Buick V8 engine#Nailhead2

File:1956 Buick 322 V8 engine (Century), left side view.jpg]]

Buick's first generation V8 was offered from 1953 through 1956; it replaced the Buick straight-eight. While officially called the "Fireball V8"{{cite book |last=Flory |first=J. "Kelly" Jr. |title=American Cars, 1946 to 1959; Every Model, Year by Year |year=2008 |publisher=McFarland & Company, Inc., Publishers |isbn=978-0-7864-3229-5}} by Buick, it became known by enthusiasts as the "Nailhead" for the unusual vertical alignment of its small-sized valves (Originally it was known to hot-rodders as the "nail valve", because the engine's small heads contained valves with long stems, which made them look like nails.){{cite web |title=Vintage Buick Engines |url=http://www.streetrodderweb.com/tech/0811sr_vintage_buick_engines/index.html |url-status=dead |archive-url=https://web.archive.org/web/20110716155606/http://www.streetrodderweb.com/tech/0811sr_vintage_buick_engines/index.html |archive-date=2011-07-16 |access-date=5 December 2018}}

During this era, Buick ranked smoothness above most other marketing objectives, and the Dynaflow transmission's non-shifting design was demonstrably smoother than the other rough shifting automatics then available. With the Dynaflow, a high torque engine was needed to provide adequate acceleration, so that's what the Nailhead was designed to deliver.

Both the intake and exhaust valves were on the intake manifold side of a "pent-roof combustion chamber". To offset restrictive port diameters and the smaller-sized valves [{{cvt|1.75|in}} intake, {{cvt|1.25|in}} exhaust], the Nailhead V8s used a camshaft with greater lift and duration. The small-diameter intake runners allowed these engines to develop high torque, with many exceeding 1 ft-lb/cu in (exceptional for the time).

First-generation Nailheads were painted "Late" Buick Green (also called Apple Green, used from 1953 to 1965).

The {{cvt|264|CID|L|1}} produced in 1954 and 1955 was a direct replacement for the 263 straight-eight and the only engine available in Buick's economy "Special" series vehicles. It was the smallest displacement Nailhead, sharing stroke and deck height with the 322, but having its own smaller bore {{cvt|3.625|in}}.

The larger {{cvt|322|CID|L|1}} was the original Nailhead, used by Buick from 1953 through 1956 in the Roadmaster, Super, and Century models, and the Special in 1956. It has a bore and stroke of {{cvt|4x3.2|in|1}}.

The 322 was also used in the 1956 through 1957 10,000-Series conventional-cab Chevrolet heavy duty trucks labeled as the Loadmaster.

Buick's second variation of the "Nailhead" was produced from 1957–1966. The "Fireball" name was dropped after 1957, but the 364 was very briefly called the "B-12000", referring to the 12,000 pounds of force generated by each piston.{{cite book|last=Flory Jr.|first=J. "Kelly"|title=American Cars, 1946-1959 Every Model Every Year|year=2008|publisher=McFarland |isbn=978-0-7864-3229-5}} Second generation Nailheads were painted "Late"{{clarify-inline|date=July 2024}} Buick Green, with the exception of those installed in the 1963 Riviera, which were silver, and the 1966 Riviera, which were red.

Buick, like most of its competitors, continued to expand their V8 engine to larger displacements. The {{cvt|364|CID|L|1}} was introduced in 1957 and produced through 1961, with a {{convert|4.125|x|3.4|in|mm}} (bore by stroke). The Special series cars came standard with the {{cvt|250|hp|0}} two-barrel carburetor version, where all other models got the {{cvt|300|hp|0}} four-barrel engine.

File:1963 Buick 401 Nailhead.jpg

The 364 was enlarged to {{cvt|6572|cc|CID L cc|1|adj=ri0|order=out}} and produced from 1959 to 1966. Bore and stroke were enlarged to {{convert|4.1875|x|3.64|in|mm}} respectively. Originally labelled a 401, it was later redesignated "400" (with no change to displacement) to meet 1960s GM directives for maximum allowable engine displacements in mid-size cars.

