SPCA 30

File:SPCA_III_L'Aerophile_February_1931.jpg

During 1928, the French Service Technique de l'Aéronautique (the government body responsible for producing specifications for aircraft for the French armed forces) drew up requirements for a four-seat Multiplace de Combat, a multi-role aircraft capable of day and night bombing, reconnaissance and long–range escort duties.{{harvnb|Green|1967|pp=76–77}} In response, SPCA designed an all-metal twin boom low wing monoplane, the SPCA 30, the only twin boom aircraft entered into the contest. The aircraft's central fuselage had two open cockpits offset to port, and a machine gun mount in the nose, while two more machine gun mounts were in the tailbooms.{{harvnb|Liron|1989|p=42}} This arrangement of its firing stations, which left no field uncovered by defensive fire, was intended to permit the aircraft to effectively defend itself from would-be attackers. In particular, the effectiveness of its downwards firing arcs was bolstered by the narrowness of the fuselages.NACA 1932, p. 1.

The SPCA 30 employed all-metal construction, which enabled it to fly under virtually all weather conditions. Many elements of the aircraft were designed to be readily demountable and, where feasible to do so, interchangeable; this eased maintenance and repair tasks. When configured for this role, it could be fully equipped to function as a day or night bomber. It was even envisioned for use as a heavy fighter, for which it was intended to escort bombardment squadrons and carry out aerial observation. One of the more unusual features of the SPCA 30 was the ability to install and remove a detachable cabin from the underside of the fuselage. While the aircraft was on the ground, the cabin was to be detached and towed away by a tractor. It was suggested that this function would be useful in the air ambulance role.NACA 1932, pp. 1, 7.

The aircraft was furnished with a cantilever wing that comprised three separate sections, all of which were demountable. Specifically, there was a central section of uniform section that supported the cabin, fuselages, engine bearers, and landing gear; the central section was joined to the two lateral sections via a total of four bolts each. The wing covering was composed wholly of corrugated sheet metal and was reinforced internally using additional metal sections. Multiple panels across this covering were attached using screws that permitted rapid removal for ease of inspection of elements within the wing’s interior, such as the supports for the flight controls.NACA 1932, p. 2.

The wing’s structural elements comprised a pair of lattice girder spars which had a uniform height across the central section but progressively tapered in the lateral section. Each spar flange consisted of a pair of continuous semi-cylindrical duralumin plates and a U-shaped member that was riveted together as to form an almost circular cross section. These flanges tapered uniformly across the lateral wing sections so that they formed elongated cones. The spar webs were formed by box cross section lattices. The covering of the wing was supported directly by the ribs, which conformed to a lattice girder style. Rigid triangular bracing in the planes of the upper and lower spar flanges, the bracing members being extruded in the form of omega. The ailerons were hinged to auxiliary lattice spars.

The central portion of the wing was attached to the two fuselages by no more than four bolts each. The framework of each fuselage consisted of a pair of triangularly-braced girders that joined at intervals to transverse frames. The fuselage covering was smooth sheet metal. Both the floor and ceiling of the fuselages were reinforced using stringers that ran throughout their whole length. Each fuselage contained a central corridor that connected the machine gun station, the engine compartment and the central cabin.

The central cabin was extended by a balcony that projected roughly 13 foot in front of the wing, it shared a similar structure to that of the fuselages. It had a continuous floor that was interrupted by a trapdoor (used for access) as well as a series of other openings that were used either by the navigator or the aerial observer. The cabin was divided lengthwise into two separates compartments by a partition with a connecting door. The forward compartment accommodated for the chief observer, being furnished with all of the requisite instruments for navigation, observation, and bombardment, as well as a single ring mount for a machine gun. The aft compartment contained the two pilot stations, which were arranged in tandem and provided with dual flight control and supported by a pair of raised girders. Each station could be disconnected by the pilot of the other station. The flight controls were rigid and are mounted on ball bearings. The supporting frame for the bomb rack was positioned between the spars of the central part of the wing within the lowest point of the aft compartment; this frame was also able to function as a camera support during photographic missions.

The horizontal stabilizer connected the two fuselages with an overhang at each end. The elevator was mounted on ball bearings. The vertical empennage comprised a fin and a rudder at the tail of each fuselage. Both the horizontal stabilizer and vertical empennage shared an identical structure to that the wing.

The landing gear was composed of two independent symmetrical parts, each being fitted with a special steel axle, a tube of variable thickness attached by a ball-and-socket joint to the lower flange of the front spar of the central section of the wing under the side of the cabin.NACA 1932, pp. 2-3. An oblique fore-and-aft steel strut was attached to the lower flange of the rear wing spar under the centre of each fuselage. A vertical strut provided with a Messier-supplied oleo-pneumatic shock absorber was attached to the lower flange of the front spar beneath the centre of the engine bearer.NACA 1932, p. 3. The lower ends of these three members were joined to form a trihedral; at the apex of this trihedral and constituting the end of the axle, there was a spindle that carried a wheel. Each fuselage carried a swivelling tail skid that was furnished with a Messier oleo-pneumatic shock absorber.

Fuel was housed within a pair of protected drop fuel tanks, composed of L2R alloy, that were located inside the central part of the wings, one on either side of the cabin. The fuel system enables each engine to be supplier from either or both of these tanks. Dependent on the engine used, radiators fitted were either of the frontal honeycomb style or retractable plate-type radiators located in the leading edge of the wing.

