CCGS Terry Fox

In the mid-1970s, Gulf Canada Resources began developing an Arctic drilling system consisting of two mobile drilling units: a Mobile Arctic Caisson (MAC) that could be submerged and filled with gravel to form an artificial drilling island in waters up to {{convert|40|m|ft}} in depth and a floating Conical Drilling Unit (CDU) designed for drilling in water depths between {{convert|40|and|60|m|ft}} while afloat. The intention of this development was to overcome the relatively short operating window of drillships during the ice-free season (100 to 110 days a year) and the water depth limitations of artificial dredged islands in the Canadian part of the Beaufort Sea. The drilling units, each capable of completing one exploration well per year, would be supported by four Arctic Class 4 vessels: two large icebreakers providing 24-hour ice management and standby services on the drilling site and two smaller icebreaking vessels responsible for anchor handling and supply runs between the drilling rigs and coastal bases. By 1982, both drilling units and all four icebreaking vessels were under construction in Canada and Japan for BeauDril, Gulf Canada's drilling subsidiary, and the company had committed itself to a billion-dollar exploration program between 1983 and 1988.{{Citation|last=Marks|first=Adams|title=Gulf's Proposed Drilling Systems for the Beaufort Sea|journal=APOA Review|volume=5|issue=2|pages=9–12|year=1982}}

The icebreaker design was provided by the Montreal-based engineering company German & Milne. During the development phase, the hull form was extensively tested at the Hamburg Ship Model Basin (HSVA) ice tank with particular emphasis of preventing broken ice floes from flowing under the hull and into the propellers. The result was a production-friendly fully-developable hull form with a semi-spoon bow and large ice plough.{{citation|url=https://trid.trb.org/view/418548|title=Kalvik and Terry Fox: Arctic Class 4 icebreaking, anchor-handling tug/supply vessels|date=October 1983|work=Canadian Shipping and Marine Engineering|pages=31–35|volume=55}}{{citation|title=Gulf's Arctic class 4 multi-purpose icebreakers|date=September 1983|work=Shipbuilding & Marine Engineering International|page=348}} The construction of the two icebreakers was awarded to Burrard-Yarrows Corporation in December 1979 and the work was split between the company's Victoria and Vancouver divisions. In order to expedite the delivery of the vessels, Gulf Canada had already purchased the engines, gearboxes, shaft lines and propellers before signing the C$79 million shipbuilding contract for two hulls.{{citation|title=More icebreakers for Beaufort Sea development|date=January 1982|work=Shipbuilding & Marine Engineering International|pages=23–24}}{{Citation|last1=Clark|first1=Karin|last2=Hetherington|first2=Cory|last3=O'Neill|first3=Chris|last4=Zavitz|first4=Jana|year=1997|title=Breaking Ice With Finesse: Oil & Gas Exploration in the Canadian Arctic| publisher =The Arctic Institute of North America|isbn =978-0919034945}}

The keel of newbuilding number 107 was laid at the Burrard-Yarrows Vancouver shipyard on 15 June 1982 and the vessel was launched on 23 April 1983 as Terry Fox. While the other BeauDril icebreakers and drilling units were given names drawn from the Northern Territories native languages, Terry Fox was named after Terrance Stanley "Terry" Fox (1958–1981), a Canadian athlete, humanitarian and cancer research activist known for his 1980 Marathon for Hope, an attempted cross-Canada run to raise money and awareness for cancer research, after losing his right leg to osteosarcoma. The icebreaker was completed on 16 September 1983, slightly behind the original schedule which called for delivery in April when Gulf Canada's exploratory drilling program was set to begin. Terry Fox{{'}}s sister ship, Kalvik, had been delivered by Victoria shipyard in July of the same year.{{csr|register=SEAWEB|id=8127804|shipname=Vladimir Ignatyuk|accessdate=4 May 2019}} At the time, Beaudril's two {{convert|23200|hp|kW|abbr=on}} icebreakers were the most powerful privately owned icebreaking vessels in the world.{{citation|title=Kalvik, Terry Fox in Service|date=November 1983|work=Harbour & Shipping|pages=26–34}}{{cite web |url=https://magazines.marinelink.com/Magazines/MaritimeReporter/198310/content/delivers-icebreakerutility-resources-204099 |title=Burrard Yarrows Delivers Icebreaker/Utility Vessels To Gulf Canada Resources |work=Maritime Reporter |date=October 1983 |page=42 |accessdate=20 July 2018}}

Terry Fox is {{convert|88|m|ft|0}} long overall and {{convert|75|m|ft|0}} between perpendiculars. She has a beam of {{convert|17.82|m|ft|0}} and draws {{convert|8.3|m|ft|0}} of water when fully laden.

