plastic#Special purpose plastics

The word plastic derives from the Ancient Greek {{lang|grc|πλαστικός}} ({{lang|grc-Latn|plastikos}}), meaning "capable of being shaped or molded." In turn, this derives from {{lang|grc|πλαστός}} ({{lang|grc-Latn|plastos}}), meaning "molded."{{cite web |title=Plastikos |script-title=grc:πλαστι^κ-ός |url=https://www.perseus.tufts.edu/cgi-bin/ptext?doc=Perseus%3Atext%3A1999.04.0057%3Aentry%3D%2383506 |access-date=July 1, 2011 |website=Henry George Liddell, Robert Scott, A Greek–English Lexicon}} As a noun, the word plastic most commonly refers to the solid products of petrochemical-derived manufacturing.{{cite web |title=Plastic |url=https://www.etymonline.com/search?q=plastic |access-date=July 29, 2021 |website=Online Etymology Dictionary}}

The word plasticity, as a noun, specifically refers to the deformability of the materials used in the manufacture of plastics. Plasticity allows molding, extrusion, or compression into a variety of shapes, including films, fibers, plates, tubes, bottles, and boxes, among many others. In materials science, plasticity also has a more technical definition, describing the nonreversible change in form of solid substances when subjected to external forces. However, this definition extends beyond the scope of this article.

{{See also|Polymer}}Most plastics contain organic polymers.{{Cite book|url=https://books.google.com/books?id=BnccCgAAQBAJ&q=most+plastics+contain+organic+compounds&pg=PA52|title=General Chemistry| vauthors = Ebbing D, Gammon SD |date=2016|publisher=Cengage Learning|isbn=978-1-305-88729-9|language=en}} The vast majority of these polymers are formed from chains of carbon atoms, with or without the attachment of oxygen, nitrogen or sulfur atoms. These chains comprise many repeating units formed from monomers. Each polymer chain consists of several thousand repeating units. The backbone is the part of the chain that is on the main path, linking together a large number of repeat units. To customize the properties of a plastic, different molecular groups called side chains hang from this backbone; they are usually attached to the monomers before the monomers themselves are linked together to form the polymer chain. The structure of these side chains influences the properties of the polymer.

Plastics are usually classified by the chemical structure of the polymer's backbone and side chains. Important groups classified in this way include the acrylics, polyesters, silicones, polyurethanes, and halogenated plastics. Plastics can be classified by the chemical process used in their synthesis, such as condensation, polyaddition, and cross-linking.{{cite web |title=Classification of Plastics |url=http://dwb.unl.edu/Teacher/NSF/C06/C06Links/qlink.queensu.ca/~6jrt/chem210/Page3.html |archive-url=https://web.archive.org/web/20071215124919/http://dwb.unl.edu/Teacher/NSF/C06/C06Links/qlink.queensu.ca/~6jrt/chem210/Page3.html |archive-date=December 15, 2007 |access-date=July 1, 2011 |website=Joanne and Steffanie's Plastics Web Site |language=en}} They can also be classified by their physical properties, including hardness, density, tensile strength, thermal resistance, and glass transition temperature. Plastics can additionally be classified by their resistance and reactions to various substances and processes, such as exposure to organic solvents, oxidation, and ionizing radiation.{{cite web | vauthors = Kent R |title=Periodic Table of Polymers |url=http://www.pcn.org/Technical%20Notes%20-%20Periodic%20Table%20of%20Polymers.htm |archive-url=https://web.archive.org/web/20080703034726/http://www.pcn.org/Technical%20Notes%20-%20Periodic%20Table%20of%20Polymers.htm |archive-date=July 3, 2008 |website=Plastics Consultancy Network |language=en}} Other classifications of plastics are based on qualities relevant to manufacturing or product design for a particular purpose. Examples include thermoplastics, thermosets, conductive polymers, biodegradable plastics, engineering plastics and elastomers.

File:Melted plastic.jpg

One important classification of plastics is the degree to which the chemical processes used to make them are reversible or not.

Thermoplastics do not undergo chemical change in their composition when heated and thus can be molded repeatedly. Examples include polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyvinyl chloride (PVC).{{cite web |title=Composition and Types of Plastic |url=http://www.infoplease.com/ce6/sci/A0860420.html |url-status=dead |website=Infoplease |language=en |access-date=September 29, 2009 |archive-date=October 15, 2012 |archive-url=https://web.archive.org/web/20121015093623/http://www.infoplease.com/ce6/sci/A0860420.html }}

Thermosets, or thermosetting polymers, can melt and take shape only once: after they have solidified, they stay solid and retain their shape permanently.{{Cite book | vauthors = Gilleo K |url=https://books.google.com/books?id=k_2qLoLA_tgC&q=%C2%A0Thermosets,+or+thermosetting+polymers,+can+melt+and+take+shape+only+once |title=Area Array Packaging Processes: For BGA, Flip Chip, and CSP |date=2004 |publisher=McGraw Hill Professional |isbn=978-0-07-142829-3 |language=en |via=Google Books}} If reheated, thermosets decompose rather than melt. Examples of thermosets include epoxy resin, polyimide, and Bakelite. The vulcanization of rubber is an example of this process. Before heating in the presence of sulfur, natural rubber (polyisoprene) is a sticky, slightly runny material, and after vulcanization, the product is dry and rigid.

:

File:Plastics Summary.svg

Approximately 80% of global plastic production includes commodity plastics, a type of plastics primarily chosen for their low cost and ease of manufacturing. These plastics are mass-produced and used in everyday applications such as packaging, food containers, and household products. Most commodity plastics are identifiable by their Resin Identification Codes (RICs), a standardized numbering system developed by ASTM International.

:File:Symbol Resin Code 01 PET.svg Polyethylene terephthalate (PET or PETE)

:File:Symbol Resin Code 02 PE-HD.svg High-density polyethylene (HDPE or PE-HD)

:File:Symbol Resin Code 03 PVC.svg Polyvinyl chloride (PVC or V)

:File:Symbol Resin Code 04 PE-LD.svg Low-density polyethylene (LDPE or PE-LD),

:File:Symbol Resin Code 05 PP.svg Polypropylene (PP)

:File:Symbol Resin Code 06 PS.svg Polystyrene (PS)

Beyond the six most widely recognized listed above, there are more commodity plastics that are also mass-produced and commonly used, such as polyurethanes (PURs). PURs are a class of plastics also designated as commodity plastics due to their low cost, ease of manufacturing, and versatility. However, they lack RICs because they encompass many chemically diverse formulations such as foams and adhesives.

Packaging represents the largest application of commodity plastics, consuming 146 million metric tons (36% of global production) in 2015 alone. Beyond packaging, however, these plastics are critical in various other fields such as agriculture, construction, consumer goods, and healthcare.

Although many traits such as durability and resistance to biodegradability are desirable in various applications, they have led to significant environmental issues. An estimated 8 to 12 million tons of plastic enter oceans annually, primarily from mismanaged packaging waste. Commodity plastics account for the majority of this pollution, as their recycling rates remain low (e.g., only ~9% of all plastics are recycled globally). Microplastics derived from their degradation further threaten ecosystems and human health.

A huge number of plastics exist beyond the commodity plastics, with many having exceptional properties.

{{Clear}}

{{div flex row|align-items=center}}

{{Graph:Chart

| width=110

| height=110

| type=pie

| legend=Polymer

| x=LDPE,HDPE,PP,PS,PVC,PET,PUR,PP&A Fibers,All Others,Additives

| y1=0.157,0.128,0.167,0.061,0.093,0.081,0.066,0.145,0.039,0.061

| showValues=format:.1%,offset:5

}}

{{div flex row end}}

Engineering plastics are more robust and are used to manufacture products such as vehicle parts, building and construction materials, and some machine parts. In some cases, they are polymer blends formed by mixing different plastics together (ABS, HIPS etc.). Engineering plastics can replace metals in vehicles, lowering their weight and improving fuel efficiency by 6–8%. Roughly 50% of the volume of modern cars is made of plastic, but this only accounts for 12–17% of the vehicle weight.{{cite web |title=Plastic Recycling Factsheet |url=https://circulareconomy.europa.eu/platform/sites/default/files/euric_-_plastic_recycling_fact_sheet.pdf |publisher=EuRIC - European Recycling Industries’ Confederation |access-date=November 9, 2021}}

• Acrylonitrile butadiene styrene (ABS): electronic equipment cases (e.g., computer monitors, printers, keyboards) and drainage pipes
• High-impact polystyrene (HIPS): refrigerator liners, food packaging, and vending cups
• Polycarbonate (PC): compact discs, eyeglasses, riot shields, security windows, traffic lights, and lenses
• Polycarbonate + acrylonitrile butadiene styrene (PC + ABS): a blend of PC and ABS that creates a stronger plastic used in car interior and exterior parts, and in mobile phone bodies
• Polyethylene + acrylonitrile butadiene styrene (PE + ABS): a slippery blend of PE and ABS used in low-duty dry bearings
• Polymethyl methacrylate (PMMA) (acrylic): contact lenses (of the original "hard" variety), glazing (best known in this form by its various trade names around the world; e.g. Perspex, Plexiglas, and Oroglas), fluorescent-light diffusers, and rear light covers for vehicles. It also forms the basis of artistic and commercial acrylic paints, when suspended in water with the use of other agents.
• Silicones (polysiloxanes): heat-resistant resins used mainly as sealants but also used for high-temperature cooking utensils and as a base resin for industrial paints
• Urea-formaldehyde (UF): one of the aminoplasts used as a multi-colorable alternative to phenolics: used as a wood adhesive (for plywood, chipboard, hardboard) and electrical switch housings

High-performance plastics are a category of polymers exhibiting superior properties compared to commodity and engineering plastics. These plastics can withstand high temperatures, often above 302°F (150°C), are highly resistant to chemical corrosion and degradation, have excellent mechanical and electric properties, and are lightweight and extremely versatile.

