sulfate

{{see|American and British English spelling differences}}

"Sulfate" is the spelling recommended by IUPAC, but "sulphate" was traditionally used in British English.

The sulfate anion consists of a central sulfur atom surrounded by four equivalent oxygen atoms in a tetrahedral arrangement. The symmetry of the isolated anion is the same as that of methane. The sulfur atom is in the +6 oxidation state while the four oxygen atoms are each in the −2 state. The sulfate ion carries an overall charge of −2 and it is the conjugate base of the bisulfate (or hydrogensulfate) ion, {{chem2|HSO4-}}, which is in turn the conjugate base of {{chem2|H2SO4}}, sulfuric acid. Organic sulfate esters, such as dimethyl sulfate, are covalent compounds and esters of sulfuric acid. The tetrahedral molecular geometry of the sulfate ion is as predicted by VSEPR theory.

File:Sulfate covalent-ionic.svg bonds only; 2 with an ionic bond]]Image:Sulfate-resonance-2D.png

The first description of the bonding in modern terms was by Gilbert Lewis in his groundbreaking paper of 1916, where he described the bonding in terms of electron octets around each atom. There are two double bonds, and there is a formal charge of +2 on the sulfur atom and -1 on each oxygen atom.{{cite journal|title=The Atom and the Molecule|first=Gilbert N.|last=Lewis|author-link=Gilbert N. Lewis|journal=J. Am. Chem. Soc.|volume=38|date=1916|issue=4|pages=762–785|url=http://osulibrary.oregonstate.edu/specialcollections/coll/pauling/bond/papers/corr216.3-lewispub-19160400-18-large.html|doi=10.1021/ja02261a002|s2cid=95865413 }} (See page 778.){{efn|Lewis assigned to sulfur a negative charge of two, starting from six own valence electrons and ending up with eight electrons shared with the oxygen atoms. In fact, sulfur donates two electrons to the oxygen atoms.|name=formal charge}}

Later, Linus Pauling used valence bond theory to propose that the most significant resonance canonicals had two pi bonds involving d orbitals. His reasoning was that the charge on sulfur was thus reduced, in accordance with his principle of electroneutrality.{{cite journal|title=The modern theory of valency|first=Linus|last=Pauling|author-link=Linus Pauling|journal=J. Chem. Soc.|date=1948|volume=17|pages=1461–1467|doi=10.1039/JR9480001461|pmid=18893624|url=https://authors.library.caltech.edu/59671/}} The S−O bond length of 149 pm is shorter than the bond lengths in sulfuric acid of 157 pm for S−OH. The double bonding was taken by Pauling to account for the shortness of the S−O bond.

Pauling's use of d orbitals provoked a debate on the relative importance of pi bonding and bond polarity (electrostatic attraction) in causing the shortening of the S−O bond. The outcome was a broad consensus that d orbitals play a role, but are not as significant as Pauling had believed.{{cite journal|first=C. A.|last=Coulson|title=d Electrons and Molecular Bonding|journal=Nature|volume=221|page=1106|date=1969|issue=5186|doi=10.1038/2211106a0|bibcode=1969Natur.221.1106C|s2cid=4162835}}{{cite journal|first=K. A. R.|last=Mitchell|title=Use of outer d orbitals in bonding|journal=Chem. Rev. |volume=69|page=157|date=1969|issue=2|doi=10.1021/cr60258a001}}

A widely accepted description involving pπ – dπ bonding was initially proposed by Durward William John Cruickshank. In this model, fully occupied p orbitals on oxygen overlap with empty sulfur d orbitals (principally the d_z² and d_x²–y²). However, in this description, despite there being some π character to the S−O bonds, the bond has significant ionic character. For sulfuric acid, computational analysis (with natural bond orbitals) confirms a clear positive charge on sulfur (theoretically +2.45) and a low 3d occupancy. Therefore, the representation with four single bonds is the optimal Lewis structure rather than the one with two double bonds (thus the Lewis model, not the Pauling model).{{cite journal|first1=Thorsten|last1=Stefan|first2=Rudolf|last2=Janoschek|title=How relevant are S=O and P=O Double Bonds for the Description of the Acid Molecules H₂SO₃, H₂SO₄, and H₃PO₄, respectively?|journal=J. Mol. Modeling|volume=6|issue=2|date=Feb 2000|pages=282–288|doi=10.1007/PL00010730|s2cid=96291857}}

In this model, the structure obeys the octet rule and the charge distribution is in agreement with the electronegativity of the atoms. The discrepancy between the S−O bond length in the sulfate ion and the S−OH bond length in sulfuric acid is explained by donation of p-orbital electrons from the terminal S=O bonds in sulfuric acid into the antibonding S−OH orbitals, weakening them resulting in the longer bond length of the latter.

