Cupola (geometry)#Hypercupolas

{{Cupolae}}

Image:Tile 3464.svgal cupolae" in the rhombitrihexagonal tiling]]

The triangular, square, and pentagonal cupolae are the only non-trivial convex cupolae with regular faces: The "hexagonal cupola" is a plane figure, and the triangular prism might be considered a "cupola" of degree 2 (the cupola of a line segment and a square). However, cupolae of higher-degree polygons may be constructed with irregular triangular and rectangular faces.

[[File:Cupola_40.png|thumb|left|A tetracontagonal cupola has:

{{legend|blue|40 isosceles triangles;}}

{{legend|yellow|40 rectangles;}}

{{legend|red|A top regular tetracontagon;}}

and a bottom regular octacontagon (hidden).]]

The definition of the cupola does not require the base (or the side opposite the base, which can be called the top) to be a regular polygon, but it is convenient to consider the case where the cupola has its maximal symmetry, {{math|C_nv}}. In that case, the top is a regular {{mvar|n}}-gon, while the base is either a regular {{math|2n}}-gon or a {{math|2n}}-gon which has two different side lengths alternating and the same angles as a regular {{math|2n}}-gon. It is convenient to fix the coordinate system so that the base lies in the {{mvar|xy}}-plane, with the top in a plane parallel to the {{mvar|xy}}-plane. The {{mvar|z}}-axis is the {{mvar|n}}-fold axis, and the mirror planes pass through the {{mvar|z}}-axis and bisect the sides of the base. They also either bisect the sides or the angles of the top polygon, or both. (If {{mvar|n}} is even, half of the mirror planes bisect the sides of the top polygon and half bisect the angles, while if {{mvar|n}} is odd, each mirror plane bisects one side and one angle of the top polygon.) The vertices of the base can be designated {{tmath|V_1}} through {{tmath|V_{2n},}} while the vertices of the top polygon can be designated {{tmath|V_{2n+1} }} through {{tmath|V_{3n}.}} With these conventions, the coordinates of the vertices can be written as:

$$\backslash begin\{array\}\{rllcc\}$$

V_{2j-1} :& \biggl( r_b \cos\left(\frac{2\pi(j-1)}{n} + \alpha\right), & r_b \sin\left(\frac{2\pi(j-1)}{n} + \alpha\right), & 0 \biggr) \\[2pt]

V_{2j} :& \biggl( r_b \cos\left(\frac{2\pi j}{n} - \alpha\right), & r_b \sin\left(\frac{2\pi j}{n} - \alpha\right), & 0 \biggr) \\[2pt]

V_{2n+j} :& \biggl( r_t \cos\frac{\pi j}{n}, & r_t \sin\frac{\pi j}{n}, & h \biggr)

\end{array}

for {{math|1=j = 1, 2, ..., n}}.

Since the polygons {{tmath|V_1 V_ 2 V_{2n+2} V_{2n+1},}} etc. are rectangles, this puts a constraint on the values of {{tmath|r_b, r_t, \alpha.}} The distance $\backslash bigl|V\_1\; V\_2\; \backslash bigr|$ is equal to

$$\backslash begin\{align\}$$

& r_b \sqrt{ \left[\cos\left(\tfrac{2\pi}{n} - \alpha\right) - \cos \alpha\right]^2 + \left[\sin\left(\tfrac{2\pi}{n} - \alpha\right) - \sin\alpha\right]^2} \\[5pt]

=\ & r_b \sqrt{ \left[\cos^2 \left(\tfrac{2\pi}{n} - \alpha\right) - 2\cos\left(\tfrac{2pi}{n} - \alpha\right)\cos\alpha + \cos^2 \alpha \right] + \left[\sin^2 \left(\tfrac{2\pi}{n} - \alpha\right) - 2\sin\left(\tfrac{2\pi}{n} - \alpha\right) \sin\alpha + \sin^2 \alpha \right] } \\[5pt]

=\ & r_b \sqrt{ 2\left[1 - \cos\left(\tfrac{2\pi}{n} - \alpha\right) \cos\alpha - \sin\left(\tfrac{2\pi}{n} - \alpha\right)\sin\alpha \right]} \\[5pt]

=\ & r_b \sqrt{ 2\left[1 - \cos\left(\tfrac{2\pi}{n} - 2\alpha\right)\right]}

\end{align}

while the distance $\backslash bigl|\; V\_\{2n+1\}V\_\{2n+2\}\; \backslash bigr|$ is equal to

$$\backslash begin\{align\}$$

& r_t \sqrt{ \left[ \cos\tfrac{\pi}{n} - 1 \right]^2 + \sin^2 \tfrac{\pi}{n} } \\[5pt]