• Aramids: best known for their use in the manufacture of body armor, this class of heat-resistant and strong synthetic fibers also has applications in aerospace and military and includes Kevlar, Nomex, and Twaron.
• Ultra-high-molecular-weight polyethylenes (UHMWPE)
• Polyetheretherketone (PEEK): strong, chemical- and heat-resistant thermoplastic; its biocompatibility allows for use in medical implant applications and aerospace moldings. It is one of the most expensive commercial polymers.
• Polyetherimide (PEI): a high-temperature, chemically stable polymer that does not crystallize
• Polyimide: a high-temperature plastic used in materials such as Kapton tape
• Polysulfone (PS): high-temperature melt-processable resin used in membranes, filtration media, water heater dip tubes and other high-temperature applications
• Polytetrafluoroethylene (PTFE): heat-resistant, low-friction coatings used in non-stick surfaces for frying pans, plumber's tape, and water slides
• Polyamide-imide (PAI): high-performance engineering plastic extensively used in high-performance gears, switches, transmissions, and other automotive components and aerospace parts{{cite web |url=https://www.euroshore.com.my/about/industries/aerospace-plastics/ |title=Polymers in aerospace applications |publisher=Euroshore |access-date=June 2, 2021}}
• Polyphenylene sulfide (PPS): extreme chemical resistance, flame retardancy, and thermal stability (up to 428°F).
• Polyethersulfone (PES): best known for their clarity, high-temperature resistance (up to 392°F), and biocompatibility. Commonly used in medical devices, food-grade equipment, and aerospace lighting.
• Polyvinylidene fluoride (PVDF): a nonreactive thermoplastic fluoropolymer known for extreme chemical resistance, ultraviolet stability, and piezoelectric properties. Commonly used in semiconductor tubing, lithium-ion battery binders, and architectural coatings.
• Liquid-crystal polymers (LCPs): a class of polymers combining the properties of both liquids and crystals, known for extreme dimensional stability, low thermal expansion, and high dielectric strength. Commonly used in miniature electronics, fiber-optic cables, and surgical devices.
• Polyimides (PIs): a class of high-performance thermosets, able to operate up to 572°F and best known for their excellent dielectric properties and radiation resistance. Commonly used in flexible printed circuits, space suit layers, and jet engine components.
• Polybenzimidazole (PBI): extremely high heat resistance (up to 752°F short-term), low outgassing, and flame resistance. Commonly used in firefighting gear, semiconductor tools, and aerospace thermal shields.
• Bismaleimide (BMI): known for its high glass transition temperature (around 482°F) and low moisture absorption. Commonly used in composite aircraft matrices and military radar systems.
• Cyanate esters: known for their low dielectric loss and space-grade radiation resistance. Commonly used in satellite components and radar antennas.

Many plastics are completely amorphous, meaning they lack a highly ordered molecular structure.{{Cite book | vauthors = Kutz M |url=https://books.google.com/books?id=gWg-rchM700C&q=many+plastics+completely+amorphous&pg=PA336 |title=Handbook of Materials Selection |publisher=John Wiley & Sons |year=2002 |isbn=978-0-471-35924-1 |language=en |via=Google Books}} Crystalline plastics exhibit a pattern of more regularly spaced atoms, such as high-density polyethylene (HDPE), polybutylene terephthalate (PBT), and polyether ether ketone (PEEK). However, some plastics are partially amorphous and partially crystalline in molecular structure, giving them both a melting point and one or more glass transitions (the temperature above which the extent of localized molecular flexibility is substantially increased). These so-called semi-crystalline plastics include polyethylene, polypropylene, polyvinyl chloride, polyamides (nylons), polyesters and some polyurethanes.

{{Main|Conductive polymer}}

Intrinsically conducting polymers (ICPs) are organic polymers that conduct electricity. While a conductivity of up to 80 kilosiemens per centimeter (kS/cm) in stretch-oriented polyacetylene{{Cite journal | vauthors = Heeger AJ, Kivelson S, Schrieffer JR, Su WP |date=1988 |title=Solitons in Conducting Polymers |journal=Reviews of Modern Physics |volume=60 |issue=3 |pages=781–850 |bibcode=1988RvMP...60..781H |doi=10.1103/RevModPhys.60.781}} has been achieved, it does not approach that of most metals. For example, copper has a conductivity of several hundred kS/cm.{{cite web |title=Properties of Copper |url=https://copperalliance.org.uk/about-copper/copper-alloys/properties-copper/ |website=Copper Development Association |language=en}}

{{Main|Biodegradable plastic}}

Biodegradable plastics are plastics that degrade (break down) upon exposure to biological factors, such as sunlight, ultra-violet radiation, moisture, bacteria, enzymes, or wind abrasion. Attacks by insects, such as waxworms and mealworms, can also be considered forms of biodegradation. Aerobic degradation requires the plastic to be exposed at the surface, whereas anaerobic degradation would be effective in landfill or composting systems. Some companies produce biodegradable additives to further promote biodegradation. Although starch powder can be added as a filler to facilitate degradation of some plastics, such treatment does not lead to complete breakdown. Some researchers have genetically engineered bacteria to synthesize completely biodegradable plastics, such as polyhydroxybutyrate (PHB); however, {{as of|2021|post=,}} these were still relatively expensive.{{Cite journal |vauthors=Brandl H, Püchner P |date=1992 |title=Biodegradation Biodegradation of Plastic Bottles Made from 'Biopol' in an Aquatic Ecosystem Under In Situ Conditions |journal=Biodegradation |volume=2 |issue=4 |pages=237–43 |doi=10.1007/BF00114555 |s2cid=37486324}}

{{Main|Bioplastic}}

While most plastics are produced from petrochemicals, bioplastics are made substantially from renewable plant materials like cellulose and starch.{{cite web|url=http://www.nnfcc.co.uk/tools/biochemical-opportunities-in-the-uk-nnfcc-08-008 |title=Biochemical Opportunities in the UK, NNFCC 08-008 — NNFCC |access-date=March 24, 2011 |url-status=dead |archive-url=https://web.archive.org/web/20110720183608/http://www.nnfcc.co.uk/tools/biochemical-opportunities-in-the-uk-nnfcc-08-008 |archive-date=July 20, 2011 }} Due both to the finite limits of fossil fuel reserves and to rising levels of greenhouse gases caused primarily by the burning of those fuels, the development of bioplastics is a growing field.{{cite web|url=https://packagingeurope.com/bioplastics-growth-report/#:~:text=Packaging%20remains%20the%20largest%20field,total%20bioplastics%20market%20in%202019.&text=According%20to%20the%20report%2C%20global,2.4%20million%20tonnes%20in%202024.|title=Bioplastics industry shows dynamic growth|work=Packaging Europe |date=December 5, 2019}}{{cite web|url=https://www.bioplasticsmagazine.com/en/news/meldungen/20181130-becoming-employed.php|title=Becoming Employed in a Growing Bioplastics Industry - bioplastics MAGAZINE|website=www.bioplasticsmagazine.com}} Global production capacity for bio-based plastics is estimated at 327,000 tonnes per year. In contrast, global production of polyethylene (PE) and polypropylene (PP), the world's leading petrochemical-derived polyolefins, was estimated at over 150 million tonnes in 2015.{{cite news| vauthors = Galie F |title=Global Market Trends and Investments in Polyethylene and Polyproplyene|url=https://www.icis.com/globalassets/documents/forms/ppf-pdf/global_trends_whitepaper_pp_pe.pdf|access-date=December 16, 2017|work=ICIS Whitepaper|publisher=Reed business Information, Inc.|date=November 2016}}

The plastic industry includes the global production, compounding, conversion and sale of plastic products. Although the Middle East and Russia produce most of the required petrochemical raw materials, the production of plastic is concentrated in the global East and West. The plastic industry comprises a huge number of companies and can be divided into several sectors:

Between 1950 and 2017, 9.2 billion tonnes of plastic are estimated to have been made, with more than half of this having been produced since 2004. Since the birth of the plastic industry in the 1950s, global production has increased enormously, reaching 400 million tonnes a year in 2021; this is up from 381 million metric tonnes in 2015 (excluding additives).{{cite journal |last1=Geyer |first1=Roland |last2=Jambeck |first2=Jenna R. |author-link2=Jenna Jambeck |last3=Law |first3=Kara Lavender |title=Production, use, and fate of all plastics ever made |journal=Science Advances |date=July 2017 |volume=3 |issue=7 |pages=e1700782 |doi=10.1126/sciadv.1700782 |pmid=28776036 |pmc=5517107 |bibcode=2017SciA....3E0782G |doi-access=free}} From the 1950s, rapid growth occurred in the use of plastics for packaging, in building and construction, and in other sectors. If global trends on plastic demand continue, it is estimated that by 2050 annual global plastic production will exceed 1.1-billion tonnes annually.

File:Slovnaft - new polypropylene plant PP3.JPG|A Slovnaft facility in Bratislava, Slovakia

File:Ilham Aliyev, Italian President Sergio Mattarella attended inauguration of polypropylene plant constructed in Sumgayit Chemical Industrial Park under SOCAR Polymer project 32.jpg|A SOCAR Polymer polypropylene plant in Sumgayit, Azerbaijan

{{Image frame

|width=600

| align=left

| caption=Annual global plastic production 1950–2015. Vertical lines denote the 1973–1975 recession and the financial crisis of 2007–2008 which caused brief lowering of plastic production.

| content = {{Graph:Chart

| width=500

| height=250

|vAnnotatonsLine=1975,2008

|vAnnotatonsLabel=,

| xGrid=

| yGrid=

| xAxisTitle=

| yAxisTitle=Million metric tonnes

| type=line

| x=1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015

| y=2,2,2,3,3,4,5,5,6,7,8,9,11,13,15,17,20,23,27,32,35,38,44,51,52,46,54,59,64,71,70,72,73,80,86,90,96,104,110,114,120,124,132,137,151,156,168,180,188,202,213,218,231,241,256,263,280,295,281,288,313,325,338,352,367,381

|

}}

}}

{{clear}}

Plastics are produced in chemical plants by the polymerization of their starting materials (monomers); which are almost always petrochemical in nature. Such facilities are normally large and are visually similar to oil refineries, with sprawling pipework running throughout. The large size of these plants allows them to exploit economies of scale. Despite this, plastic production is not particularly monopolized, with about 100 companies accounting for 90% of global production.{{cite web |title=Top 100 Producers: The Minderoo Foundation |url=https://www.minderoo.org/plastic-waste-makers-index/data/indices/producers/ |website=www.minderoo.org |access-date=October 14, 2021}} This includes a mixture of private and state-owned enterprises. Roughly half of all production takes place in East Asia, with China being the largest single producer. Major international producers include:

• Dow Chemical
• LyondellBasell
• ExxonMobil
• SABIC
• BASF
• Sibur
• Shin-Etsu Chemical
• Indorama Ventures
• Sinopec
• Braskem

Historically, Europe and North America have dominated global plastics production. However, since 2010 Asia has emerged as a significant producer, with China accounting for 31% of total plastic resin production in 2020. Regional differences in the volume of plastics production are driven by user demand, the price of fossil fuel feedstocks, and investments made in the petrochemical industry. For example, since 2010 over US$200 billion has been invested in the United States in new plastic and chemical plants, stimulated by the low cost of raw materials. In the European Union (EU), too, heavy investments have been made in the plastics industry, which employs over 1.6-million people with a turnover of more than 360 billion euros per year. In China in 2016 there were over 15,000 plastic manufacturing companies, generating more than US$366 billion in revenue.