The 401/400 became Buick's muscle car powerplant of choice, used in the company's Skylark Gran Sport, Buick Sport Wagon and Buick Wildcat models, among others. The engine was variously designated the Wildcat 375, Wildcat 410, and Wildcat 445 depending on the torque each version produced. The Wildcat 410 was the two-barrel carbureted engine, standard on the 1962-63 LeSabre. The Wildcat 375 was a no-cost option for the 1962-63 LeSabre that used a lower compression ratio to run on lower-octane fuel. The various Wildcat engines had decals on their air cleaners indicating their version; however, the four-barrel edition of the 1966-67 small-block Buick 340 V8 was also labeled Wildcat 375 on its air cleaner, but was not a Nailhead.

The Wildcat 445, with a single four-barrel carburetor, was the standard engine in the Invicta, 1959-1966 Electra, 1962–1966 Buick Wildcat, 1963 Riviera, and 1965 Riviera (the 1964 and 1966 Riviera models used the 425 with a single four-barrel carburetor, labeled Wildcat 465, as standard equipment).

In an effort to overcome the restrictive exhaust-port design of the Nailhead, Buick drag racing enthusiasts in the 1960s adapted superchargers with a custom camshaft to feed intake air in through the exhaust ports; the larger intake ports became the exhaust outlets.

File:Super Wildcat 425ci 390hp Engine.jpg

The {{cvt|425|CID|L|1}} was produced from 1963 to 1966. Its bore and stroke measured {{convert|4.3125|x|3.64|in|mm}}. The largest-displacement version of the Nailhead, it began as an option on the 1963 Riviera, and was later available on the Wildcat and Electra models. The 1964 and 1966 Rivieras used the 425 engine as standard equipment. Mounted on a trolley, Buick 425s were also used as starter motors for the SR-71 Blackbird supersonic jet.{{Cite web|url=https://commons.wikimedia.org/wiki/File:AG330_start_cart.JPG|title=English: SR-71 Blackbird AG330 start cart, Hill Aerospace Museum, Utah|date=8 March 2010|access-date=7 June 2023|via=Wikimedia Commons}}

Four-barrel carburetion was standard on the basic 425, called the Wildcat 465 for the torque (as measured in lb-ft) it developed. The Super Wildcat (Regular Production Option {RPO}-coded Y48) was available on the 1964 Riviera as a factory option (2,122 produced), 1964 Electras (any model, production numbers unknown), 1965 Riviera Gran Sport and 1966 Wildcat GS, which included two four-barrel carburetors and matching intake manifold. Coded "MW", these parts were delivered in the car's trunk for dealer installation. Toward the end of the 1966 model year, around May 1966, Buick offered the Super Wildcat 465 with factory-installed

dual four-barrel Carter AFB carburetors as an "MZ" option. Only 179 of the 1966 Riviera GS cars were built with the MZ package.

File:Buick400.jpg

Buick introduced its "Big Block" V8 in 1967 to replace the largest displacement Nailheads. It retained the {{cvt|4.75|in|mm|1}} cylinder bore spacing and was produced in three displacements: 400, 430, and 455 cubic inches. Production continued through 1976.

The {{cvt|399.95|CID|cc|0}} big-block V8 was produced from 1967-1969. This engine has a bore and a stroke of {{cvt|4.04x3.9|in|mm|1}}. It was the only large V8 engine available for the intermediate-sized A-body Buicks due to the GM cubic inch limit restriction in effect through 1970.{{cite web|url=https://musclecarsdays.com/7-fastest-cars-1970s/|website=Muscle Cars Days.com|title=7 fastest cars 1970s|access-date=28 February 2019}} Most parts except the pistons interchange with the 430 and 455. This 400 engine had the distributor towards the front of the engine, as opposed to the 401/400 nailhead, which had its near the firewall.{{cite web|url=https://www.teambuick.com/reference/ident_eng_visual.php|website=Team Buick.com|title=Visually Identifying a 1960's or '70's GM engine|first=Bob K.|last=Mando|access-date=28 February 2019}}

File:07-1968 Wildcat Custom - Engine.jpg

The {{convert|430|CID|L|1|adj=on}} was only produced from 1967 until 1969. This engine had a bore and a stroke of {{cvt|4.1875x3.9|in|mm}}. The 430 four-barrel engine was rated at {{cvt|360|hp|kW|0}} and {{cvt|475|lbft|Nm|0}} of torque. This engine was used in large B-, C- and E-body Buicks. Most parts except the pistons interchange with the 400 and 455.