However, Pauling's representation for sulfate and other main group compounds with oxygen is still a common way of representing the bonding in many textbooks.{{cite book|author1-link=F. Albert Cotton|last1=Cotton|first1=F. Albert|author2-link=Geoffrey Wilkinson|last2=Wilkinson|first2=Geoffrey|date=1966|title=Advanced Inorganic Chemistry|edition=2nd|location=New York, NY|publisher=Wiley}} The apparent contradiction can be clarified if one realizes that the covalent double bonds in the Lewis structure actually represent bonds that are strongly polarized by more than 90% towards the oxygen atom. On the other hand, in the structure with a dipolar bond, the charge is localized as a lone pair on the oxygen.

Typically metal sulfates are prepared by treating metal oxides, metal carbonates, or the metal itself with sulfuric acid:{{Greenwood&Earnshaw}}

:{{chem2 | Zn + H2SO4 -> ZnSO4 + H2 }}

:{{chem2 | Cu(OH)2 + H2SO4 -> CuSO4 + 2 H2O }}

:{{chem2 | CdCO3 + H2SO4 -> CdSO4 + H2O + CO2 }}

Although written with simple anhydrous formulas, these conversions generally are conducted in the presence of water. Consequently the product sulfates are hydrated, corresponding to zinc sulfate {{chem2|ZnSO4*7H2O}}, copper(II) sulfate {{chem2|CuSO4*5H2O}}, and cadmium sulfate {{chem2|CdSO4*H2O}}.

Some metal sulfides can be oxidized to give metal sulfates.

There are numerous examples of ionic sulfates, many of which are highly soluble in water. Exceptions include calcium sulfate, strontium sulfate, lead(II) sulfate, barium sulfate, silver sulfate, and mercury sulfate, which are poorly soluble. Radium sulfate is the most insoluble sulfate known. The barium derivative is useful in the gravimetric analysis of sulfate: if one adds a solution of most barium salts, for instance barium chloride, to a solution containing sulfate ions, barium sulfate will precipitate out of solution as a whitish powder. This is a common laboratory test to determine if sulfate anions are present.

The sulfate ion can act as a ligand attaching either by one oxygen (monodentate) or by two oxygens as either a chelate or a bridge. An example is the complex {{chem2|Co(en)2(SO4)]+Br−}} or the neutral metal complex {{chem2|PtSO4(PPh3)2]}} where the sulfate ion is acting as a bidentate ligand. The metal–oxygen bonds in sulfate complexes can have significant covalent character.

File:Objectes de la Sala Horta i Marjal (27190138015).jpg.]]

Sulfates are widely used industrially. Major compounds include:

• Gypsum, the natural mineral form of hydrated calcium sulfate, is used to produce plaster. About 100 million tonnes per year are used by the construction industry.
• Copper sulfate, a common algaecide, the more stable form (Copper(II) sulfate) is used for galvanic cells as electrolyte
• Iron(II) sulfate, a common form of iron in mineral supplements for humans, animals, and soil for plants
• Magnesium sulfate (commonly known as Epsom salts), used in therapeutic baths
• Lead(II) sulfate, produced on both plates during the discharge of a lead–acid battery
• Sodium laureth sulfate, or SLES, a common detergent in shampoo formulations
• Polyhalite, {{chem2|K2Ca2Mg(SO4)4*2H2O}}, used as fertiliser.

Sulfate-reducing bacteria, some anaerobic microorganisms, such as those living in sediment or near deep sea thermal vents, use the reduction of sulfates coupled with the oxidation of organic compounds or hydrogen as an energy source for chemosynthesis.

Some sulfates were known to alchemists. The vitriol salts, from the Latin vitreolum, glassy, were so-called because they were some of the first transparent crystals known.{{cite book|title=Inorganic and Theoretical Chemistry|first=F. Sherwood|last=Taylor|edition=6th|date=1942|publisher=William Heinemann}} Green vitriol is iron(II) sulfate heptahydrate, {{chem2|FeSO4*7H2O}}; blue vitriol is copper(II) sulfate pentahydrate, {{chem2|CuSO4*5H2O}} and white vitriol is zinc sulfate heptahydrate, {{chem2|ZnSO4*7H2O}}. Alum, a double sulfate of potassium and aluminium with the formula {{chem2|K2Al2(SO4)4*24H2O}}, figured in the development of the chemical industry.