In 2017, the global plastics market was dominated by thermoplastics– polymers that can be melted and recast. Thermoplastics include polyethylene (PE), polyethylene terephthalate (PET), polypropylene (PP), polyvinyl chloride (PVC), polystyrene (PS) and synthetic fibers, which together represent 86% of all plastics.

File:Compounding-en.png material]]

Plastic is not sold as a pure unadulterated substance, but is instead mixed with various chemicals and other materials, which are collectively known as additives. These are added during the compounding stage and include substances such as stabilizers, plasticizers and dyes, which are intended to improve the lifespan, workability or appearance of the final item. In some cases, this can involve mixing different types of plastic together to form a polymer blend, such as high impact polystyrene. Large companies may do their own compounding prior to production, but some producers have it done by a third party. Companies that specialize in this work are known as Compounders.

The compounding of thermosetting plastic is relatively straightforward; as it remains liquid until it is cured into its final form. For thermosoftening materials, which are used to make the majority of products, it is necessary to melt the plastic in order to mix-in the additives. This involves heating it to anywhere between {{Convert|150-320|C|F|round=5}}. Molten plastic is viscous and exhibits laminar flow, leading to poor mixing. Compounding is therefore done using extrusion equipment, which is able to supply the necessary heat and mixing to give a properly dispersed product.

The concentrations of most additives are usually quite low, however high levels can be added to create Masterbatch products. The additives in these are concentrated but still properly dispersed in the host resin. Masterbatch granules can be mixed with cheaper bulk polymer and will release their additives during processing to give a homogeneous final product. This can be cheaper than working with a fully compounded material and is particularly common for the introduction of color.

{{multiple image

| align = right

| direction = Horizontal

| total_width = 400

| header =

| image1 = Plastic Injection Molding.webm

| alt1 = See caption

| caption1 = Short video on injection molding (9 min 37 s)

| image2 = Blow molding process.jpg

| alt2 = See caption

| caption2 = Blow molding a plastic drinks bottle

}}

Converters (sometimes known as processors) are companies or specialists that fabricate finished plastic products from raw materials, often in the form of resins, pellets, or films.

• Injection molding: involves injecting molten plastic into a mold cavity under high pressure. The plastic solidifies in the mold to form the desired shape.
• Blow molding: involves heating a plastic tube called a parison and inflating it inside a mold to form hollow products such as bottles and toys.
• Rotational molding: involves rotating a mold on two axes while it is heated. Plastic powder is added to the mold and melts and sticks to the walls as the mold is rotated, which forms thick-walled hollow parts such as intermediate bulk containers.
• Casting: involves pouring liquid resin into a mold where it solidifies into a predesigned shape.
• Film blowing: involves heating a polymer and blowing it into a thin, continuous sheet. Commonly used for making polyethylene and polypropylene films used in packaging.
• Spinning: involves transforming a polymer melt or solution into continuous strands
• 3D printing: involves three-dimensionally printing an object layer by layer following a digital model using computer-aided design software.

For thermosetting materials, the process is slightly different, as the plastics are liquid to begin with and but must be cured to give solid products, but much of the equipment is broadly similar.

The most commonly produced plastic consumer products include packaging made from LDPE (e.g. bags, containers, food packaging film), containers made from HDPE (e.g. milk bottles, shampoo bottles, ice cream tubs), and PET (e.g. bottles for water and other drinks). Together these products account for around 36% of plastics use in the world. Most of them (e.g. disposable cups, plates, cutlery, takeaway containers, carrier bags) are used for only a short period, many for less than a day. The use of plastics in building and construction, textiles, transportation and electrical equipment also accounts for a substantial share of the plastics market. Plastic items used for such purposes generally have longer life spans. They may be in use for periods ranging from around five years (e.g. textiles and electrical equipment) to more than 20 years (e.g. construction materials, industrial machinery).

Plastic consumption differs among countries and communities, with some form of plastic having made its way into most people's lives. North America (i.e. the North American Free Trade Agreement or NAFTA region) accounts for 21% of global plastic consumption, closely followed by China (20%) and Western Europe (18%). In North America and Europe, there is high per capita plastic consumption (94 kg and 85 kg/capita/year, respectively). In China, there is lower per capita consumption (58 kg/capita/year), but high consumption nationally because of its large population.{{clear}}

PET Bottle Water.jpg|Water bottles made of PET

File:HDPE bottles and containers.png|High density polythene (HDPE) is used for making sturdy containers; transparent containers may be made of PET.

Pulling on the hood of the Tyveck suit (5429334133).jpg|Disposable suits can be made from non-woven HDPE fabric.

Registered Mail Royal Mail - Great Britain-Germany 2017 - envelope front side.jpg|Plastic mailing envelopes made of HDPE

1682478-poster-1280-plasticbags.jpg|Clear plastic bags (shown) are made of low density polythene (LDPE); blown-film shopping bags with handles are now made of HDPE.

A Ziploc bag made from LDPE.jpg|A Ziploc bag made of LDPE

Daujėnų naminė duona.JPG|Food wrap made of LDPE

Image-from-rawpixel-id-5957725-original.jpg|Metalized polypropylene film is a commonly used snack pack material.{{Cite web |date=October 28, 2021 |title=Sustainable packaging materials for snacks |url=https://www.bakeryandsnacks.com/Article/2013/06/06/Sustainable-packaging-materials-for-snacks |access-date=September 10, 2022 |website= |archive-url=https://web.archive.org/web/20211028142046/https://www.bakeryandsnacks.com/Article/2013/06/06/Sustainable-packaging-materials-for-snacks |archive-date=October 28, 2021 |url-status=dead}}

Kinder Joy 01.jpg|Kinder Joy shell made of polypropylene

Red Polypropylene Chair with Stainless Steel Structure.JPG|A polypropylene chair

Hanoi Vietnam The-omnipresent-plastic-chairs-01.jpg|Stools made of HDPE

Polistirolo.JPG|Expanded polystyrene foam ("Thermocol")

Styrofoam-grey-board.jpg|Extruded polystyrene foam ("Styrofoam")

Have a Nice Day! styrofoam food container.JPG|Thermocol take-away food container

Plastic egg carton.jpg|Egg tray made of PETE

LDPE Foam.jpg|A piece of packaging foam made of LDPE

Urethane sponge1.jpg|A kitchen sponge made of polyurethane foam

Frying pan.jpeg|Non-stick cookware with Teflon coating

IPhone 5c blue back.jpg|iPhone 5c, a smartphone with a polycarbonate "unibody" shell

KelpAquarium.jpg|To withstand the extreme water pressure, this {{nowrap|10-meter}} deep Monterey Bay Aquarium tank has windows made of acrylic glass up to 33 cm thick.

Plastic tubing.jpg|alt=|PVC pipes

Pills in blister pack.jpg|PVC blister pack

The largest application for plastics is as packaging materials, but they are used in a wide range of other sectors, including: construction (pipes, gutters, door and windows), textiles (stretchable fabrics, fleece), consumer goods (toys, tableware, toothbrushes), transportation (headlights, bumpers, body panels, wing mirrors), electronics (phones, computers, televisions) and as machine parts. In optics, plastics are used to manufacture aspheric lenses.{{Cite web |last=Paschotta |first=Dr Rüdiger |title=plastic optics |url=https://www.rp-photonics.com/plastic_optics.html |access-date=2024-10-07 |website=www.rp-photonics.com |language=en}}

{{align|left|

{{Graph:Chart

| width=600

| height=300

| yAxisTitle=Million metric tonnes

| type=rect

| x=Packaging,Construction,Other sectors,Textiles,Consumer products,Transportation,Electronics,Industrial Machinery

| xAxisAngle=+30

| xAxisTitle=Primary plastic production by industrial sector 2015

| y1=146

| y2=,65

| y3=,,59

| y4=,,,47

| y5=,,,,42

| y6=,,,,,27

| y7=,,,,,,18

| y8=,,,,,,,3

|showValues = offset:4

}}

}}

{{Break|2}}

{{Graph:Chart

| width=110

| height=110

| type=pie

| x=Packaging,Construction,Other sectors,Textiles,Consumer products,Transportation,Electronics,Industrial Machinery

| y1=0.358722359,0.15970516,0.144963145,0.115479115,0.103194103,0.066339066,0.044226044,0.007371007

| showValues=format:.0%,offset:6

}}

{{clear}}

Additives are chemicals blended into plastics to improved their performance or appearance.{{cite journal | vauthors = Hahladakis JN, Velis CA, Weber R, Iacovidou E, Purnell P | title = An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling | journal = Journal of Hazardous Materials | volume = 344 | pages = 179–199 | date = February 2018 | pmid = 29035713 | doi = 10.1016/j.jhazmat.2017.10.014 | doi-access = free | bibcode = 2018JHzM..344..179H }}{{cite journal |last1=Marturano |first1=Valentina |last2=Cerruti |first2=Pierfrancesco |last3=Ambrogi |first3=Veronica |title=Polymer additives |journal=Physical Sciences Reviews |date=June 27, 2017 |volume=2 |issue=6 |page=130 |doi=10.1515/psr-2016-0130|bibcode=2017PhSRv...2..130M |s2cid=199059895 |doi-access=free }} Additives are therefore one of the reasons why plastic is used so widely.{{cite journal |last1=Pfaendner |first1=Rudolf |title=How will additives shape the future of plastics? |journal=Polymer Degradation and Stability |date=September 2006 |volume=91 |issue=9 |pages=2249–2256 |doi=10.1016/j.polymdegradstab.2005.10.017}} Plastics are composed of chains of polymers. Many different chemicals are used as plastic additives. A randomly chosen plastic product generally contains around 20 additives. The identities and concentrations of additives are generally not listed on products.

