EMD FP7

{{Short description|Model of 1500 hp North American diesel cab locomotive}}

{{more footnotes needed|date=July 2016}}

{{Infobox locomotive

| name = EMD FP7

| powertype = Diesel-electric

| image = WP 805A with the California Zephyr on Altamont Pass, March 1970.jpg

| caption = Western Pacific 805-A, an EMD FP7, pulls the California Zephyr in March 1970

| builder = General Motors Electro-Motive Division (EMD)
General Motors Diesel (GMD, Canada)

| buildmodel = FP7

| builddate = June 1949 – December 1953

| totalproduction = 381

| aarwheels = B-B

| uicclass = Bo'Bo'

| gauge = {{track gauge|ussg}}

| trucks = Blomberg B

| wheeldiameter = {{convert|40|in|mm|0|abbr=on}}

| minimumcurve = 23° ({{convert|251|ft|m|1|abbr=on|disp=or}} radius)

| wheelbase = {{convert|43|ft|m|2|abbr=on}}

| length = {{convert|55|ft|2+1/4|in|m|2|abbr=on}}

| width = {{convert|10|ft|8|in|m|2|abbr=on}}

| height = {{convert|15|ft|m|2|abbr=on}}

| locoweight = {{convert|260000|lb|abbr=on}}

| fuelcap = {{convert|1200|usgal|L impgal|abbr=on}}

| primemover = EMD 16-567B

| rpmrange = 800

| enginetype = Two-stroke V16 diesel

| aspiration = Roots-type supercharger

| displacement =

| generator = EMD D-12

| tractionmotors = (4) EMD D-27-B

| headendpower =

| cylindercount = 16

| cylindersize = {{convert|8+1/2|x|10|in|mm|0|abbr=on}}

| poweroutput = {{convert|1500|hp|kW}}

| tractiveeffort =

| locale = North America, Saudi Arabia

| maxspeed = {{convert|100|-|119|mph|km/h|0|abbr=on}}

}}

The EMD FP7 is a {{convert|1500|hp}}, B-B dual-service passenger and freight-hauling diesel locomotive produced between June 1949 and December 1953 by General Motors' Electro-Motive Division and General Motors Diesel. Final assembly was at GM-EMD's La Grange, Illinois plant, excepting locomotives destined for Canada, in which case final assembly was at GMD's plant in London, Ontario. The FP7 was essentially EMD's F7A locomotive extended by four feet to give greater water capacity for the steam generator for heating passenger trains.

Design

While EMD's E-units were successful passenger engines, their A1A-A1A wheel arrangement made them less useful in mountainous terrain.{{Citation needed|date=April 2009}} Several railroads had tried EMD's F3 in passenger service, but there was insufficient water capacity in an A-unit fitted with dynamic brakes. The Atchison, Topeka and Santa Fe Railway's solution was to replace the steam generators in A-units with a water tank, and so only fitted steam generators into the B-units. The Northern Pacific Railway's solution was to fit extra water tanks into the first baggage car, and to pipe the water to the engines. EMD's solution to the problem was to add the stretched FP7 to its catalog increasing the water storage capacity.

File:Amtrak San Francisco Zephyr.jpgs with the San Francisco Zephyr at Yuba Gap, 1975]]

A total of 378 cab-equipped lead A units were built; unlike the freight series, no cabless booster B units were sold. Regular F7B units were sometimes used with FP7 A units, since they, lacking cabs, had more room for water and steam generators. The FP7 and its successor, the FP9, were offshoots of GM-EMD's highly successful F-unit series of cab unit freight diesel locomotives.

F3s, F7s, and F9s equipped for passenger service are not FP-series locomotives, which, although similar in appearance, have distinctive differences. This includes, but not limited to, the greater body length. The extra {{convert|4|ft|m|abbr=on}} of length was added behind the first body-side porthole, and can be recognised by the greater distance between that porthole and the first small carbody filter grille. The corresponding space beneath the body, behind the front truck, was also opened up; this either remained an empty space or was filled with a distinctive water tank shaped like a barrel mounted transversely.{{cite book |last1=Foster |first1=Gerald L. |title=A field guide to trains of North America |date=1996 |publisher=Houghton Mifflin |location=Boston |isbn=0-395-70112-0 |page=98}}

Over their production run, there were numerous detail changes including the style of side grills (notably on Canadian-built units), carbody louvres, and dynamic brake fan sizing ({{cvt|36|in|m|disp=sqbr}} initially, {{cvt|48|in|m|disp=sqbr}} on later production units). Some railroads such as Southern Pacific and Canadian Pacific outfitted their units with rooftop-mounted icicle breakers for protecting dome car windows in mountain territory where icicles formed around the roofs of tunnels.

Original owners

EMD built 378 FP7 locomotives. Major buyers included the Louisville and Nashville Railroad (45), Atlantic Coast Line Railroad (44), Pennsylvania Railroad (40), Canadian Pacific Railway (35), and Milwaukee Road (32).{{sfnp|Cook|2015a|p=31}} Locomotives intended for use in Canada were built by General Motors Diesel, EMD's Canadian subsidiary. These included the Canadian Pacific's units,{{sfnp|Wilson|2017|p=175}} and 22 for the Ontario Northland Railway.

Preserved examples

File:RDG-902-on-display-track-May-2012.jpg at Steamtown National Historic Site]]

File:CP4038Minnedosa.png 4038 in Minnedosa, Manitoba]]

See also

References

= Notes =

{{reflist}}

= Bibliography =

  • {{cite magazine | last=Cook | first=Preston |title=F Units, T to 9 | magazine=Classic Trains | date=Spring 2015 | pages=20–35 | issn=1527-0718 | ref={{harvid|Cook|2015a}} }}
  • {{Dorin-North Western|pages=123–127}}
  • {{Lamb-Evolution}}
  • {{Marre-diesel-50}}
  • {{Pinkepank diesel spotters guide 2}}
  • {{Schafer-Vintage Diesel}}
  • {{Solomon-American Diesel}}
  • {{Solomon-EMD F-Unit}}
  • {{Solomon-EMD Locomotives}}
  • {{Solomon-Vintage Diesel}}
  • {{Solomon-Electro-Motive}}
  • {{Solomon-North American Locomotives}}
  • {{Wilson-F Units}}
  • {{Wilson-Guide}}
  • EMD Product Reference Data Card dated January 1, 1959 has the 567BC and 567C engine data used in the as-built roster.