While the crew's common spaces such as mess rooms and lounges are arranged on the main deck, the accommodation is arranged in the box-shaped deckhouse. In the Canadian Coast Guard service, Terry Fox has a complement of 10 officers and 14 crew, and 10 additional berths. The towing gear consists of an 80-ton winch holding {{convert|1500|m|yd}} of wire and a separate 200-ton double-drum anchor-handling winch. Unlike her sister ship, Terry Fox has not been retrofitted with a helideck. However, her cargo-handling capability has been increased with a 40-tonne cargo crane and a {{convert|490|m3|cuft|abbr=on}} cargo hold in place of the original bulk cargo tanks.{{cite web|url=https://inter-j01.dfo-mpo.gc.ca/fdat/vessels/vessel-details/108|title=CCG Fleet: Vessel Details: CCGS Terry Fox|publisher=Government of Canada|accessdate=5 May 2019}}

Terry Fox has a diesel-mechanical propulsion system consisting of four main engines driving two shafts through twin input-single output gearboxes. The prime movers are eight-cylinder Stork-Werkspoor 8TM410 medium-speed diesel engines producing {{convert|5800|hp|kW|abbr=on}} at 600{{nbsp}}rpm in continuous service. Each pair of main engines is coupled to a Lohmann & Stolterfoht Navilus GVE 1500 A single-stage reduction gearbox via flexible couplings designed to automatically disengage if the propellers are blocked by ice. However, each propeller shaft is also fitted with a heavy flywheel {{convert|3|m|ft|0}} in diameter and {{convert|0.6|m|ft|0}} in thickness to increase rotational inertia and absorb shocks from propeller-ice interaction. Unlike the other Canadian offshore icebreakers built in the 1980s, Terry Fox does not have a propeller nozzles to shroud her propellers. Her {{convert|4.8|m|ft|adj=on}} LIPS Canada nickel aluminium bronze controllable pitch propellers are designed to transmit {{convert|7132|kW|hp|disp=flip|abbr=on}} of power per shaft to the water and produce a combined static bollard pull of about {{convert|1590|kN|t-f}}. For onboard electricity production, the ship has two {{convert|750|kW|hp|abbr=on}} Caterpillar 3512 series ship service diesel generators and a single {{convert|200|kW|hp|abbr=on}} Caterpillar 3406 DITA emergency diesel generator. In addition, both reduction gearboxes are fitted with clutched power take-offs for 1,250{{nbsp}}kVa shaft alternators that supply power to the stern thruster and air bubbling system compressors.{{citation|title=A powerful pair of Arctic class 4 anchor handing/tug/supply ships|work=The Motor Ship|date=October 1983}}

In line with her original Canadian Arctic Shipping Pollution Prevention Regulations (CASPPR) Arctic Class 4 rating, Terry Fox is designed to break at least {{convert|4|ft|m|adj=on}} first-year level ice with a continuous speed of {{convert|3|kn}}. During icebreaking operations, the ice friction is reduced by lubricating the hull-ice interface with a {{convert|750|kW|hp|abbr=on}} low-pressure air bubbling system developed by Wärtsilä.{{citation|title=Sophisticated specification for Arctic class 4 icebreakers|date=October 1982|work=The Motor Ship}} In open water, the system can also act as a bow thruster and used for maneuvering together with the ship's single centerline rudder and a {{convert|500|hp|kW}} transverse stern thruster. When operating in ice-free waters, the ship was designed transit at an economical speed of about {{convert|14|kn}} with just two main engines, but her maximum speed is quoted as {{convert|16|kn}}.

