PlayStation 2 Expansion Bay#Hard disk drive

{{short description|3.5" drive bay for the PlayStation 2}}

{{Use mdy dates|date=August 2021}}

{{More citations needed|date=October 2013}}

File:PS2-Fat-Console-Back.jpg

The PlayStation 2 Expansion Bay is a 3.5-inch drive bay of the PlayStation 2 gaming console that was introduced with the model 30000 and 50000 (replacing the PCMCIA slot used in the models 10000, 15000 and 18000, and removed with the slimline model 70000). The bay is designed for the network adaptor and internal hard disk drive (HDD). These peripherals enhance the capabilities of the PS2 to allow online play and other features that were shown at E3 2001.

Network Adaptor

{{See also|PlayStation 2 online functionality#Adapter|List of PlayStation 2 network games}}

{{multiple image

| align = right

| direction = vertical

| width = 200

| image1 = Sony-PlayStation-2-Network-Adaptor-Front.jpg

| image2 = PS2-Fat-Console-Back-Ntwrk.jpg

| footer = A PS2 Network Adaptor shown by itself (top) and inserted to a console (bottom)

}}

The Network Adaptor was released together with the launch of the PlayStation 2's online play service. Two models of the adaptor were available - one with a dial-up modem and an Ethernet jack for broadband Internet connection (mainly sold in North America), and one with only an Ethernet interface (sold in Europe and other regions). A start-up disc ("Network Access Disc") is included with the Network Adaptor and installs a file on the memory card for connection settings which are accessible by all but one Network Adaptor compatible game. Tony Hawk's Pro Skater 3, released in November 2001, supported the Network Adapter hardware, but not the software as it was not finalized until much later.

The Network Adaptor also provides a Parallel ATA interface and a Molex disk drive power connector to allow installation of a 3.5" IDE hard disk drive in the expansion bay. The two disk connectors are on separate circuit boards from the main Network Adaptor one.

Slimline PlayStation 2 models have an Ethernet port built-in (with some early North American models including an analog dial-up modem), but no official hard disk drive interface. The first slimline model (SCPH-70000) has a complete Network Adapter on board and may be modified to add an external IDE connector board. From the SCPH-75000 series onwards, Ethernet functionality is integrated into the I/O processor (which was completely redesigned internally),{{cite web|author=SP193|title=The PlayStation 2 Busses + DEV9|url=https://assemblergames.com/threads/the-playstation-2-busses-dev9.67961/|website=ASSEMbler - Home of the obscure|access-date=May 5, 2018|language=en|date=December 31, 2017|archive-date=May 6, 2018|archive-url=https://web.archive.org/web/20180506035247/https://assemblergames.com/threads/the-playstation-2-busses-dev9.67961/|url-status=dead}} completely removing the disk interface.

The maximum supported rate of the Network Adapter is 100 Mbit/s, at full duplex. It is backwards compatible with 10 Mbit/s hardware and configurations.{{Cite web|url=http://www.playstation.com/manual/pdf/SCPH-10281.pdf|title=Sony Network Adaptor (Ethernet/modem) (for PlayStation 2) manual (SCPH-10281/97043)|access-date=February 4, 2023|archive-date=November 9, 2019|archive-url=https://web.archive.org/web/20191109182137/http://www.playstation.com/manual/pdf/SCPH-10281.pdf|url-status=dead}}

Hard Disk Drive

File:Sony-PlayStation-2-Hard-Drive-wNetwork-Adaptor.jpg

The PlayStation 2 Hard Disk Drive (PS2 HDD) was released on July 19, 2001, in Japan (together with the Network Adaptor), in Europe on May 22, 2002 (together with the Linux Kit), and in North America on March 23, 2004 (together with Final Fantasy XI). It requires the Network Adaptor to connect to the PlayStation 2 and to receive power. The HDD has a 40 GB capacity that can be used by games to reduce load time by putting data on the hard drive temporarily, installing downloadable content, or to transfer backup game save data from memory cards. IBM, Maxtor and Seagate produced hard drives used in these kits.

Due to MagicGate copyright protection, programs that are bootable directly from the HDD (e.g. PlayStation Broadband Navigator, PlayOnline Viewer, Central Station) are keyed to the system when that system installs them. The HDD can be transferred to another PlayStation 2 system and files on the HDD can be accessed, but those specific programs cannot be booted without being reinstalled. Contrary to popular belief, a complete reformat of the HDD is not necessary upon transfer of the HDD between consoles, or else it would not be useful to have the HDD be preformatted and have preinstalled software, as is the case with the North American HDD unit. An HDD Utility Disc is included to allow maintenance of the HDD (including defragmentation, disk repair and formatting utilities, along with a file manager browser) and in North America, Final Fantasy XI is also included. There are 35 North American games that support the HDD.