=\ & r_t \sqrt{ \left[ \cos^2\tfrac{\pi}{n} - 2\cos\tfrac{\pi}{n} + 1 \right] + \sin^2\tfrac{\pi}{n} } \\[5pt]

=\ & r_t \sqrt{2 \left[1 - \cos\tfrac{\pi}{n} \right]}

\end{align}

These are to be equal, and if this common edge is denoted by {{mvar|s}},

$$\backslash begin\{align\}$$

r_b &= \frac{s}{ \sqrt{2\left[1 - \cos\left(\tfrac{2\pi}{n} - 2\alpha \right) \right] }} \\[4pt]

r_t &= \frac{s}{ \sqrt{2\left[1 - \cos\tfrac{\pi}{n} \right] }}

\end{align}

These values are to be inserted into the expressions for the coordinates of the vertices given earlier.

{{Star-cupolae}}

{{Star-cupoloids}}

Star cupolae exist for any top base {{math|{{mset|n/d}}}} where {{math|6/5 < n/d < 6}} and {{mvar|d}} is odd. At these limits, the cupolae collapse into plane figures. Beyond these limits, the triangles and squares can no longer span the distance between the two base polygons (it can still be made with non-equilateral isosceles triangles and non-square rectangles). If {{mvar|d}} is even, the bottom base {{math|{{mset|2n/d}}}} becomes degenerate; then we can form a cupoloid or semicupola by withdrawing this degenerate face and letting the triangles and squares connect to each other here (through single edges) rather than to the late bottom base (through its double edges). In particular, the tetrahemihexahedron may be seen as a {{math|{{mset|3/2}}}}-cupoloid.

The cupolae are all orientable, while the cupoloids are all non-orientable. For a cupoloid, if {{math|n/d > 2}}, then the triangles and squares do not cover the entire (single) base, and a small membrane is placed in this base {{math|{{mset|n/d}}}}-gon that simply covers empty space. Hence the {{math|{{mset|5/2}}}}- and {{math|{{mset|7/2}}}}-cupoloids pictured above have membranes (not filled in), while the {{math|{{mset|5/4}}}}- and {{math|{{mset|7/4}}}}-cupoloids pictured above do not.

The height {{mvar|h}} of an {{math|{{mset|n/d}}}}-cupola or cupoloid is given by the formula:

$$h\; =\; \backslash sqrt\{1\; -\; \backslash frac\{1\}\{4\; \backslash sin^\{2\}\; \backslash left(\; \backslash frac\{\backslash pi\; d\}\{n\}\; \backslash right)\}\}.$$

In particular, {{math|1=h = 0}} at the limits {{math|1=n/d = 6}} and {{math|1=n/d = 6/5}}, and {{mvar|h}} is maximized at {{math|1=n/d = 2}} (in the digonal cupola: the triangular prism, where the triangles are upright).{{cite web|url=http://www.orchidpalms.com/polyhedra/cupolas/cupola1.html|title=cupolas|website=www.orchidpalms.com|access-date=21 April 2018}}{{cite web|url=http://www.orchidpalms.com/polyhedra/cupolas/cupola2.html|title=semicupolas|website=www.orchidpalms.com|access-date=21 April 2018}}

In the images above, the star cupolae have been given a consistent colour scheme to aid identifying their faces: the base {{math|{{mset|n/d}}}}-gon is red, the base {{math|{{mset|2n/d}}}}-gon is yellow, the squares are blue, and the triangles are green. The cupoloids have the base {{math|{{mset|n/d}}}}-gon red, the squares yellow, and the triangles blue, as the base {{math|{{mset|2n/d}}}}-gon has been withdrawn.

The hypercupolae or polyhedral cupolae are a family of convex nonuniform polychora (here four-dimensional figures), analogous to the cupolas. Each one's bases are a Platonic solid and its expansion.[http://www.bendwavy.org/klitzing/pdf/artConvSeg_8.pdf Convex Segmentochora] Dr. Richard Klitzing, Symmetry: Culture and Science, Vol. 11, Nos. 1-4, 139-181, 2000

• Orthobicupola
• Gyrobicupola
• Rotunda

{{reflist}}

• Johnson, N.W. Convex Polyhedra with Regular Faces. Can. J. Math. 18, 169–200, 1966.

• {{MathWorld |urlname=Cupola |title=Cupola}}
• [http://bendwavy.org/klitzing/explain/segmentochora.htm Segmentotopes]

{{Polyhedron navigator}}

{{Johnson solids}}

Category:Polyhedra

Category:Prismatoid polyhedra

Category:Johnson solids