During late 1930, a pair of prototypes were completed. The first one, registration F-AKCA was powered by a pair of {{convert|650|hp|kW|abbr=on|0|disp=flip}} Lorraine-Dietrich 18Kd water-cooled W engines engines, and made its first flight on 1 February 1931.{{harvnb|Liron|1989|pp=42–43}}[http://www.aviafrance.com/s-p-c-a-30-aviation-france-4566.htm Aviafrance S.P.C.A. 30] On 7 August, F-AKCA was being demonstrated at Villacoublay airfield when the aircraft suffered severe vibration when the engines were brought back to full power, with the tailbooms being displaced by more than a metre, leading to tearing of the skin of the aircraft's tailbooms. Despite the damage, the pilot managed to land the aircraft. The accident was eventually found to be due to flutter, caused by weakness of the wings in torsion (i.e. twisting), which was exacerbated by the unbalanced control surfaces.{{harvnb|Liron|1989|pp=43–44}} The second prototype, F-AKCB, with two 650 hp Hispano-Suiza 12Nb engines, flew on 6 May 1933.{{harvnb|Liron|1989|pp=42, 45}} The original bulky landing gear was later replaced by a lighter one.

The SPCA 30, together with other competing aircraft such as the Blériot 137 and the Breguet 410, were rejected in favour of Amiot's proposal, the Amiot 140,{{harvnb|Green|1967|p=77}} which later entered production as a five-seat night bomber, the Amiot 143.{{harvnb|Green|1967|pp=77, 79}}

File:SPCA_30_M4_3-view_NACA-AC-171.png

{{Aircraft specs

|ref= Parmentier,{{cite web |last=Parmentier |first=Bruno |title=SPCA30 |url=http://www.aviafrance.com/aviafrance1.php?ID=4566&ID_CONSTRUCTEUR=1146&ANNEE=0&ID_MISSION=0&MOTCLEF= |publisher=Aviafrance |access-date=11 November 2012}} National Advisory Committee for AeronauticsNACA 1932, pp. 3-8.

|prime units?= met

|genhide=

|crew= four

|capacity=

|length m= 17

|length ft=

|length in=

|length note=

|span m= 26.5

|span ft=

|span in=

|span note=

|height m= 4.10

|height ft=

|height in=

|height note=

|wing area sqm= 100

|wing area sqft=

|wing area note=

|airfoil=

|empty weight kg= 1,750

|empty weight lb=

|empty weight note=

|gross weight kg= 6,500

|gross weight lb=

|gross weight note=

|max takeoff weight kg=

|max takeoff weight lb=

|max takeoff weight note=

|fuel capacity=

|more general=

|eng1 number= 2

|eng1 name= Lorraine-Dietrich 18Kd

|eng1 type= W-18 water-cooled piston engines

|eng1 kw=

|eng1 hp= 650

|eng1 shp=

|eng1 note=

|power original=

|prop blade number=

|prop name=

|prop dia m=

|prop dia ft=

|prop dia in=

|prop dia note=

|perfhide=

|max speed kmh= 255

|max speed mph=

|max speed kts=

|max speed note=

|cruise speed kmh=

|cruise speed mph=

|cruise speed kts=

|cruise speed note=

|stall speed kmh=

|stall speed mph=

|stall speed kts=

|stall speed note=

|never exceed speed kmh=

|never exceed speed mph=

|never exceed speed kts=

|never exceed speed note=

|minimum control speed kmh=

|minimum control speed mph=

|minimum control speed kts=

|minimum control speed note=

|range km= 650

|range miles=

|range nmi=

|range note=

|combat range km=

|combat range miles=

|combat range nmi=

|combat range note=

|ferry range km=

|ferry range miles=

|ferry range nmi=

|ferry range note=

|endurance=

|ceiling m= 7,500

|ceiling ft=

|ceiling note=

|climb rate ms=

|climb rate ftmin=

|climb rate note=

|time to altitude={{convert|2,000|m|ft|abbr=on}} in six minutes

|wing loading kg/m2=

|wing loading lb/sqft=

|wing loading note=

|disk loading kg/m2=

|disk loading lb/sqft=

|fuel consumption kg/km=

|fuel consumption lb/mi=

|power/mass=

|more performance=

|armament=

|guns=

|bombs=

|rockets=

|missiles=

|hardpoints=

|hardpoint capacity=

|hardpoint rockets=

|hardpoint missiles=

|hardpoint bombs=

|hardpoint other=

|avionics=

}}

{{aircontent

|see also=

|related=

|similar aircraft=

• Amiot 143
• Blériot 137
• Breguet 410
• SAB AB-80

|lists=

• List of Interwar military aircraft

}}

{{reflist}}

• {{cite book |last=Green |first= William |title=War Planes of the Second World War: Volume 7, Bombers and Reconnaissance Aircraft |year=1967 |location=London, UK |publisher=Macdonald}}
• {{cite magazine |last=Liron |first=Jean |title=Les SPCA: Le SPCA III type 30 |magazine=Le Fana de l'Aviation |date=August 1989 |issue=237 |pages=42–45 |language=Fr}}
• [https://ntrs.nasa.gov/citations/19930090475 "The S.P.C.A. 30 M.4 military airplane (French) : a multiplace low-wing airplane"] National Advisory Committee for Aeronautics, 1 September 1932. NACA-AC-171, 93R19765.

{{Commons category|SPCA III}}

• [http://www.flickriver.com/photos/27862259@N02/6184218619/ Picture]
• [http://airspot.ru/catalogue/aircrafts/S?page=21 Airspot (in Russian)]
• [http://www.traditions-air.fr/unit/photo/div_unit_inconnu_bombardement.htm Bombardement Reconnaissance - unités à identifier]

{{SPCA aircraft}}

Category:1930s French bomber aircraft

Category:SPCA aircraft

Category:Twin-boom aircraft

Category:Low-wing aircraft

Category:Aircraft first flown in 1931

Category:Twin piston-engined tractor aircraft

Category:Aircraft with fixed conventional landing gear