Unofficial software such as HD Loader (and later HD Advance and Open PS2 Loader (OPL)) allows users to copy entire games to the HDD and run them without the discs. They also allowed using some standard consumer hard drives with the PS2, however they will not be compatible with software expecting the standard PS2 hard drive. These softwares combined with a hard drive allows one to play games without using the original disc. This is desirable as it protects the fragile (and perhaps rare) game discs from harm, and in some cases, may improve performance. It is not without controversy, however; the aforementioned HD Loader software for example bypasses the usual copy-protection mechanisms built into the console, leading to piracy.

=North American and European releases with HDD support=

  • ESPN NFL 2K5, NBA 2K5, ESPN College Hoops 2K5, ESPN MLB 2K5, and ESPN NHL 2K5 use the HDD to improve replays. (If the HDD is not installed, static screenshots are shown as replays. With the HDD, full cutscene-like replays can be displayed). ESPN NHL 2K5 has the ability to save files directly to the hard drive
  • Final Fantasy XI is the only North American-released game truly dependent on the HDD as it requires various patches and upgrades from Square Enix.
  • Metal Saga installs 1.7 GB to the HDD to decrease load time and uses the HDD to save/load game instead of Memory Card
  • MLB 2K6, 2K7, 2K8, 2K9, 2K10, 2K11 and 2K12 support saving to the HDD as well as the automatic installation of data for faster loading.{{ref|2Ksports|†}}
  • NHL 2K6, 2K7, 2K8, 2K9 and 2K10 support saving to the HDD.{{ref|2Ksports|†}}
  • RPG Maker 3 installs 3 GB to the HDD to decrease load times.
  • Resident Evil Outbreak (both, the original game and File #2) installs 1 GB to the HDD for reduced loading times.
  • SOCOM 3 U.S. Navy SEALs supports additional maps, downloadable via the in game "Socom Store".
  • SOCOM II U.S. Navy SEALs supports additional maps. However, the files must be copied from a magazine demo disc to the hard drive and cannot be downloaded.
  • SOCOM U.S. Navy SEALs: Combined Assault supports additional maps.
  • Street Fighter Alpha Anthology, like its Japanese counterpart, can install 2 GB to the HDD to reduce loading time.
  • The Urbz: Sims in the City recognizes when the HDD is installed and allows data to be saved directly to it. Also uses a 512 MB "__tmp" Partition to cache Game Files to speed up load times.
  • The Sims 2 recognizes when the HDD is installed and allows data to be saved directly to it. Also uses a 512 MB "__tmp" Partition to cache Game Files to speed up load times.

{{note|2Ksports|†}} 2K sports titles up to the 2K9 versions (except College Hoops, where it only applies to 2K6, 2K7 and 2K8 versions since there is no 2K9), also use the HDD to display recorded replays from game action. Without it, stills are shown in NBA games (during halftime and the end of the game) and no end-of-inning replays are shown in MLB.

File:NTSC-UC HDD Package.JPG

=Japanese releases with HDD support=

Linux Kit

{{main|Linux for PlayStation 2}}

The Linux Kit for PlayStation 2 was released in 2002 and included the PlayStation 2 Linux software, keyboard, mouse, VGA adapter (which requires an RGB monitor that supports sync-on-green signals), Network Adaptor (Ethernet only) and a 40 GB hard disk drive. It allows the PlayStation 2 to be used as a personal computer.

Hacking and modding

{{main|PlayStation 2 homebrew}}

Since the mid-2010s, it is possible to install and use the PlayStation BB Navigator (PS-BBN) and the HDD-OSD (HDD Utility-Disc) on every PlayStation 2 Console from every region. This can be achieved with the use of special "patched" files for the HDD-OSD, PS-BBN, and a modified version of "uLaunch" (a well-known piece of PlayStation 2 homebrew software) called "hacked-ule". It is now also possible to install homebrew software to the HDD and make it launchable through the HDD-OSD and PS-BBN's "Game-Channel", just like any other official HDD game. However, installing such homebrew software to the HDD still requires much work in a Hex-Editor. PS-BBN can now also be fully translated into any given language; the translation process involves the use of the "Beta-linux" release for PlayStation 2 and a specially compiled kernel which gives access to the "APA-ReiserFS" partitions.

{{asof|2013}}, most (if not all) games that use the HDD to install data (to decrease load time) and/or to save/load (instead of using a Memory Card) can be used on any PlayStation 2 console from any region and on any HDD by using a Hex-Editor (or ATADPatcher v0.02) and some type of booting software such as "ESR" (another well-known piece of PlayStation 2 homebrew software). If a "patched" copy of HDD-OSD and/or PlayStation BB Navigator (PS-BBN) is used, users can see all the data currently installed in the same way as with the official PS2 hard drive ("SONY 40 GB HDD", SCPH-20401).

References

{{reflist}}