In the EU, over 400 additives are used in high volumes.{{cite web |title=Mapping exercise – Plastic additives initiative - ECHA |url=https://echa.europa.eu/mapping-exercise-plastic-additives-initiative |website=echa.europa.eu |access-date=May 3, 2022}} In a global market analysis, 5,500 additives were found.{{Cite journal |last1=Wiesinger |first1=Helene |last2=Wang |first2=Zhanyun |last3=Hellweg |first3=Stefanie |date=July 6, 2021 |title=Deep Dive into Plastic Monomers, Additives, and Processing Aids |journal=Environmental Science & Technology |volume=55 |issue=13 |pages=9339–9351 |doi=10.1021/acs.est.1c00976|pmid=34154322 |bibcode=2021EnST...55.9339W |hdl=20.500.11850/495854 |s2cid=235597312 |hdl-access=free }} At a minimum, all plastic contains some polymer stabilizers which permit them to be melt-processed (molded) without suffering polymer degradation.Additives in polyvinyl chloride (PVC), used widely for sanitary plumbing, can constitute up to 80% of the total volume. Unadulterated plastic (barefoot resin) is rarely sold.{{cn|date=January 2025}}

Additives may be weakly bound to the polymers or react in the polymer matrix. Although additives are blended into plastic they remain chemically distinct from it and can gradually leach back out during normal use, when in landfills, or following improper disposal in the environment.{{cite web |title=Emission Scenario Documents: N°3 Plastic Additives (2004, revised in 2009) |url=https://www.oecd.org/officialdocuments/publicdisplaydocumentpdf/?cote=env/jm/mono(2004)8/rev1&doclanguage=en |publisher=Organisation for Economic Co-operation and Development |access-date=May 19, 2022}} Additives may also degrade to form other compounds that could be more benign or more toxic. Plastic fragmentation into microplastics and nanoplastics can allow chemical additives to move in the environment far from the point of use. Once released, some additives and derivatives may persist in the environment and bioaccumulate in organisms. They can have adverse effects on human health and biota. A recent review by the United States Environmental Protection Agency (US EPA) revealed that out of 3,377 chemicals potentially associated with plastic packaging and 906 likely associated with it, 68 were ranked by ECHA as "highest for human health hazards" and 68 as "highest for environmental hazards".

{{Main|Plastic recycling}}

As additives change the properties of plastics they have to be considered during recycling. Presently, almost all recycling is performed by simply remelting and fabricating used plastic into new items. Additives present risks in recycled products due to their difficulty to remove. When plastic products are recycled, it is highly likely that the additives will be integrated into the new products. Plastic waste, even if it is all of the same polymer type, will contain varying types and amounts of additives. Mixing these together can give a material with inconsistent properties, which can be unappealing to industry. For example, mixing different colored plastics with different plastic colorants together can produce a discolored or brown material and for this reason plastic is usually sorted both by polymer type and color prior to recycling.

Lack of transparency and reporting across the value chain often results in lack of knowledge concerning the chemical profile of the final products. For example, products containing brominated flame retardants have been incorporated into new plastic products. Flame retardants are a group of chemicals used in electronic and electrical equipment, textiles, furniture and construction materials which should not be present in food packaging or child care products. A recent study found brominated dioxins as unintentional contaminants in toys made from recycled plastic electronic waste that contained brominated flame retardants. Brominated dioxins have been found to exhibit toxicity similar to that of chlorinated dioxins. They can have negative developmental effects and negative effects on the nervous system and interfere with mechanisms of the endocrine system.

Plastics have proliferated in part because they are relatively benign. They are not acutely toxic, in large part because they are insoluble and or indigestible owing to their large molecular weight. Their degradation products also are rarely toxic. The same cannot be said about some additives, which tend to be lower molecular weight.

Controversies associated with plastics often relate to their additives, some of which are potentially harmful.{{cite journal |last1=Elias |first1=Hans-Georg |last2=Mülhaupt |first2=Rolf |title=Plastics, General Survey, 1. Definition, Molecular Structure and Properties |journal=Ullmann's Encyclopedia of Industrial Chemistry |date=April 14, 2015 |pages=1–70 |doi=10.1002/14356007.a20_543.pub2|isbn=9783527306732 }}{{cite journal | vauthors = Teuten EL, Saquing JM, Knappe DR, Barlaz MA, Jonsson S, Björn A, Rowland SJ, Thompson RC, Galloway TS, Yamashita R, Ochi D, Watanuki Y, Moore C, Viet PH, Tana TS, Prudente M, Boonyatumanond R, Zakaria MP, Akkhavong K, Ogata Y, Hirai H, Iwasa S, Mizukawa K, Hagino Y, Imamura A, Saha M, Takada H | display-authors = 6 | title = Transport and release of chemicals from plastics to the environment and to wildlife | journal = Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences | volume = 364 | issue = 1526 | pages = 2027–45 | date = July 2009 | pmid = 19528054 | pmc = 2873017 | doi = 10.1098/rstb.2008.0284 }} For example, some flame retardants, such as octabromodiphenyl ether and pentabromodiphenyl ether, are unsuitable for food packaging. Other harmful additives include cadmium, chromium, lead and mercury (regulated under the Minamata Convention on Mercury), which have previously been used in plastic production, are banned in many jurisdictions. However, they are still routinely found in some plastic packaging, including for food.{{cn|date=January 2025}}

Additives can also be problematic if waste is burned, especially when burning is uncontrolled or takes place in low-technology incinerators, as is common in many developing countries. Incomplete combustion can cause emissions of hazardous substances such as acid gases and ash, which can contain persistent organic pollutants (POPs) such as dioxins.

A number of additives identified as hazardous to humans and/or the environment are regulated internationally. The Stockholm Convention on Persistent Organic Pollutants is a global treaty to protect human health and the environment from chemicals that remain intact in the environment for long periods, become widely distributed geographically, accumulate in the fatty tissue of humans and wildlife, and have harmful impacts on human health or on the environment. The use of bisphenol A (BPA) in plastic baby bottles is banned in many parts of the world but is not restricted in some low-income countries.

In 2023, plasticosis, a new disease caused by the ingestion of plastic waste, was discovered in seabirds. Birds affected with this disease were found to have scarred and inflamed digestive tracts, which can impair their ability to digest food.{{Cite web |url=https://www.theguardian.com/environment/2023/mar/03/plasticosis-new-disease-caused-by-plastics-discovered-in-seabirds|title=New disease caused by plastics discovered in seabirds |date=March 3, 2023 |work=The Guardian |access-date=March 4, 2023}} "When birds ingest small pieces of plastic, they found, it inflames the digestive tract. Over time, the persistent inflammation causes tissues to become scarred and disfigured, affecting digestion, growth and survival."{{Cite web |url=https://www.nhm.ac.uk/press-office/press-releases/new-disease-caused-solely-by-plastics-discovered-in-seabirds-.html|title=New disease caused solely by plastics discovered in seabirds |date=March 3, 2023 |publisher=Natural History Museum |access-date=March 4, 2023}}

Plastics per se have low toxicity due to their insolubility in water and because they have a large molecular weight. They are biochemically inert. Additives in plastic products can be more problemative.{{cite journal | vauthors = Hahladakis JN, Velis CA, Weber R, Iacovidou E, Purnell P | title = An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling | journal = Journal of Hazardous Materials | volume = 344 | pages = 179–199 | date = February 2018 | pmid = 29035713 | doi = 10.1016/j.jhazmat.2017.10.014 | doi-access = free | bibcode = 2018JHzM..344..179H }}{{open access}} For example, plasticizers like adipates and phthalates are often added to brittle plastics like PVC to make them pliable. Traces of these compounds can leach out of the product. Owing to concerns over the effects of such leachates, the EU has restricted the use of DEHP (di-2-ethylhexyl phthalate) and other phthalates in some applications, and the US has limited the use of DEHP, DPB, BBP, DINP, DIDP, and DnOP in children's toys and child-care articles through the Consumer Product Safety Improvement Act. Some compounds leaching from polystyrene food containers have been proposed to interfere with hormone functions and are suspected human carcinogens (cancer-causing substances). Other chemicals of potential concern include alkylphenols.

