South African type XF2 tender

{{Use dmy dates|date=March 2016}}

{{Use South African English|date=March 2016}}

{{Infobox steam tender

| name = South African type XF2 tender

| image = SAR Class Exp 5 948 (2-8-2) CGR Class 9 840 Works 4341.jpg

| alt =

| imagesize =

| caption = Type XF2 (7½ LT) on CGR 9th Class, c. 1906

| hatnote = ♠ 7½ long tons coal capacity
{{font color|red|♥}} 10 long tons coal capacity

| locomotive = ♠ CGR 9th Class of 1906
{{font color|red|♥}} CGR 10th Class

| designer = Cape Government Railways
(H.M. Beatty)

| builder = Kitson and Company

| worksnumber =

| serialnumber =

| date = 1906

| rebuiltfrom =

| rebuilder =

| rebuilddate =

| rebuiltto =

| wheelarr = 2-axle bogies

| gauge = {{Track gauge|Cape|allk=on}}

| length = {{convert|23|ft|7+7/8|in|mm|0|abbr=on}}

| bogies =

| wheeldiameter = {{convert|33+1/2|in|mm|0|abbr=on}} as built
{{convert|34|in|mm|0|abbr=on}} retyred

| wheelbase = {{convert|16|ft|1|in|mm|0|abbr=on}}

| bogie = {{convert|4|ft|7|in|mm|0|abbr=on}}

| axleload = ♠ {{convert|9|lt|11|lcwt|kg|sigfig=4|abbr=on}}
{{font color|red|♥}} {{convert|10|lt|18|lcwt|kg|sigfig=4|abbr=on}}

| bogieload =

| bogie 1 = ♠ {{convert|19|lt|2|lcwt|kg|sigfig=4|abbr=on}}
{{font color|red|♥}} {{convert|20|lt|8|lcwt|kg|sigfig=4|abbr=on}}

| bogie 2 = ♠ {{convert|20|lt|12|lcwt|kg|sigfig=4|abbr=on}}
{{font color|red|♥}} {{convert|21|lt|16|lcwt|kg|sigfig=4|abbr=on}}

| axle 1 =

| axle 2 =

| axle 3 =

| axle 4 =

| axle 5 =

| axle 6 =

| tenderempty = {{convert|42128|lb|kg|abbr=on}}

| tenderworking = ♠ {{convert|39|lt|14|lcwt|kg|sigfig=4|abbr=on}}
{{font color|red|♥}} {{convert|42|lt|4|lcwt|kg|sigfig=4|abbr=on}}

| fueltype = Coal

| fuelcap = ♠ {{convert|7|lt|10|lcwt|t|1|abbr=on}}
{{font color|red|♥}} {{convert|10|lt|t|1|abbr=on}}

| watercap = ♠{{font color|red|♥}} {{convert|3000|impgal|L|sigfig=3|abbr=on}}

| stoking = Manual

| coupling = Drawbar & Johnston link-and-pin

| operator = Cape Government Railways
South African Railways

| fleetnumbers = ♠ SAR 948 - {{font color|red|♥}} SAR 1244

| nicknames =

| notes =

}}

{{main article|South African steam locomotive tenders}}

The South African type XF2 tender was a steam locomotive tender from the pre-Union era in the Cape of Good Hope.

Two Type XF2 tenders entered service in 1906, as tenders to the {{nowrap|9th Class}} {{nowrap|2-8-2}} Mikado type and {{nowrap|10th Class}} {{nowrap|4-8-0}} Mastodon type experimental steam locomotives, of which one each were acquired by the Cape Government Railways in that year. The two tenders were not identical.{{Holland-Vol 1|pages=72-74}}South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 43.South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 43.

Manufacturer

Both Type XF2 tenders were built in 1906 by Kitson and Company.

The tenders entered service as tenders to the CGR 9th Class and CGR 10th Class of 1906, both experimental locomotives. The locomotives and tenders were designed by H.M. Beatty, the Chief Locomotive Superintendent of the Cape Government Railways (CGR), at the Salt River works in Cape Town.

Characteristics

The two tenders were not identical. The tender of the 9th Class had a coal capacity of {{convert|7|lt|10|lcwt|t|1|abbr=off}} and a maximum axle load of {{convert|9|lt|11|lcwt|kg|sigfig=4|abbr=off}}, while the tender of the 10th Class had a coal capacity of {{convert|10|lt|t|1|abbr=off}} and a maximum axle load of {{convert|10|lt|18|lcwt|kg|sigfig=4|abbr=off}}. Both had a water capacity of {{convert|3000|impgal|L|sigfig=3|abbr=off}}.

Locomotives

On the South African Railways (SAR) roster, the two locomotives were designated Classes Experimental 5 and Experimental 6 respectively in 1912. In the SAR years, tenders were numbered for the engines they were delivered with. In most cases, an oval number plate, bearing the engine number and often also the tender type, would be attached to the rear end of the tender. During the classification and renumbering of locomotives onto the SAR roster in 1912, no separate classification and renumbering list was published for tenders, which should have been renumbered according to the locomotive renumbering list.Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)

File:SAR Class Exp 6 1244 (4-8-0) CGR Class 10 880 Works 4375.jpg, c. 1906]]

Only these two experimental locomotives were delivered new with Type XF2 tenders and were renumbered to the SAR numbers as shown.

Classification letters

Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR. The first letter of the tender type indicates the classes of engines to which it can be coupled. The "X_" tenders could be used with the following locomotive classes:

The second letter indicates the tender's water capacity. The "_F" tenders had a capacity of {{convert|3000|impgal|sigfig=3|abbr=off}}.

A number, when added after the letter code, usually indicates differences between similar tender types, such as function, wheelbase or coal bunker capacity.

References

{{Reflist|30em}}

{{Steam locomotive tenders}}

{{Locomotives of the Cape Government Railways}}

{{Locomotives of South Africa}}

XF2