Applications:

• 1967-1969 Buick Electra{{cite web|url=https://www.conceptcarz.com/z19015/buick-electra-225.aspx|title=1967 Buick Electra 225|website=Conceptcarz.com|access-date=28 February 2019}}
• 1967-1969 Buick Riviera{{cite web|url=https://www.conceptcarz.com/z24029/buick-riviera.aspx|title=1967 Buick Riviera|website=Conceptcarz.com|access-date=28 February 2019}}
• 1967-1969 Buick Wildcat{{cite web|url=https://www.conceptcarz.com/vehicle/z12816/buick-wildcat.aspx|title=1969 Buick Wildcat|website=Conceptcarz.com|access-date=28 February 2019}}

{{clear}}

File:Buick 455 V8.JPG

File:Buick 455 Stage I Engine.JPG

The 400-based 455 was produced from 1970–1976, with a bore x stroke of {{cvt|4.31x3.9|in|mm|1}} for an overall displacement of {{cvt|7459|cc|CID L cc|1|adj=ri0|order=out}}. Most parts (except pistons and heads) interchange between the 400 and the 430. The base model was rated at {{cvt|350|hp|kW|0}}, while the 455 Stage 1 equipped with a single 4-barrel Rochester Quadrajet carburetor was rated at {{cvt|360|hp|kW|0}} at 4600 rpm.{{cite web|url=http://www.automobile-catalog.com/car/1970/85430/buick_gsx_stage-1_sport_coupe_4-speed.html|website=automobile-catalog|title=1970 Buick GSX Stage-1 Sport Coupe 4-speed|access-date=July 5, 2018}}{{cite web

|url=https://www.myclassicgarage.com/knowledge-base/1970-Buick-GS

|website=MyClassicGarage.com

|title=1970 Buick GS

|access-date=July 5, 2018}} The regular 455 produced a rated {{cvt|510|lbft|0}} of torque at 2,800 rpm, more than any other muscle car engine. The horsepower was somewhat reduced in 1971 mainly due to the reduction in cylinder compression ratio, a change which was mandated by GM in order to cope with the introduction of new federal laws which would require new cars to use low octane gasoline in an effort to reduce exhaust emissions. Then, starting in 1972, the horsepower rating on paper would be reduced again due to a shift from SAE gross to SAE net, down to approximately {{cvt|250|hp|kW|0}}. Unleaded gasoline and catalytic converters came into play in 1975 for all US manufactured cars. Tightening emissions controls would cause the engine to drop in power still further, a little at a time, through 1976.

The 455 was one of the first "thin-wall casting" engine blocks at GM, and because of this{{cite web|url=https://www.thoughtco.com/gm-455-cubic-inch-big-bloc-726346|website=ThoughtCo.com|title=Inside the 455 Cubic Inch Big Block from General Motors|first=Mark|last=Gittelman|date=24 December 2018|access-date=28 February 2019}} advance in production technology, it weighs significantly less than other engines of comparable size (for example, {{cvt|150|lb|kg}} less than a Chevrolet 454 and only {{cvt|25|lb|kg}} more than a Chevrolet 350).{{citation needed|date=December 2018}}

{{hidden begin

|title = Applications:

|titlestyle = background:#88FF88; text-align:left;

|bodystyle = text-align:left;

}}

Applications:

• 1970-1976 Buick Electra{{cite web|url=https://www.conceptcarz.com/z25377/buick-electra.aspx|title=1976 Buick Electra|website=Conceptcarz.com|access-date=28 February 2019}}
• 1970-1976 Buick Estate{{cite web|url=https://www.automobile-catalog.com/car/1972/159380/buick_estate_wagon_455-4_v-8_dual_exhaust.html|title=1972 Buick Estate Wagon 455-4 V-8 dual exhaust|website=Automobile-catalog.com|editor-first=Pawel |editor-last=Zal|access-date=28 February 2019}}
• 1970-1976 Buick LeSabre
• 1970-1976 Buick Riviera{{cite web|url=https://www.conceptcarz.com/vehicle/z13844/buick-riviera.aspx|title=1973 Buick Riviera|website=Conceptcarz.com|access-date=28 February 2019}}
• 1970-1972 Buick Skylark{{cite web|url=https://www.conceptcarz.com/vehicle/z9898/buick-skylark.aspx|title=1970 Buick Skylark|website=Conceptcarz.com|access-date=28 February 2019}}
• 1970 Buick Wildcat{{cite web|url=https://www.automobile-catalog.com/car/1970/90800/buick_wildcat_custom_sport_coupe.html|title=1970 Buick Wildcat Custom Sport Coupe|website=Automobile-catalog.com|editor-first=Pawel |editor-last=Zal|access-date=28 February 2019}}
• 1971-1973 Buick Centurion
• 1973-1974 Buick Century
• 1973-1974 Buick Gran Sport
• 1973-1974 Buick Regal