While a finished plastic may be non-toxic, the monomers used in the manufacture of its parent polymers may be toxic. In some cases, small amounts of those chemicals can remain trapped in the product unless suitable processing is employed. For example, the World Health Organization's International Agency for Research on Cancer (IARC) has recognized vinyl chloride, the precursor to PVC, as a human carcinogen.{{cite web| vauthors = McRandle PW |title = Plastic Water Bottles|publisher = National Geographic|date = March–April 2004|url = http://www.thegreenguide.com/doc/101/plastic|access-date = November 13, 2007}}

{{See also|Health effects of Bisphenol A}}

Some plastic products degrade to chemicals with estrogenic activity.{{cite journal | vauthors = Yang CZ, Yaniger SI, Jordan VC, Klein DJ, Bittner GD | title = Most plastic products release estrogenic chemicals: a potential health problem that can be solved | journal = Environmental Health Perspectives | volume = 119 | issue = 7 | pages = 989–96 | date = July 2011 | pmid = 21367689 | pmc = 3222987 | doi = 10.1289/ehp.1003220 | bibcode = 2011EnvHP.119..989Y }} The primary building block of polycarbonates, bisphenol A (BPA), is an estrogen-like endocrine disruptor that may leach into food. Research in Environmental Health Perspectives finds that BPA leached from the lining of tin cans, dental sealants and polycarbonate bottles can increase the body weight of lab animals' offspring.{{cite journal | vauthors = Rubin BS, Murray MK, Damassa DA, King JC, Soto AM | title = Perinatal exposure to low doses of bisphenol A affects body weight, patterns of estrous cyclicity, and plasma LH levels | journal = Environmental Health Perspectives | volume = 109 | issue = 7 | pages = 675–80 | date = July 2001 | pmid = 11485865 | pmc = 1240370 | doi = 10.2307/3454783 | jstor = 3454783 }} A more recent animal study suggests that even low-level exposure to BPA results in insulin resistance, which can lead to inflammation and heart disease.{{cite journal | vauthors = Alonso-Magdalena P, Morimoto S, Ripoll C, Fuentes E, Nadal A | title = The estrogenic effect of bisphenol A disrupts pancreatic beta-cell function in vivo and induces insulin resistance | journal = Environmental Health Perspectives | volume = 114 | issue = 1 | pages = 106–12 | date = January 2006 | pmid = 16393666 | pmc = 1332664 | doi = 10.1289/ehp.8451 | bibcode = 2006EnvHP.114..106A | url = http://www.ehponline.org/docs/2005/8451/abstract.html | url-status = dead | archive-url = https://web.archive.org/web/20090119022220/http://www.ehponline.org/docs/2005/8451/abstract.html | archive-date = January 19, 2009 }} As of January 2010, the Los Angeles Times reported that the US Food and Drug Administration (FDA) is spending $30 million to investigate indications of BPA's link to cancer.{{Cite news | vauthors = Zajac A |date=January 16, 2010 |title=FDA Issues BPA Guidelines |language=en |work=Los Angeles Times |url=https://www.latimes.com/archives/la-xpm-2010-jan-16-la-na-fda-bpa16-2010jan16-story.html |access-date=July 29, 2021}} Bis(2-ethylhexyl) adipate, present in plastic wrap based on PVC, is also of concern, as are the volatile organic compounds present in new car smell. The EU has a permanent ban on the use of phthalates in toys. In 2009, the US government banned certain types of phthalates commonly used in plastic.{{cite web | vauthors = McCormick LW | url = http://www.consumeraffairs.com/news04/2009/10/pirg_lead_tests.html | title = More Kids' Products Found Containing Unsafe Chemicals | work = ConsumerAffairs.com | date = October 30, 2009 }}

{{See also|Plastic pollution|Marine debris|Great Pacific Garbage Patch}}

Because the chemical structure of most plastics renders them durable, they are resistant to many natural degradation processes. Much of this material may persist for centuries or longer, given the demonstrated persistence of structurally similar natural materials such as amber.{{huh?|date=January 2025}}

Estimates differ as to the amount of plastic waste produced in the last century. By one estimate, one billion tons of plastic waste have been discarded since the 1950s.{{cite book| vauthors = Weisman A |title=The world without us|date=2007|publisher=Thomas Dunne Books/St. Martin's Press|location=New York|isbn=978-1-4434-0008-4}} Others estimate a cumulative human production of 8.3-billion tons of plastic, of which 6.3-billion tons is waste, with only 9% getting recycled.{{cite journal | vauthors = Geyer R, Jambeck JR, Law KL | title = Production, use, and fate of all plastics ever made | journal = Science Advances | volume = 3 | issue = 7 | pages = e1700782 | date = July 2017 | pmid = 28776036 | pmc = 5517107 | doi = 10.1126/sciadv.1700782 | bibcode = 2017SciA....3E0782G }}

It is estimated that this waste is made up of 81% polymer resin, 13% polymer fibers and 32% additives. In 2018 more than 343 million tons of plastic waste were generated, 90% of which was composed of post-consumer plastic waste (industrial, agricultural, commercial and municipal plastic waste). The rest was pre-consumer waste from resin production and manufacturing of plastic products (e.g. materials rejected due to unsuitable color, hardness, or processing characteristics).

The Ocean Conservancy reported that China, Indonesia, Philippines, Thailand, and Vietnam dump more plastic into the sea than all other countries combined.{{cite news | vauthors = Leung H |title=Five Asian Countries Dump More Plastic Into Oceans Than Anyone Else Combined: How You Can Help |url=https://www.forbes.com/sites/hannahleung/2018/04/21/five-asian-countries-dump-more-plastic-than-anyone-else-combined-how-you-can-help/#1d663de71234 |access-date=June 23, 2019 |work=Forbes |date=April 21, 2018 |language=en |quote=China, Indonesia, the Philippines, Thailand, and Vietnam are dumping more plastic into oceans than the rest of the world combined, according to a 2017 report by Ocean Conservancy}} The rivers Yangtze, Indus, Yellow, Hai, Nile, Ganges, Pearl, Amur, Niger, and Mekong "transport 88% to 95% of the global [plastics] load into the sea."{{cite journal | vauthors = Schmidt C, Krauth T, Wagner S | title = Export of Plastic Debris by Rivers into the Sea | journal = Environmental Science & Technology | volume = 51 | issue = 21 | pages = 12246–12253 | date = November 2017 | pmid = 29019247 | doi = 10.1021/acs.est.7b02368 | bibcode = 2017EnST...5112246S | url = http://oceanrep.geomar.de/43169/4/es7b02368_si_001.pdf | quote = The 10 top-ranked rivers transport 88–95% of the global load into the sea }}{{cite news | vauthors = Franzen H |title=Almost all plastic in the ocean comes from just 10 rivers |url=https://p.dw.com/p/2oTF6 |access-date=December 18, 2018 |work=Deutsche Welle |date=November 30, 2017 |quote=It turns out that about 90 percent of all the plastic that reaches the world's oceans gets flushed through just 10 rivers: The Yangtze, the Indus, Yellow River, Hai River, the Nile, the Ganges, Pearl River, Amur River, the Niger, and the Mekong (in that order).}}{{Verify quote|date=February 2021|type=quote punctuation|text=Should the full stop in this quote be placed outside of it instead? See Wikipedia:Manual_of_Style#Punctuation for more information.}}

The presence of plastics, particularly microplastics, within the food chain is increasing. In the 1960s microplastics were observed in the guts of seabirds, and since then have been found in increasing concentrations. The long-term effects of plastics in the food chain are poorly understood. In 2009 it was estimated that 10% of modern waste was plastic, although estimates vary according to region.{{cite journal | vauthors = Barnes DK, Galgani F, Thompson RC, Barlaz M | title = Accumulation and fragmentation of plastic debris in global environments | journal = Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences | volume = 364 | issue = 1526 | pages = 1985–98 | date = July 2009 | pmid = 19528051 | pmc = 2873009 | doi = 10.1098/rstb.2008.0205 }} Meanwhile, 50% to 80% of debris in marine areas is plastic. Plastic is often used in agriculture. There is more plastic in the soil than in the oceans. The presence of plastic in the environment hurts ecosystems and human health.{{cite news |last1=Carrington |first1=Damian |title='Disastrous' plastic use in farming threatens food safety – UN |url=https://www.theguardian.com/environment/2021/dec/07/disastrous-plastic-use-in-farming-threatens-food-safety-un |access-date=December 8, 2021 |agency=The Guardian |date=December 7, 2021}}

Research on the environmental impacts has typically focused on the disposal phase. However, the production of plastics is also responsible for substantial environmental, health and socioeconomic impacts.{{Cite journal|last1=Cabernard|first1=Livia|last2=Pfister|first2=Stephan|last3=Oberschelp|first3=Christopher|last4=Hellweg|first4=Stefanie|date=December 2, 2021|title=Growing environmental footprint of plastics driven by coal combustion|journal=Nature Sustainability|volume=5 |issue=2 |language=en|pages=139–148|doi=10.1038/s41893-021-00807-2|bibcode=2021NatSu...5..139C |s2cid=244803448|issn=2398-9629|doi-access=free|hdl=20.500.11850/518642|hdl-access=free}}

Prior to the Montreal Protocol, CFCs had been commonly used in the manufacture of the plastic polystyrene, the production of which had contributed to depletion of the ozone layer.

Efforts to minimize environmental impact of plastics may include lowering of plastics production and use, waste- and recycling-policies, and the proactive development and deployment of alternatives to plastics such as for sustainable packaging.

{{Excerpt|Microplastics}}

{{main|Polymer degradation}}

Plastics degrade by a variety of processes, the most significant of which is usually photo-oxidation. Their chemical structure determines their fate. Polymers' marine degradation takes much longer as a result of the saline environment and cooling effect of the sea, contributing to the persistence of plastic debris in certain environments. Recent studies have shown, however, that plastics in the ocean decompose faster than had been previously thought, due to exposure to the sun, rain, and other environmental conditions, resulting in the release of toxic chemicals such as bisphenol A. However, due to the increased volume of plastics in the ocean, decomposition has slowed down.{{cite web |last1= American Chemical Society |title=Plastics In Oceans Decompose, Release Hazardous Chemicals, Surprising New Study Says|url=https://www.sciencedaily.com/releases/2009/08/090819234651.htm|website=Science Daily|access-date=March 15, 2015}} The Marine Conservancy has predicted the decomposition rates of several plastic products: It is estimated that a foam plastic cup will take 50 years, a plastic beverage holder will take 400 years, a disposable diaper will take 450 years, and fishing line will take 600 years to degrade.{{cite web|url=http://plastic-pollution.org/|title=When The Mermaids Cry: The Great Plastic Tide| vauthors = Le Guern C |date=March 2018|website=Coastal Care|archive-url=https://web.archive.org/web/20180405071834/http://plastic-pollution.org/|archive-date=April 5, 2018|url-status=live|access-date=November 10, 2018}}

Microbial species capable of degrading plastics are known to science, some of which are potentially useful for disposal of certain classes of plastic waste.

