Isolated Phase Bus Duct |url=https://www.stacelectric.com/products/isolated-phase-bus-duct/ |access-date=2024-01-04 |website=Stace |language=en-US}} or cast resin to contain and isolate copper or aluminium busbars for the purpose of conducting a substantial current of electricity. It is an alternative means of conducting electricity to power cables or cable bus.
Originally a busway consisted of bare copper conductors supported on inorganic insulators, such as porcelain, mounted within a non-ventilated steel housing.{{cite web | title=IEEE 3001.5-2013 - IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems | website=The IEEE Standards Association | date=2013-12-11 | url=https://standards.ieee.org/findstds/standard/3001.5-2013.html | archive-url=https://web.archive.org/web/20140412015719/http://standards.ieee.org/findstds/standard/3001.5-2013.html | url-status=dead | archive-date=April 12, 2014 | access-date=2018-01-09}}
History
Busways were produced due to request of the automotive industry in Detroit in the late 1920s. Since that time, busways improved and became an integrated part of secondary network for industrial plants.
Construction
T_ratings_oldest_trick_in_the_book_004.png|Section of aluminium bus duct with sandwiched bus bars
T_ratings_oldest_trick_in_the_book_005.png|Innards of bus duct showing plastic wrappings of sandwiched busbars and hollow plastic tube spacers.
T ratings oldest trick in the book 006.png|Individual busbar wrapping
File:Pre-wired steel strut.png| Bus duct, also called busway, is available with (3) finger-safe #8AWG copper wires in steel housing.
Some bus ducts are rectangular similar to cable tray, but have thicker, cold-formed steel side rails and thinner sheet metal coverings. Others can be circular.{{Cite web |title=Isolated Phase Bus Duct |url=https://www.stacelectric.com/products/isolated-phase-bus-duct/ |access-date=2024-01-04 |website=Stace |language=en-US}} Busbars inside may be separated with distinct and even gaps between them, or “sandwiched” together.
Typically, individual busbars are wrapped or coated with a non-conducting, covalent material, such as plastic or (in older systems) electrical tape.
At the connection point, busbars flare out to enable connection to the next segment.
A plug-in bus duct system or busway can have disconnect switches and other devices mounted on it, for example, to distribute power along a long building. Many forms of busway allow plug-in devices such as switches and motor starters to be easily moved; this provides flexibility for changes on an assembly line, for example.Terrel Croft, Wilford Summers (ed)American Electricians Handbook Eleventh Edition, McGraw-Hill 1987, {{ISBN|0-07013932-6}}, pages 9-114 through 9-132 In addition to powering floor fixtures, busways can provide power to plug-in light fixtures and even IoT devices.{{Cite web |title=Why busSTRUT|url=https://busstrut.com/why-busstrut/|access-date=2024-01-13 |website=busSTRUT|language=en-US}}
Feeder busway is used to interconnect equipment, such as between a transformer and a switchgear line up. A variant type is a low-impedance busway, which is designed to have lower voltage drop by virtue of close spacing of bus bars, which reduces inductive reactance.
A trolley busway provides power to equipment that must be frequently moved. The busway is open at the bottom, and a movable collector assembly "trolley" is used to connect between the fixed bus bars in the busway and the cable connected to moving equipment.
Bus ducts are building service penetrants that are required to be externally firestopped where they penetrate fire separations required to have a fire-resistance rating.
See also
References
{{Reflist}}
External links
{{commonscat|Bus ducts}}
- [http://www.merriam-webster.com/dictionary/bus%20duct Merriam Webster Definition of Bus Duct]
- [https://www.youtube.com/watch?v=gvyfq-mY54o YouTube Bus Duct Installation]
- [https://www.youtube.com/watch?v=SAEyN8fw29E YouTube Bus Duct Construction and Installation]
- [http://ulstandards.ul.com/standard/?id=857 Underwriters Laboratories Standard UL857 abstract]
- [https://web.archive.org/web/20151003212810/https://standards.ieee.org/findstds/standard/C37.23-2003.html IEEE C37.23 Standard For Metal Enclosed Bus]
- [https://web.archive.org/web/20101230013454/http://standards.ieee.org/findstds/interps/C37.23-1987.html Interpretations for IEEE Std C37.23-1987 IEEE Guide for Metal-Enclosed Bus and Calculating Losses in Isolated-Phase Bus]
- [https://web.archive.org/web/20120721042249/http://standards.ieee.org/develop/project/3004.7.html IEEE P3004.7 - Recommended Practice for the Protection of Power Cables and Busway Used in Industrial and Commercial Power Systems]
- [https://ieeexplore.ieee.org/document/4158073/ IEEE Busway Short Circuit Testing Procedures]
- [https://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=7035409&newsearch=true&queryText=bus%20duct IEEE Mathematical model of high voltage sandwich bus duct]