{{hidden end}}

Buick introduced a "small block" V8 in 1961 with a {{cvt|4.24|in|1}} cylinder bore spacing; it was produced in four displacements, 215, 300, 340, and 350. This design also became the basis of a highly successful cast iron V6 engine, the Fireball. Design features include an external oil pump, a forward-mounted distributor, and an integrated aluminum timing cover which incorporates the oil pump mechanisms, leaving the oil filter exposed to oncoming air for added cooling.

With the exception of the silver 1964 300, Buick small-blocks were painted "Late"{{clarify-inline|date=July 2024}} Buick Green through 1966. Buick engines were painted red from 1967-1974, medium metallic blue from 1975-1977, and light blue from 1978-1982.

The small-block was originally produced as an industry-first all-aluminum engine. Alas, after 3 years of production, persisting cylinder liner issues, trumped with new and cheaper thin-wall iron casting techniques, pushed a change to an iron block.

===215===

:See also Rover V8 engine

File:215 Buick in MGA (9045881524).jpg]]

GM experimented with aluminum engines starting in the early 1950s, when Aluminum Company of America (ALCOA) was pushing all automakers to use more aluminum. An early-development supercharged version of the {{convert|215|CID|L|1|adj=on}} V8 was used in the 1951 Le Sabre concept car,Flory, J. "Kelly", Jr. American Cars 1946-1959 (Jefferson, NC: McFarland & Coy, 2008), p.1021. and the 1953 Buick Roadmaster concept car.

GM designated Buick as engine design leader, and work on a production unit commenced in 1956. Originally intended for {{convert|180|CID|L|1|adj=on}} displacement, Buick decided on a larger, {{convert|215|CID|L|1|adj=on}} size, deemed ideal for the new Y-body cars introduced for 1961, like the Skylark.

Known as the Buick Fireball, the 215 had a bore and a stroke of {{cvt|3.5x2.8|in|mm|1}}, for an actual displacement of {{cvt|215.51|CID|cc|0}}. With its aluminum cylinder heads and cylinder block, at the time it was the lightest mass-production V8 in the world, with a dry weight of only {{cvt|318|lb|kg}}. Measuring {{cvt|28|in|cm}} long, {{cvt|26|in|cm}} wide, and {{cvt|27|in|cm}} high (same as the small-block Chevy),Baechtel, John. "Alternative Engines: Part 2--Buick V8", in Hot Rod Magazine, 11/84, p.67. it became standard equipment in the 1961 Buick Special.

At introduction, Buick's 215 was rated {{cvt|150|hp|kW|0}} at 4400 rpm.{{cite web|url=https://www.autoblog.com/photos/greatest-buick-cars-of-all-time/#slide-6817351|website=Autoblog.com|title=Greatest Buick cars of all time|editor=Autoblog staff|date=21 July 2017|access-date=28 February 2019}}{{cite web|url=https://stevemckelvie.wordpress.com/2017/12/21/the-rover-v8-engine/|website=Wordpress.com|title=The Rover V8 engine|first1=Steve|last1=McKelvie|date=21 December 2017|access-date=28 February 2019}} This was raised soon after introduction to {{cvt|155|hp|kW|0}} at 4,600 rpm. {{cvt|220|lbft|Nm|0}} of torque was produced at 2,400 rpm with a Rochester 2GC (2 Jet) two-barrel carburetor and 8.8:1 compression ratio. A mid-year introduction was the Buick Special Skylark version, which had 10.0:1 compression and a four-barrel carburetor, raising output to {{cvt|185|hp|kW|0}} at 4,800 rpm and {{cvt|230|lbft|Nm|0}} at 2,800 rpm.