• In 1975, a team of Japanese scientists studying ponds containing waste water from a nylon factory discovered a strain of Flavobacterium that digests certain byproducts of nylon 6 manufacture, such as the linear dimer of 6-aminohexanoate.{{Cite journal | vauthors = Kinoshita S, Kageyama S, Iba K, Yamada Y, Okada H |date=1975 |title=Utilization of a Cyclic Dimer and Linear Oligomers of E-Aminocaproic Acid by Achromobacter Guttatus |journal=Agricultural and Biological Chemistry |volume=39 |issue=6 |pages=1219–1223 |doi=10.1271/bbb1961.39.1219 |doi-access=free}} Nylon 4 (polybutyrolactam) can be degraded by the ND-10 and ND-11 strands of Pseudomonas sp. found in sludge, resulting in GABA (γ-aminobutyric acid) as a byproduct.
• Several species of soil fungi can consume polyurethane,{{cite journal | vauthors = Russell JR, Huang J, Anand P, Kucera K, Sandoval AG, Dantzler KW, Hickman D, Jee J, Kimovec FM, Koppstein D, Marks DH, Mittermiller PA, Núñez SJ, Santiago M, Townes MA, Vishnevetsky M, Williams NE, Vargas MP, Boulanger LA, Bascom-Slack C, Strobel SA | display-authors = 6 | title = Biodegradation of polyester polyurethane by endophytic fungi | journal = Applied and Environmental Microbiology | volume = 77 | issue = 17 | pages = 6076–84 | date = September 2011 | pmid = 21764951 | pmc = 3165411 | doi = 10.1128/aem.00521-11 | bibcode = 2011ApEnM..77.6076R }} including two species of the Ecuadorian fungus Pestalotiopsis. They can consume polyurethane both aerobically and anaerobically (such as at the bottom of landfills).{{cite journal | vauthors = Russell JR, Huang J, Anand P, Kucera K, Sandoval AG, Dantzler KW, Hickman D, Jee J, Kimovec FM, Koppstein D, Marks DH, Mittermiller PA, Núñez SJ, Santiago M, Townes MA, Vishnevetsky M, Williams NE, Vargas MP, Boulanger LA, Bascom-Slack C, Strobel SA | display-authors = 6 | title = Biodegradation of polyester polyurethane by endophytic fungi | journal = Applied and Environmental Microbiology | volume = 77 | issue = 17 | pages = 6076–84 | date = September 2011 | pmid = 21764951 | pmc = 3165411 | doi = 10.1128/AEM.00521-11 | bibcode = 2011ApEnM..77.6076R }}
• Methanogenic microbial consortia degrade styrene, using it as a carbon source.{{cite web|url=http://www.ceaa-acee.gc.ca/050/documents/56647/56647E.pdf |title=Deep Geologic Repository Project |website=Ceaa-acee.gc.ca |access-date=April 18, 2017}} Pseudomonas putida can convert styrene oil into various biodegradable plastic|biodegradable polyhydroxyalkanoates.{{cite web| vauthors = Roy R |url=http://www.livescience.com/technology/060307_styrofoam_cup.html |title=Immortal Polystyrene Foam Meets its Enemy |website=Livescience.com |date=March 7, 2006 |access-date=April 18, 2017}}{{cite journal | vauthors = Ward PG, Goff M, Donner M, Kaminsky W, O'Connor KE | title = A two step chemo-biotechnological conversion of polystyrene to a biodegradable thermoplastic | journal = Environmental Science & Technology | volume = 40 | issue = 7 | pages = 2433–7 | date = April 2006 | pmid = 16649270 | doi = 10.1021/es0517668 | bibcode = 2006EnST...40.2433W }}
• Microbial communities isolated from soil samples mixed with starch have been shown to be capable of degrading polypropylene.{{cite journal | vauthors = Cacciari I, Quatrini P, Zirletta G, Mincione E, Vinciguerra V, Lupattelli P, Giovannozzi Sermanni G | title = Isotactic polypropylene biodegradation by a microbial community: physicochemical characterization of metabolites produced | journal = Applied and Environmental Microbiology | volume = 59 | issue = 11 | pages = 3695–700 | date = November 1993 | pmid = 8285678 | pmc = 182519 | doi = 10.1128/AEM.59.11.3695-3700.1993 | bibcode = 1993ApEnM..59.3695C | doi-access = free }}
• The fungus Aspergillus fumigatus effectively degrades plasticized PVC.{{cite thesis |type=Ph.D. |url=http://prr.hec.gov.pk/Thesis/3362H.pdf |vauthors=Ishtiaq AM |title=Microbial Degradation of Polyvinyl Chloride Plastics |publisher=Quaid-i-Azam University |location=Islamabad |year=2011 |pages= |access-date=December 23, 2013 |archive-date=December 24, 2013 |archive-url=https://web.archive.org/web/20131224083944/http://prr.hec.gov.pk/Thesis/3362H.pdf |url-status=dead }}{{rp|45–46}} Phanerochaete chrysosporium has been grown on PVC in a mineral salt agar.{{rp|76}} P. chrysosporium, Lentinus tigrinus, A. niger, and A. sydowii can also effectively degrade PVC.{{rp|122}}
• Phenol-formaldehyde, commonly known as Bakelite, is degraded by the white rot fungus P. chrysosporium.{{cite journal | vauthors = Gusse AC, Miller PD, Volk TJ | title = White-rot fungi demonstrate first biodegradation of phenolic resin | journal = Environmental Science & Technology | volume = 40 | issue = 13 | pages = 4196–9 | date = July 2006 | pmid = 16856735 | doi = 10.1021/es060408h | bibcode = 2006EnST...40.4196G }}
• Acinetobacter has been found to partially degrade low-molecular-weight polyethylene oligomers.{{cite journal | vauthors = Tokiwa Y, Calabia BP, Ugwu CU, Aiba S | title = Biodegradability of plastics | journal = International Journal of Molecular Sciences | volume = 10 | issue = 9 | pages = 3722–42 | date = August 2009 | pmid = 19865515 | pmc = 2769161 | doi = 10.3390/ijms10093722 | doi-access = free | author-link = Yutaka Tokiwa }} When used in combination, Pseudomonas fluorescens and Sphingomonas can degrade over 40% of the weight of plastic bags in less than three months.{{cite web|url=http://woohooreport.com/2009/09/wci-student-isolates-microbe-that-lunches-on-plastic-bags/|publisher=The Record.com|title=CanadaWorld – WCI student isolates microbe that lunches on plastic bags|url-status=dead|archive-url=https://web.archive.org/web/20110718081923/http://woohooreport.com/2009/09/wci-student-isolates-microbe-that-lunches-on-plastic-bags/|archive-date=July 18, 2011}} The thermophilic bacterium Brevibacillus borstelensis (strain 707) was isolated from a soil sample and found capable of using low-density polyethylene as a sole carbon source when incubated at 50 °C. Pre-exposure of the plastic to ultraviolet radiation broke chemical bonds and aided biodegradation; the longer the period of UV exposure, the greater the promotion of the degradation.{{cite journal | vauthors = Hadad D, Geresh S, Sivan A | title = Biodegradation of polyethylene by the thermophilic bacterium Brevibacillus borstelensis | journal = Journal of Applied Microbiology | volume = 98 | issue = 5 | pages = 1093–100 | date = 2005 | pmid = 15836478 | doi = 10.1111/j.1365-2672.2005.02553.x | s2cid = 2977246 | doi-access = }}
• Hazardous molds have been found aboard space stations that degrade rubber into a digestible form.{{cite web|url=https://science.nasa.gov/science-news/science-at-nasa/2007/11may_locad3/| vauthors = Bell TE |year=2007|title=Preventing "Sick" Spaceships }}
• Several species of yeasts, bacteria, algae and lichens have been found growing on synthetic polymer artifacts in museums and at archaeological sites.{{cite journal | vauthors = Cappitelli F, Sorlini C | title = Microorganisms attack synthetic polymers in items representing our cultural heritage | journal = Applied and Environmental Microbiology | volume = 74 | issue = 3 | pages = 564–9 | date = February 2008 | pmid = 18065627 | pmc = 2227722 | doi = 10.1128/AEM.01768-07 | bibcode = 2008ApEnM..74..564C }}
• In the plastic-polluted waters of the Sargasso Sea, bacteria have been found that consume various types of plastic; however, it is unknown to what extent these bacteria effectively clean up poisons rather than simply release them into the marine microbial ecosystem.
• Plastic-eating microbes also have been found in landfills.{{Cite journal | vauthors = Zaikab GD |date=March 2011 |title=Marine Microbes Digest Plastic |url=http://www.nature.com/news/2011/110328/full/news.2011.191.html |journal=Nature |doi=10.1038/news.2011.191|doi-access=free }}
• Nocardia can degrade PET with an esterase enzyme.{{Cite journal |last1=Sharon |first1=Chetna |last2=Sharon |first2=Madhuri |date=2012 |title=Studies on Biodegradation of Polyethylene terephthalate: A synthetic polymer |url=https://www.researchgate.net/publication/306202944 |journal=Journal of Microbiology and Biotechnology Research |volume=2 |issue=2 |via=ResearchGate}}
• The fungus Geotrichum candidum, found in Belize, has been found to consume the polycarbonate plastic found in CDs.{{Cite journal | vauthors = Bosch X |date=2001 |title=Fungus Eats CD |url=http://www.nature.com/news/1998/010628/full/news010628-11.html |journal=Nature |doi=10.1038/news010628-11}}{{Cite news |date=June 22, 2001 |title=Fungus 'Eats' CDs |work=BBC News |url=http://news.bbc.co.uk/2/hi/science/nature/1402533.stm}}
• Futuro houses are made of fiberglass-reinforced polyesters, polyester-polyurethane, and PMMA. One such house was found to be harmfully degraded by Cyanobacteria and Archaea.{{cite journal | vauthors = Cappitelli F, Principi P, Sorlini C | title = Biodeterioration of modern materials in contemporary collections: can biotechnology help? | journal = Trends in Biotechnology | volume = 24 | issue = 8 | pages = 350–4 | date = August 2006 | pmid = 16782219 | doi = 10.1016/j.tibtech.2006.06.001 }}{{cite journal | vauthors = Rinaldi A | title = Saving a fragile legacy. Biotechnology and microbiology are increasingly used to preserve and restore the world's cultural heritage | journal = EMBO Reports | volume = 7 | issue = 11 | pages = 1075–9 | date = November 2006 | pmid = 17077862 | pmc = 1679785 | doi = 10.1038/sj.embor.7400844 }}