File:CCGS TerryFox May2008.jpg

During her maiden voyage to the Arctic, Terry Fox was called in to assist the National Oceanic and Atmospheric Administration (NOAA) oceanographic survey ship Surveyor that had become beset in {{convert|4|to|5|ft|adj=on|disp=flip}} thick ice west of Point Franklin off Alaska. By the time the icebreaker arrived and freed the ship, Surveyor had been drifting with the ice pack for eight days.{{cite web|url=https://www.upi.com/Archives/1983/09/30/A-government-research-ship-stuck-eight-days-in-Arctic/4484433742400/|title=A government research ship stuck eight days in Arctic...|publisher=United Press International, Inc.|date=30 September 1983|accessdate=21 June 2023}}

Between 1983 and 1990, BeauDril's mobile drilling units drilled a total of nineteen exploratory wells in the Canadian part of the Beaufort Sea with the support of Terry Fox and other icebreaking vessels: nine with the Mobile Arctic Caisson Molikpaq and ten with the Conical Drilling Unit Kulluk. Twelve wells alone were drilled in the Amauligak prospect, the most significant oil and gas field discovered in the region, but the high expectations for the Beaufort Sea were not met: the area was characterized by a large number of small, widely scattered resources. Molikpaq was mothballed after completing the last well in 1990.Callow, L. (2013): [http://www.beaufortrea.ca/wp-content/uploads/2012/03/NCR-5358624-v4-BREA_-_FINAL_UPDATE_-_EXPLORATION_AND_ACTIVITY_FORECAST-__MAY_2013.pdf Oil and Gas Exploration & Development Activity Forecast - Canadian Beaufort Sea 2013–2028]. LTLC Consulting and Salmo Consulting Inc.Timco, G. W. and Frederking, R. (2009): [http://www.restco.ca/NRC%20CHC%20Beaufort%20Sea%20History%20Feb%202009%20%2099%20pp.pdf Overview of Historical Canadian Beaufort Sea Information]. NRC Canadian Hydraulics Centre Technical Report CHC-TR-057, February 2009.

On 1 November 1991, Terry Fox was leased to the Canadian Coast Guard for two years to replace the decommissioned {{ship|CCGS|John A. MacDonald}} during the extensive modernization of {{ship|CCGS|Louis S. St-Laurent}}. During the leasing period, the icebreaker was found to meet Canadian Coast Guard's needs satisfactorily, and the vessel was purchased from Gulf Canada Resources on 1 November 1993.{{cite book |last1=Maginley |first1=Charles D. |last2=Collin |first2=Bernard |date=2001 |title=The Ships of Canada's Marine Services |publisher=Vanwell Publishing Limited |location=St. Catharines, Ontario |isbn=1-55125-070-5|page=158}}{{cite book |editor-first=Stephen |editor-last=Saunders |date=2004 |title=Jane's Fighting Ships 2004–2005 |publisher=Jane's Information Group |location=Alexandria, Virginia |isbn=0-7106-2623-1|page=96}} Around the same time, the majority of BeauDril's fleet was purchased by Canadian Marine Drilling (Canmar), the drilling subsidiary of Dome Petroleum (later Amoco Canada) that had been Gulf Canada's main competitor in the Beaufort Sea for more than a decade.{{cite book |last=McKenzie-Brown |first=Peter |date=2006 |title=The Richness of Discovery - Amoco's First 50 Years in Canada 1948–1998 |url=http://www.24hgold.com/english/contributor.aspx?article=1966854554G10020&contributor=Peter+McKenzie-Brown|publisher=Amoco Canada Petroleum Company Ltd.|isbn=0-9684022-0-8}}

File:CCGS Terry Fox in Botwood.jpg in 2022]]

Under the Canadian Coast Guard, CCGS Terry Fox is classified as a heavy icebreaker. She is homeported in St. John's, Newfoundland and Labrador and operates in the Gulf of St. Lawrence during the winter ice season and in Canada's eastern Arctic during the summer shipping season, assisting in escorting the annual Arctic summer sealift to coastal communities.