Sulfates occur as microscopic particles (aerosols) resulting from fossil fuel and biomass combustion. They increase the acidity of the atmosphere and form acid rain. The anaerobic sulfate-reducing bacteria Desulfovibrio desulfuricans and D. vulgaris can remove the black sulfate crust that often tarnishes buildings.{{cite journal|date= Nov 2006| pages=1075–1079| title=Saving a fragile legacy. Biotechnology and microbiology are increasingly used to preserve and restore the worlds cultural heritage| author=Andrea Rinaldi| journal=EMBO Reports| pmc=1679785| pmid=17077862| doi=10.1038/sj.embor.7400844| volume=7| issue=11}}

Image:Climate Change Attribution.png driven by five factors and the historical temperature record. The negative component identified as "sulfate" is associated with the aerosol emissions blamed for global dimming.]]

{{excerpt|Global dimming#History|paragraph=2}}

File:SulufrDioxide2017.png

{{excerpt|Global dimming#Causes|paragraph=1|hat=no|files=no}}

{{excerpt|Global dimming#Reversal|paragraph=1}}

{{excerpt|Global dimming#Historical cooling|hat=no|files=no}}

{{excerpt|Global dimming#Future|paragraphs=1,3|hat=no|files=no}}

{{excerpt|Global dimming#Relationship with water cycle|paragraph=1}}

File:SPICE SRM overview.jpg into the stratosphere.]]

{{excerpt|Stratospheric aerosol injection#Pollution controls and the discovery of radiative effects|paragraph=3|files=no}}

{{chembox

| ImageFile1 = Hydrogen sulfate.svg

| ImageSize1 = 120px

| ImageAlt1 = Hydrogen sulfate (bisulfate)

| IUPACName = Hydrogensulfate{{Citation|url = http://old.iupac.org/publications/books/rbook/Red_Book_2005.pdf|title = Nomenclature of Inorganic Chemistry IUPAC Recommendations 2005|publisher = IUPAC|page = 129|url-status = live|archive-url = https://web.archive.org/web/20170518230415/http://old.iupac.org/publications/books/rbook/Red_Book_2005.pdf|archive-date = 2017-05-18}}

| OtherNames = Bisulfate

| Name = Hydrogensulfate

|Section1={{Chembox Identifiers

| ChEBI = 45696

| ChemSpiderID = 55666

| CASNo = 14996-02-2

| Gmelin = 2121

| PubChem = 61778

| SMILES = O[S](=O)(=O)[O-]

| StdInChI=1S/H2O4S/c1-5(2,3)4/h(H2,1,2,3,4)/p-1

| StdInChIKey = QAOWNCQODCNURD-UHFFFAOYSA-M

}}

|Section2={{Chembox Properties

| Formula = {{chem2|HSO4−}}

| MolarMass = 97.071 g/mol

| ConjugateAcid = Sulfuric acid

| ConjugateBase = Sulfate

}}

}}

The hydrogensulfate ion ({{chem2|HSO4-}}), also called the bisulfate ion, is the conjugate base of sulfuric acid ({{chem2|H2SO4}}).{{Citation|url = http://old.iupac.org/publications/books/rbook/Red_Book_2005.pdf|title = Nomenclature of Inorganic Chemistry IUPAC Recommendations 2005|publisher = IUPAC|page = 129|url-status = live|archive-url = https://web.archive.org/web/20170518230415/http://old.iupac.org/publications/books/rbook/Red_Book_2005.pdf|archive-date = 2017-05-18}}{{efn|The prefix "bi" in "bisulfate" comes from an outdated naming system and is based on the observation that there is twice as much sulfate ({{chem2|SO4(2-)}}) in sodium bisulfate ({{chem2|NaHSO4}}) and other bisulfates as in sodium sulfate ({{chem2|Na2SO4}}) and other sulfates. See also bicarbonate.}} Sulfuric acid is classified as a strong acid; in aqueous solutions it ionizes completely to form hydronium ({{chem2|H3O+}}) and hydrogensulfate ({{chem2|HSO4-}}) ions. In other words, the sulfuric acid behaves as a Brønsted–Lowry acid and is deprotonated to form hydrogensulfate ion. Hydrogensulfate has a valency of 1. An example of a salt containing the {{chem2|HSO4-}} ion is sodium bisulfate, {{chem2|NaHSO4}}. In dilute solutions the hydrogensulfate ions also dissociate, forming more hydronium ions and sulfate ions ({{chem2|SO4(2-)}}).

{{clear}}

• Sulfonate
• Sulfation and desulfation of lead–acid batteries
• Sulfate-reducing microorganism

{{notelist}}

{{Reflist|30em}}

{{Authority control}}

{{Sulfates}}

• [https://earth.nullschool.net/#current/particulates/surface/level/overlay=suexttau/winkel3 Current global map of aerosol optical thickness]

Category:Particulates

Category:Sulfur oxyanions