For 1962, the four-barrel-equipped engine's compression ratio was increased to 10.25:1 and horsepower to {{cvt|190|hp|kW|0}} at 4,800 rpm and {{cvt|235|lbft|Nm|0}} at 3,000 rpm. The two-barrel engine was unchanged. For 1963, the four-barrel was bumped to 11.0:1 compression and an even {{cvt|200|hp|kW|0}} at 5,000 rpm and {{cvt|240|lbft|Nm|0}} at 3,200 rpm, {{cvt|{{#expr:200/215 round 2}}|hp|1}}/cu in. The higher output "Power Pack" was equipped with higher lift camshaft .0.518" intake/ 0.523" exhaust with increased duration 305/310 and required 99 research octane fuel.

Pontiac used the Buick version of the 215 in its Y-body cars, the Tempest and LeMans. At that time the engine was closely associated with the Buick brand, and Pontiac sold few cars with it, using it only in 1961 and 1962.

Although sharing basic architecture with the Buick, Oldsmobile developed its own all-aluminum 215, the "Rockette V8", to install in its F-85 Cutlass Y-body. Its angled valve covers were designed by Oldsmobile engineers to look like a traditional Olds V8.

Olds also released a turbocharged version, the {{cvt|215|hp|kW}} Turbo-Rocket, in its 1962–63 Oldsmobile Jetfire. Flory, J. "Kelly", Jr. American Cars 1960-1972 (Jefferson, NC: McFarland & Coy, 2004), pp.205 & 246. Together with Chevrolet's turbocharged 1962 Corvair Spyder, these were the first turbochargers ever offered in passenger cars.

Produced on a separate assembly line, the Olds 215 was somewhat heavier at {{cvt|350|lb|kg}}. Intended to alleviate a head-warping problem on high-compression versions, Oldsmobile added a sixth head bolt on the intake manifold side. This meant that the five-bolt Buick heads would fit on Oldsmobile blocks, but not vice versa. The Oldsmobile used wedge-shaped/quench combustion chambers/pistons that allowed larger valves, while the Buick had a 37-cc wedge combustion chamber and used "dished head" pistons.{{cite magazine|url=https://www.teambuick.com/reference/library/affordable_aluminum_v-8.php|via=TeamBuick.com|title=Affordable Aluminum V-8's|last=Davis|first=Marian|magazine=Hot Rod|date=March 1985|access-date=28 February 2019}} Altering the compression ratio on the Oldsmobile 215 required changing the heads, but on a Buick 215, only the pistons were changed, which was less expensive and simpler.

Casting-sealing technology was not advanced enough at that time, and hidden porosity problems caused serious oil leaks, producing an abnormally high scrap ratio. The factory had to make extensive use of air gauging for leak checks, and was unable to detect leaks on blocks that were as much as 95% complete. This raised the cost of complete engines to more than that of a comparable all cast-iron engine, so aluminum blocks were cancelled after the 1963 model year. Another problem was clogged radiators from antifreeze mixtures incompatible with aluminum.

The 215's very high power-to-weight ratio made it immediately interesting for automobile and boat racing. Mickey Thompson entered a stock-block 215-powered car in the 1962 Indianapolis 500, the first stock-block engine since 1946 and the only non-Offenhauser-powered entry in the race. Rookie driver Dan Gurney qualified eighth and raced well for 92 laps before retiring with transmission problems.

Surplus engine blocks of the Oldsmobile F85 version formed the basis of the Australian Formula One Repco V8 used by Brabham to win the 1966 Formula One world championship, although only the earliest engines had any Oldsmobile components. The majority of Repco RB620 engines were cast and built in-house at Repco.

Rights to these engines were purchased by the British Rover Company and used in the 1967 Rover P5B that replaced the 3 L straight six Rover engined P5. Throughout the years, the Rover Company (which became part of British Leyland in 1968), and its successor companies constantly improved the engine making it much stronger and more reliable. Capacities ranged from {{cvt|215|to|307|cuin|L|1|disp=flip}}. This engine was used for V8 versions of the MGB GT known as the GTV8. Rover also used the engine in the 1970 Range Rover. Morgan used the Rover version in its Plus 8.Boddy, William. "Morgan", in Northey, Tom, executive editor. World of Automobiles (London: Orbis, 1974), Volume 12, p.1419. American 215s have also been engine swapped into countless other platforms, especially Chevrolet Vegas{{cite magazine |url=http://www.team.net/TR8/mp/html/body_buick_215.html |via=Team.net |title=Chevy Small Block |magazine=Hotrod |date=March 1985 |access-date=28 February 2019}} and later British cars including the MG RV8 in the 1990s,{{cite web|url=https://www.hemmings.com/magazine/hsx/2011/04/Buick-215-cu-in--V-8-Rover-3-5L/3698361.html|website=Hemmings.com|title=Buick 215-cu.in. V-8/Rover 3.5L|editor=Issue of Hemmings Sports & Exotic Car|first1=Jeff|last1=Koch|date=April 2011|access-date=28 February 2019}} Triumph TR8, and various sports sedans and sports cars by the MG Rover Group and specialist manufacturers such as TVR. The engine remains well-supported by enthusiast clubs, specialist parts suppliers, and by shops that specialize in conversions and tuning.