In 2014, Terry Fox and Louis S. St-Laurent travelled to the Canadian Arctic to map the undersea continental shelf.{{cite news|url=http://www.cbc.ca/news/technology/mapping-north-pole-arctic-ocean-1.3727952|title=Research ship mapping Arctic Ocean near North Pole|newspaper=CBC News|date=20 August 2016|archiveurl=https://web.archive.org/web/20180210190241/http://www.cbc.ca/news/technology/mapping-north-pole-arctic-ocean-1.3727952|archivedate=10 February 2018|accessdate=5 May 2019}} In August, they became the first Canadian government ships to reach the North Pole in 20 years.{{cite news|url=http://www.cbc.ca/news/canada/north/two-canadian-coast-guard-icebreakers-reach-north-pole-1.2749328|title=Two Canadian Coast Guard icebreakers reach North Pole|work=CBC News|date=28 August 2014|archiveurl=https://web.archive.org/web/20180210190247/http://www.cbc.ca/news/canada/north/two-canadian-coast-guard-icebreakers-reach-north-pole-1.2749328|archivedate=10 February 2018|accessdate=5 May 2019}}

Terry Fox ran aground in April 2018 near Bide Arm but managed to return to port under her own power.{{cite web|url=https://toronto.citynews.ca/2018/06/22/feds-strike-deal-with-quebecs-chantier-davie-for-three-new-icebreakers/|title=Feds strike deal with Quebec's Chantier Davie for three new icebreakers|publisher=CityNews|date=22 June 2018|accessdate=5 May 2019}}

The vessel's port side auxiliary diesel generator was damaged by fire on 16 August 2022, putting the icebreaker out of service until mid-September of the same year.{{cite web|url=https://www.cbc.ca/news/canada/nova-scotia/generator-fire-on-board-ccgs-terry-fox-under-investigation-1.6562572|title=Generator fire on board CCGS Terry Fox under investigation|publisher=CBC/Radio-Canada|date=26 August 2022|accessdate=23 June 2023}}

In June 2023, Terry Fox was among the Canadian Coast Guard ships that was deployed in the search efforts involved in the Titan submersible implosion.{{cite web |url=https://www.cnn.com/americas/live-news/titanic-missing-sub-oceangate-06-22-23/index.html |title=Medical team arrives on the scene of the Titanic submersible rescue effort, Canadian official says |work=CNN |last=Newton |first=Paula |date=22 June 2023 |access-date=22 June 2023}}

While Terry Fox was scheduled for decommissioning already in 2020,{{citation|url=https://books.google.com/books?id=Ts7LDAAAQBAJ&pg=PA51|title=Global Challenges in the Arctic Region: Sovereignty, environment and geopolitical balance|first1=Elena|last1=Conde|first2=Sara Iglesias|last2=Sánchez|publisher=Routledge|year=2016|page=51|isbn=9781317128052}}{{cite web|url=https://canadiansailings.ca/closing-canadas-icebreaker-gap/|title=Closing Canada's icebreaker gap|date=18 March 2018|first=Joseph|last=Spears|publisher=Canadian Sailings|accessdate=5 May 2019}} she is planned to undergo an 18-month service life extension between late 2023 and spring 2025,{{cite web|url=https://www.canada.ca/en/canadian-coast-guard/news/2022/11/canadian-coast-guard-ship-terry-fox-vessel-life-extension-contract-awarded.html|title=Canadian Coast Guard Ship Terry Fox Vessel Life Extension Contract Awarded|publisher=Government of Canada|date=2 November 2022|accessdate=23 June 2023}} allowing her to remain in service until a replacement polar icebreaker built as part of the National Shipbuilding Strategy enters service.{{cite web|url=https://ised-isde.canada.ca/site/transparency/en/appearance-standing-committee-public-accounts-simon-kennedy-deputy-minister-innovation-science-and|title=Appearance before the standing Committee on Public Accounts by Simon Kennedy, Deputy Minister at Innovation, Science and Economic Development Canada – May 25, 2020|publisher=Government of Canada|date=25 May 2021|accessdate=23 June 2023}}

• History of the petroleum industry in Canada (frontier exploration and development)

{{commons category|CCGS Terry Fox (ship, 1983)|CCGS Terry Fox}}

{{reflist}}

{{Icebreakers of Canada}}

{{DEFAULTSORT:Terry Fox}}

Category:Icebreakers of the Canadian Coast Guard

Category:Ships built in North Vancouver

Category:1983 ships

Category:Terry Fox