File:TriagemDeLixo.jpg

{{Excerpt|Plastic recycling}}

By heating to above 500 °C (932 °F) in the absence of oxygen (pyrolysis), plastics can be broken down into simpler hydrocarbons, which can be used as feedstocks for the fabrication of new plastics.{{Cite web |last=Tullo |first=Alexander |date=October 10, 2022 |title=Amid controversy, industry goes all in on plastics pyrolysis |url=https://cen.acs.org/environment/recycling/Amid-controversy-industry-goes-plastics-pyrolysis/100/i36 |access-date=January 17, 2023 |website=Chemical & Engineering News}} These hydrocarbons can also be used as fuels.{{cite web | vauthors = Narayanan S | url = http://www.hindu.com/mp/2005/12/19/stories/2005121900140300.htm | title = The Zadgaonkars turn carry-bags into petrol! | work = The Hindu | date = December 12, 2005 | archive-url = https://web.archive.org/web/20121109220245/http://www.hindu.com/mp/2005/12/19/stories/2005121900140300.htm | access-date = July 1, 2011 | archive-date = November 9, 2012 }}

{{See also|Ethylene#Greenhouse_gas_emissions|Plastic_pollution#Plastic_pollution_as_a_cause_of_climate_change}}

According to the Organisation for Economic Co-operation and Development, plastic contributed greenhouse gases in the equivalent of 1.8 billion tons of carbon dioxide ({{CO2}}) to the atmosphere in 2019, 3.4% of global emissions.{{cite web |url=https://www.oecd.org/environment/plastics/increased-plastic-leakage-and-greenhouse-gas-emissions.htm |title=Plastic leakage and greenhouse gas emissions are increasing |publisher=OECD |date= |access-date=August 11, 2022}} They say that by 2060, plastic could emit 4.3 billion tons of greenhouse gas a year. The effect of plastics on global warming is mixed. Plastics are generally made from fossil gas or petroleum; thus, the production of plastics creates further fugitive emissions of methane when the fossil gas or petroleum is produced. Additionally, much of the energy used in plastic production is not sustainable energy; for example, high temperature from burning fossil gas. However, plastics can also limit methane emissions; for example, packaging to reduce food waste.{{Cite web |title=How is plastic made? Climate change is a key ingredient {{!}} Friends of the Earth |url=https://friendsoftheearth.uk/plastics/how-is-plastic-made |access-date=2024-02-16 |website=friendsoftheearth.uk |language=en}}

A study from 2024 found that compared to glass and aluminum, plastic may actually have less of a negative effect on the environment and therefore might be the best option for must food packaging and other common uses.{{Cite journal |last1=Meng |first1=Fanran |last2=Brandão |first2=Miguel |last3=Cullen |first3=Jonathan M |date=2024-02-13 |title=Replacing Plastics with Alternatives Is Worse for Greenhouse Gas Emissions in Most Cases |journal=Environmental Science & Technology |language=en |volume=58 |issue=6 |pages=2716–2727 |doi=10.1021/acs.est.3c05191 |issn=0013-936X |pmc=10867844 |pmid=38291786|bibcode=2024EnST...58.2716M }} The study found that, "replacing plastics with alternatives is worse for greenhouse gas emissions in most cases." and that the study involving European researchers found, "15 of the 16 applications a plastic product incurs fewer greenhouse gas emissions than their alternatives."

Production of plastics from crude oil requires 7.9 to 13.7 kWh/lb (taking into account the average efficiency of US utility stations of 35%). Producing silicon and semiconductors for modern electronic equipment is even more energy consuming: 29.2 to 29.8 kWh/lb for silicon, and about 381 kWh/lb for semiconductors.{{cite web | vauthors = De Decker K | veditors = Grosjean V | date = June 2009 |title=The monster footprint of digital technology|url=http://www.lowtechmagazine.com/2009/06/embodied-energy-of-digital-technology.html|access-date=April 18, 2017|publisher=Low-Tech Magazine}} This is much higher than the energy needed to produce many other materials. For example, to produce iron (from iron ore) requires 2.5-3.2 kWh/lb of energy; glass (from sand, etc.) 2.3–4.4 kWh/lb; steel (from iron) 2.5–6.4 kWh/lb; and paper (from timber) 3.2–6.4 kWh/lb.{{cite web|date=December 26, 2014|title=How much energy does it take (on average) to produce 1 kilogram of the following materials?|url=http://www.lowtechmagazine.com/what-is-the-embodied-energy-of-materials.html|access-date=April 18, 2017|publisher=Low-Tech Magazine}}

Quickly burning plastics at very high temperatures breaks down many toxic components, such as dioxins and furans. This approach is widely used in municipal solid waste incineration. Municipal solid waste incinerators also normally treat the flue gas to decrease pollutants further, which is needed because uncontrolled incineration of plastic produces carcinogenic polychlorinated dibenzo-p-dioxins.{{cite journal | vauthors = Halden RU | title = Plastics and health risks | journal = Annual Review of Public Health | volume = 31 | pages = 179–94 | date = 2010 | issue = 1 | pmid = 20070188 | doi = 10.1146/annurev.publhealth.012809.103714 | doi-access = free }} Open-air burning of plastic occurs at lower temperatures and normally releases such toxic fumes.

In the European Union, municipal waste incineration is regulated by the Industrial Emissions Directive,{{Cite journal |last1=Romero |first1=Lina M. |last2=Lyczko |first2=Nathalie |last3=Nzihou |first3=Ange |last4=Antonini |first4=Gérard |last5=Moreau |first5=Eric |last6=Richardeau |first6=Hubert |last7=Coste |first7=Christophe |last8=Madoui |first8=Saïd |last9=Durécu |first9=Sylvain |date=July 2020 |title=New insights on mercury abatement and modeling in a full-scale municipal solid waste incineration flue gas treatment unit |journal=Waste Management |language=en |volume=113 |pages=270–279 |doi=10.1016/j.wasman.2020.06.003|pmid=32559697 |bibcode=2020WaMan.113..270R |s2cid=219948357 |doi-access=free }} which stipulates a minimum temperature of 850 °C for at least two seconds.{{Cite journal |last1=Janhäll |first1=Sara |last2=Petersson |first2=Mikaela |last3=Davidsson |first3=Kent |last4=Öman |first4=Tommy |last5=Sommertune |first5=Jens |last6=Kåredal |first6=Monica |last7=Messing |first7=Maria E. |last8=Rissler |first8=Jenny |date=October 2021 |title=Release of carbon nanotubes during combustion of polymer nanocomposites in a pilot-scale facility for waste incineration |journal=NanoImpact |language=en |volume=24 |pages=100357 |doi=10.1016/j.impact.2021.100357|pmid=35559816 |s2cid=239252029 |doi-access=free |bibcode=2021NanoI..2400357J }}

The bacterium Blaptica dubia is claimed to help degradation of commercial polysterene. This biodegradation seems to occur in some plastic degrading bacteria inhabiting the gut of cockroaches. The biodegradation products have been found in their feces too.{{cite journal | vauthors = Li MX, Yang SS, Ding J, Ding MQ, He L, Xing DF, Criddle CS, Benbow ME, Ren NQ, Wu WM |title= Cockroach Blaptica dubia biodegrades polystyrene plastics: Insights for superior ability, microbiome and host genes |journal= J Hazard Mater |date=November 5, 2024 | volume = 479| issue = |pages=135756|doi=10.1016/j.jhazmat.2024.135756

|pmid=39255668|bibcode= 2024JHzM..47935756L | url=https://www.sciencedirect.com/science/article/pii/S0304389424023355|url-access=subscription}}

{{For timeline|Timeline of plastic development}}

The development of plastics has evolved from the use of naturally plastic materials (e.g., gums and shellac) to the use of the chemical modification of those materials (e.g., natural rubber, cellulose, collagen, and milk proteins), and finally to completely synthetic plastics (e.g., bakelite, epoxy, and PVC). Early plastics were bio-derived materials such as egg and blood proteins, which are organic polymers. In around 1600 BC, Mesoamericans used natural rubber for balls, bands, and figurines.{{cite journal | vauthors = Andrady AL, Neal MA | title = Applications and societal benefits of plastics | journal = Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences | volume = 364 | issue = 1526 | pages = 1977–84 | date = July 2009 | pmid = 19528050 | pmc = 2873019 | doi = 10.1098/rstb.2008.0304 }} Treated cattle horns were used as windows for lanterns in the Middle Ages.{{fact|date=February 2025}} Materials that mimicked the properties of horns were developed by treating milk proteins with lye. In the nineteenth century, as chemistry developed during the Industrial Revolution, many materials were reported. The development of plastics accelerated with Charles Goodyear's 1839 discovery of vulcanization to harden natural rubber.

File:Alexander Parkes Blue Plaque.jpg

Parkesine, invented by Alexander Parkes in 1855 and patented the following year,{{cite book|last=UK Patent office|title=Patents for inventions|year=1857|publisher=UK Patent office|page=255|url=https://books.google.com/books?id=0nCoU-2tAx8C&pg=PA255}} is considered the first man-made plastic. It was manufactured from cellulose (the major component of plant cell walls) treated with nitric acid as a solvent. The output of the process (commonly known as cellulose nitrate or pyroxilin) could be dissolved in alcohol and hardened into a transparent and elastic material that could be molded when heated.{{cite web |url=http://www.websters-online-dictionary.org/ce/celluloid.html |title=Dictionary – Definition of celluloid |publisher=Websters-online-dictionary.org |access-date=October 26, 2011 |url-status=dead |archive-url=https://web.archive.org/web/20091211220823/http://www.websters-online-dictionary.org/ce/celluloid.html |archive-date=December 11, 2009 }} By incorporating pigments into the product, it could be made to resemble ivory. Parkesine was unveiled at the 1862 International Exhibition in London and garnered for Parkes the bronze medal.{{cite book| vauthors = Fenichell S |title=Plastic : the making of a synthetic century|date=1996|publisher=HarperBusiness|location=New York|isbn=978-0-88730-732-4|page=[https://archive.org/details/plasticmakingofs00feni/page/17 17]|url-access=registration|url=https://archive.org/details/plasticmakingofs00feni}}

In 1893, French chemist Auguste Trillat discovered the means to insolubilize casein (milk proteins) by immersion in formaldehyde, producing material marketed as galalith. In 1897, mass-printing press owner Wilhelm Krische of Hanover, Germany, was commissioned to develop an alternative to blackboards.{{cite web|url=http://www.ganoksin.com/borisat/nenam/milk-stone.htm|title=Jewelry Stone Make of Milk| vauthors = Trimborn C |publisher=GZ Art+Design|date=August 2004|access-date=May 17, 2010}} The resultant horn-like plastic made from casein was developed in cooperation with the Austrian chemist (Friedrich) Adolph Spitteler (1846–1940). Although unsuitable for the intended purpose, other uses would be discovered.