File:1967 300ci Buick V8 engine in a Skylark.jpg]]

In 1964, Buick replaced the 215 with an iron-block engine of very similar architecture. The new "small block" engine had a bore of {{cvt|3.75|in|mm|1}} and a stroke of {{cvt|3.4|in|mm|1}} for a displacement of {{cvt|4923|cc|CID L cc|1|adj=ri0|order=out}}. It retained the aluminum cylinder heads, intake manifold, and accessories of the 215 for a dry weight of {{cvt|405|lb|kg}}. The 300 was offered in two-barrel form, with 9.0:1 compression, making {{cvt|210|hp|kW|0}} at 4600 rpm and {{cvt|310|lbft|Nm|0}} at 2400 rpm, and four-barrel form, with 11.0:1 compression, making {{cvt|250|hp|kW|0}} at 4800 rpm and {{cvt|355|lbft|Nm|0}} at 3000 rpm.

For 1965, the 300 switched to cast-iron heads, raising dry weight to {{cvt|467|lb|kg}}, still quite light for a V8 engine of its era. The four-barrel option was cancelled for 1966, and the 300 was replaced entirely by the 350 in 1968.

In 1964, while nearly all Buick engines were painted "Buick Late Green", the 300 V8s were painted silver instead. In 1966 Buick engines switched to "Buick Late Red", but until 1967 at least, the 300 V8 (and the 225) were still painted Buick Late Green.{{cite web | url = https://www.teambuick.com/reference/engine_colors.php | title = Buick Engine Colors, Which One is Right For You! | publisher = Team Buick | work = Reference }} The Apollo 5000 GT sports car, (also sold as the Vetta Ventura) used this engine.

In 1966, the 300's stroke was increased to {{cvt|3.85|in|mm|1}} in a raised block to create the 340, displacing {{cvt|5574.48|cc|CID L cc|1|adj=ri0|order=out}}, as a replacement for the four-barrel-carbureted 300. The taller deck (raised by {{cvt|0.5625|in|mm|1}} compared to the 215/300's) meant the intake manifold was of a new design to bolt to the otherwise interchangeable cylinder heads.

It was offered with two- or four-barrel carburetion, the two-barrel with a 9.0:1 compression rated at {{cvt|220|hp|kW|0}} at 4,000 rpm and {{cvt|340|lbft|Nm|0}} at 2,400 rpm, and the four barrel with 10.25:1 compression, rated at {{cvt|260|hp|kW|0}} at 4,000 rpm and {{cvt|375|lbft|Nm|0}} at 2,800 rpm. It was only produced through 1967, being replaced by the new small block {{cvt|350|CID|L|1}} in 1968.

File:1969 Buick GS 350 small-block V8 engine.jpg]]

Buick adopted the popular 350 size in 1968 for their final family of V8 engines, which was produced through 1980. Although it shared the displacement of the other GM small blocks, including the Chevrolet 350, Oldsmobile 350, and Pontiac 350, the Buick blocks were of a substantially different proprietary company design. The Buick 350 featured the same {{cvt|3.8|in|mm|1}} bore as the {{cvt|231|CID|L|1}} version of the Buick 90° V6 and retained the {{cvt|3.85|in|mm|1}} stroke of the previous {{cvt|340|CID|L|1}} V8. The exact displacement is {{cvt|349.31|CID|cc|0}}.