The world's first fully synthetic plastic was Bakelite, invented in New York in 1907 by Leo Baekeland, who coined the term plastics. Many chemists have contributed to the materials science of plastics, including Nobel laureate Hermann Staudinger, who has been called "the father of polymer chemistry", and Herman Mark, known as "the father of polymer physics". After World War I, improvements in chemistry led to an explosion of new forms of plastics, with mass production beginning in the 1940s and 1950s.{{cite journal | vauthors = Thompson RC, Swan SH, Moore CJ, vom Saal FS | title = Our plastic age | journal = Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences | volume = 364 | issue = 1526 | pages = 1973–6 | date = July 2009 | pmid = 19528049 | pmc = 2874019 | doi = 10.1098/rstb.2009.0054 }} Among the earliest examples in the wave of new polymers were polystyrene (first produced by BASF in the 1930s) and polyvinyl chloride (first created in 1872 but commercially produced in the late 1920s). In 1923, Durite Plastics, Inc., was the first manufacturer of phenol-furfural resins.{{cite web|url=http://www.furan.com/furfural_historical_overview.html|title=Historical Overview and Industrial Development|website=International Furan Chemicals, Inc.|access-date=May 4, 2014}} In 1933, polyethylene was discovered by Imperial Chemical Industries (ICI) researchers Reginald Gibson and Eric Fawcett.

The discovery of polyethylene terephthalate (PETE) is credited to employees of the Calico Printers' Association in the UK in 1941; it was licensed to DuPont for the US and ICI otherwise, and as one of the few plastics appropriate as a replacement for glass in many circumstances, resulting in widespread use for bottles in Europe. In 1954 polypropylene was discovered by Giulio Natta and began to be manufactured in 1957. Also in 1954 expanded polystyrene (used for building insulation, packaging, and cups) was invented by Dow Chemical. Since the 1960s, plastic production has surged with the advent of polycarbonate and HDPE, widely used in various products.{{Cite journal |last1=Tratzi |first1=Patrizio |last2=Giuliani |first2=Chiara |last3=Torre |first3=Marco |last4=Tomassetti |first4=Laura |last5=Petrucci |first5=Roberto |last6=Iannoni |first6=Antonio |last7=Torre |first7=Luigi |last8=Genova |first8=Salvatore |last9=Paolini |first9=Valerio |last10=Petracchini |first10=Francesco |last11=Di Carlo |first11=Gabriella |date=2021-09-01 |title=Effect of Hard Plastic Waste on the Quality of Recycled Polypropylene Blends |journal=Recycling |language=en |volume=6 |issue=3 |pages=58 |doi=10.3390/recycling6030058 |doi-access=free |issn=2313-4321|hdl=11573/1672407 |hdl-access=free }} In the 1980s and 1990s, plastic recycling and the development of biodegradable plastics began to flourish to mitigate environmental impacts.{{Cite journal |last1=Keith |first1=Matthew |last2=Koller |first2=Martin |last3=Lackner |first3=Maximilian |date=2024-01-01 |title=Carbon Recycling of High Value Bioplastics: A Route to a Zero-Waste Future |journal=Polymers |language=en |volume=16 |issue=12 |pages=1621 |doi=10.3390/polym16121621 |doi-access=free |pmid=38931972 |issn=2073-4360|pmc=11207349 }}{{Cite web |title=Bao bì vinpack |url=https://baobivinpack.com |access-date=2025-01-06 |language=en}} From 2000 to the present, bioplastics from renewable sources and awareness of microplastics have spurred extensive research and policies to control plastic pollution.{{Cite web |last=Jensen |first=Heidi |date=2019-04-01 |title=Now and Then: A Look Back at 30 Years of Recycling |url=https://wasteadvantagemag.com/now-and-then-a-look-back-at-30-years-of-recycling/?form=MG0AV3 |access-date=2025-01-06 |website=Waste Advantage Magazine |language=en-US}}

{{See also|Global plastic pollution treaty}}

Work is currently underway to develop a global treaty on plastic pollution. On March 2, 2022, UN Member States voted at the resumed fifth UN Environment Assembly (UNEA-5.2) to establish an Intergovernmental Negotiating Committee (INC) with the mandate of advancing a legally-binding international agreement on plastics.{{Cite news |last1=Geddie |first1=John |last2=Brock |first2=Joe |date=March 2, 2022 |title='Biggest green deal since Paris': UN agrees plastic treaty roadmap |language=en |work=Reuters |url=https://www.reuters.com/business/environment/biggest-green-deal-since-paris-un-agrees-plastic-treaty-roadmap-2022-03-02/ |access-date=August 3, 2022}} The resolution is entitled "End plastic pollution: Towards an international legally binding instrument." The mandate specifies that the INC must begin its work by the end of 2022 with the goal of "completing a draft global legally binding agreement by the end of 2024."{{cite web |date=March 2, 2022 |title=Historic day in the campaign to beat plastic pollution: Nations commit to develop a legally binding agreement |url=http://www.unep.org/news-and-stories/press-release/historic-day-campaign-beat-plastic-pollution-nations-commit-develop |access-date=August 3, 2022 |website=UN Environment |language=en}}

{{colbegin |colwidth=25em}}

• {{Annotated link |American Recyclable Plastic Bag Alliance}}
• {{Annotated link |Corn construction}}
• {{Annotated link |Light activated resin}}
• {{Annotated link |Organic light emitting diode}}
• {{Annotated link |Plastic film}}
• {{Annotated link |Plastic pollution}}
• {{Annotated link |Plastics engineering}}
• {{Annotated link |Plasticulture}}
• {{Annotated link |Plastisphere}}
• {{Annotated link |Refill (scheme)}}
• {{Annotated link |Roll-to-roll processing}}
• {{Annotated link |Self-healing plastic}}
• {{Annotated link |Thermal cleaning}}
• {{Annotated link |Thermoforming}}
• {{Annotated link |Timeline of materials technology}}

Plastic in the sense of malleable

• {{Annotated link |Plastic arts}}
• {{Annotated link |Plastic ratio}}

{{colend}}

{{reflist|colwidth=30em}}

• Substantial parts of this text originated from {{usurped|1=[https://web.archive.org/web/20070810225820/http://www.vectorsite.net/ttplast.html An Introduction to Plastics v1.0]}} by Greg Goebel (March 1, 2001), which is in the public domain.

• {{Free-content attribution

| title = Drowning in Plastics – Marine Litter and Plastic Waste Vital Graphics

| publisher = United Nations Environment Programme

| documentURL = https://www.unep.org/resources/report/drowning-plastics-marine-litter-and-plastic-waste-vital-graphics

| license statement URL = https://commons.wikimedia.org/wiki/File:United_Nations_Environment_Programme_Drowning_in_Plastics_%E2%80%93_Marine_Litter_and_Plastic_Waste_Vital_Graphics.pdf

| license = Cc BY-SA 3.0 IGO

}}

• {{cite book |isbn=978-1-56990-935-5 |title=Training in Plastics Technology |last1=Hopmann |first1=Christian |last2=Greif |first2=Helmut |last3=Wolters |first3=Leo |date=8 December 2023 |publisher=Carl Hanser Verlag GmbH & Company KG }}
• {{cite book |title=Future Trends in Modern Plastics|author=Fink, Johannes Karl|isbn= 978-1394237579|year = 2024|publisher=Wiley}}
• {{cite book |isbn=978-0-323-91435-2 |title=Circularity of Plastics: Sustainability, Emerging Materials, and Valorization of Waste Plastic |last1=Li |first1=Zibiao |last2=Lim |first2=Jason Y. C. |last3=Wang |first3=Chen-Gang |date=21 February 2023 |publisher=Elsevier }}

{{Commons category|Plastics}}

{{Wikiquote}}

• {{cite web | url = http://americanhistory.si.edu/archives/d8008.htm | title = J. Harry Dubois Collection on the History of Plastics, ca. 1900–1975 | work = Archives Center, National Museum of American History, Smithsonian Institution. | archive-url = https://web.archive.org/web/20060212130150/http://americanhistory.si.edu/archives/d8008.htm | archive-date = February 12, 2006 }}
• {{cite web | url = http://www.plasticsintl.com/sortable_materials.php?display=mechanical | title = Material Properties of Plastics – Mechanical, Thermal & Electrical Properties | work = Plastics International | archive-url = https://web.archive.org/web/20170324052637/http://www.plasticsintl.com/sortable_materials.php?display=mechanical | archive-date = March 24, 2017 }}
• {{cite web | url = http://www.plastiquarian.com/ | title = Plastics Historical Society }}
• {{cite web | url = http://www.plasticsindustry.org/AboutPlastics/content.cfm?ItemNumber=670&navItemNumber=1117 | title = History of plastics, Society of the Plastics Industry | work = plasticsindustry.org | archive-url = https://web.archive.org/web/20090706054409/http://www.plasticsindustry.org/AboutPlastics/content.cfm?ItemNumber=670&navItemNumber=1117 | archive-date = July 6, 2009 }}
• {{cite web | vauthors = Knight L | date = May 17, 2014| url = https://www.bbc.com/news/magazine-27442625 | title = A brief history of plastics, natural and synthetic | work = BBC Magazine }}
• {{cite web | url = http://www.tangram.co.uk/TI-Polymer-Timeline.html | title = Timeline of important milestone of plastic injection moulding and plastics | date = June 27, 2014

| work = Tangram Technology Ltd }}

{{Plastics}}

{{Labeling}}

{{Rubber}}

{{Sculptures}}

{{Human impact on the environment}}

{{Technology topics}}

{{HealthIssuesOfPlastics}}

{{Authority control}}

Category:Dielectrics

Category:Articles containing video clips