The major differences of the 350 in comparison to other GM V8s are Buick's "deep-skirt" engine block construction, the use of cast iron with increased nickel content, under-square cylinder bore sizing, {{cvt|3|in|mm|1}} crankshaft main journals, and {{cvt|6.385|in|mm}} connecting rods. Of all the GM "350s", the Buick has the longest piston stroke. This design characteristic made the engine significantly wider than the others — essentially the same as the Buick big-blocks, which have the shortest stroke of the GM big-blocks. The engine garnered a reputation as rugged and durable,{{cite web|url=https://itstillruns.com/350-buick-engine-specifications-7562961.html|title=Buick 350 engine specifications|website=It still runs.com|first=James|last=Jordan|access-date=28 February 2019}} and some of its design characteristics are found in other Buick-designed GM engines, such as the {{cvt|231|CID|L|1}} V6 and its 3800 descendants.

The 350 was used by Kaiser-Jeep and AMC Jeep in the Jeep Gladiator and Wagoneer models from 1968–71;{{cite web|url=http://www.jeeptech.com/engine/dauntless350.html|title=Jeep Engine: Dauntless Buick 350 V8|website=www.jeeptech.com|access-date=5 December 2018}} in these applications, the engine was billed as the Dauntless V8.

{{hidden begin

|title = Applications:

|titlestyle = background:#88FF88; text-align:left;

|bodystyle = text-align:left;

}}

• 1968-1972 Buick Skylark{{cite web|url=https://www.myclassicgarage.com/knowledge-base/1970-Buick-Skylark|title=1970 Buick Skylark|website=Myclassicgarage.com|access-date=28 February 2019}}
• 1968-1972 Buick Sport Wagon
• 1968-1971 Jeep Wagoneer{{cite web|url=http://1970jeepwagoneer.com/1970_Jeep_Wagoneer/Dauntless_Buick_350.html|title=Dauntless Buick 350|website=1970jeepwagoneer.com|access-date=28 February 2019}}
• 1968-1971 Jeep Gladiator{{cite web|url=https://www.allpar.com/trucks/jeep/gladiator.html|title=1963-1987 Jeep Gladiator and J-Series Pickups|website=Allpar.com|access-date=28 February 2019}}
• 1971-1973 Buick Centurion{{cite web|url=https://www.conceptcarz.com/s16328/buick-centurion.aspx|title=1973 Buick Centurion|website=Conceptcarz.com|access-date=28 February 2019}}
• 1971-1980 Buick Electra{{cite web|url=http://classiccarsmarks.com/buick/344061-1979-buick-electra-coupe-350-v8-automatic-classic-vintage-collector.html|title=1979 Buick Electra Coupe 350 V8 automatic classic vintage collector|website=Classiccarsmarks.com|access-date=28 February 2019}}
• 1971-1980 Buick LeSabre{{cite web|url=https://www.conceptcarz.com/s8909/buick-lesabre.aspx|title=1972 Buick Le Sabre|website=Conceptcarz.com|access-date=28 February 2019}}
• 1973-1975 Buick Apollo{{cite web|url=http://classiccarsmarks.com/buick/14976-1974-buick-apollo-four-door-gm-350-four-barrel.html|title=1974 Buick Apollo four-door, GM 350 four-barrel|website=Classiccarsmarks.com|access-date=28 February 2019}}
• 1973-1977 Buick Century{{cite web|url=https://www.conceptcarz.com/z28736/buick-century.aspx|title=1973 Buick Century|website=Conceptcarz.com|access-date=28 February 2019}}
• 1973-1977 Buick Regal{{cite web|url=https://www.conceptcarz.com/z23180/buick-regal.aspx|title=1973 Buick Regal|website=Conceptcarz.com|access-date=28 February 2019}}
• 1975 Pontiac Ventura{{cite web|url=https://www.hemmings.com/stories/2016/01/13/hemmings-find-of-the-day-1975-pontiac-ventura-sj-sprint|title=1975 Pontiac Ventura SJ Sprint|access-date=4 February 2021}}
• 1975-1979 Buick Skylark{{cite web|url=https://www.conceptcarz.com/z20068/buick-skylark.aspx|title=1978 Buick Skylark|website=Conceptcarz.com|access-date=28 February 2019}}
• 1977-1980 Buick Estate{{cite web|url=https://www.automobile-catalog.com/car/1978/184100/buick_estate_wagon_limited_5_7l_v-8.html|title=1978 Buick Estate Wagon limited 5.7L V-8|website=Automobile-catalog.com|editor=Pawel Zal|access-date=28 February 2019}}
• 1977-1978 Buick Riviera{{cite web|url=https://www.conceptcarz.com/vehicle/z16332/buick-riviera.aspx|title=1977 Buick Riviera|website=Conceptcarz.com|access-date=28 February 2019}}

{{hidden end}}

In the mid-1970s, Buick's 455 big block became unable to meet fuel economy/emission requirements and was phased out, with the Buick 350 remaining as a factory option until 1980. In their place a variety of other GM divisions' V8s were offered, both as standard equipment and factory options. These included:

The Oldsmobile V8 engine#260 was an Oldsmobile V8 engine shared with Buick:{{cite web|url=https://www.automobile-catalog.com/car/1976/174275/buick_skylark_s_2-door_coupe_4_3l_v-8_hydra-matic.html|website=Automobile-catalog.com|title=1976 Buick Skylark S 2-door coupe 4.3L V-8 Hydra-Matic|editor=Pawel Zal|access-date=28 February 2019}}

• 1975–1977 Buick Skylark

The Pontiac V8 engine#301 was a Pontiac V8 engine shared with Buick.{{cite web|url=https://www.automobile-catalog.com/car/1977/174755/buick_skylark_s_2-door_coupe_4_9l_v-8_automatic.html|website=Automobile-catalog.com|title=1977 Buick Skylark S 2-door coupe 4.9L V-8 automatic|editor=Pawel Zal|access-date=28 February 2019}}

The Chevrolet Small-Block engine#305 was a Chevrolet V8 engine shared with Buick:

• 1978–1987 Buick Regal{{cite web|url=https://www.automobile-catalog.com/car/1978/179555/buick_regal_limited_coupe_5_0l_v-8_4-bbl__automatic.html|website=Automobile-catalog.com|title=1978 Buick Regal Limited Coupe 5.0L V-8 4-bbl. automatic|editor=Pawel Zal|access-date=28 February 2019}}
• 1975–1979 Buick Skylark{{cite web|url=https://www.automobile-catalog.com/car/1978/175175/buick_skylark_custom_2-door_coupe_5_0l_v-8_automatic.html|website=Automobile-catalog.com|title=1978 Buick Skylark Custom 2-door Coupe 5.0L V-8 automatic|editor=Pawel Zal|access-date=28 February 2019}}

The Oldsmobile V8 engine#307 was an Oldsmobile V8 engine shared with Buick:{{cite web|url=http://www.rebuiltcrateengines.com/oldsmobile-307-hurst-olds-v8-p-2151.html|website=Rebuilt crate engines.com|title=Oldsmobile 307 Hurst Olds V8|access-date=28 February 2019}}

• 1980–1985 Buick Lesabre
• 1980–1984 Buick Electra
• 1980–1985 Buick Riviera
• 1980–1990 Buick Estate Wagon
• 1986–1987 Buick Regal

The Oldsmobile V8 engine#403 was an Oldsmobile V8 engine shared with Buick:{{cite web|url=https://www.automobile-catalog.com/car/1978/184400/buick_electra_park_avenue_coupe_6_6l_v-8.html|website=Automobile-catalog.com|title=1978 Buick Electra Park Avenue Coupe 6.6L V-8|editor=Pawel Zal|access-date=28 February 2019}}

• 1977 Buick Century estate
• 1977–1979 Buick Riviera
• 1977–1979 Buick Electra
• 1977–1979 Buick Estate Wagon
• 1977–1979 Buick LeSabre

{{Commons category|Buick V8 engine}}

• Buick straight-8 engine
• Buick V6 engine

From the 1950s-1970s, each GM division had its own V8 engine family. Many were shared among other divisions, but each design is most-closely associated with its own division:

• Cadillac V8 engine
• Chevrolet Small-Block engine
• Chevrolet Big-Block engine
• Oldsmobile V8 engine
• Pontiac V8 engine
• Holden V8 engine

GM later standardized on the later generations of the Chevrolet design:

• GM LT engine — Generation II small-block
• GM LS engine — Generation III/IV small-block
• List of GM engines

{{Reflist}}

• {{cite book | author=Peter C Sessler | title=Ultimate American V8 Engine Data Book | publisher=MotorBooks/MBI Publishing Company | year=1999 | isbn=0-7603-0489-0}}

{{DEFAULTSORT:Buick V8 Engine}}

V8

Buick 350

Category:V8 engines